Please check VIM3 USB Burn Firmware Page or VIM3L USB Burn Firmware Page to download the ROM for USB burning.
ROM Infos:
Version(Latest): vim3/vim3l-android-9-64bit-v240626.img.xz Update List:
- Screen Position: improve the corresponding zoom function of adding custom HDMI resolution
- M2X: fix the issue of the M2X expansion board network port not working on VIM3L
- Support OTA function
- Remove the USB permission pop-up window
- Increase the MAC address of Ethernet and WIFI in network information
- Compatible with physical keyboard and soft keyboard simultaneously
Version: vim3/vim3l-android-9-64bit-v231122.img.xz Update List:
- LED: Fix the problem that the white LED light does not turn on until 6s after the VIM3L is turned on
- GPIO: fix gpio control on bl2
- RSDB: add wifi rsdb support on VIM3L
- WIFI: open wifi sta and AP coexistence mode
- M2X: Add M2X extended version detection
- Upgrade: update system with OTAUpgrade2 application only
- TP: TS101 updates tp register configuration
- IR: Add receive_scancode node to obtain raw data on IR Receiver
- M2X: Fixed the issue where selecting M2X Ethernet and sleeping in standby mode would cause the kernel to crash and then restart — open pcie settings and then sleep
- preinstall: Remove Aptoide apk
- sound/soc: es8316: Optimize es8316 codecs
- VIM3L: Rotation: Restart after rotating to vertical screen. It takes a long time to enter the Launcher interface again before rotating to vertical screen
- Set VIM3 vendor.camera.mirror to false
Version: vim3-android-9-64bit-v230719.img.xz/vim3l-android-9-64bit-v230725.img.xz Update List:
- LCD: VIM3: Fix the abnormal display problem of TS101 connected to TS101 and HDMI at the same time to restore factory settings
- LCD: VIM3L: Solve the problem that the boot logo may not be displayed when connected to TS101 and HDMI at the same time
- LCD: Fix the problem of abnormal display when restoring the factory when single-connected to TS101
- Camera: Fix the problem that the camera cannot be opened after the setting [Camera ir-cut] is turned on when using the IMX415 camera
- Camera: add camera detection support
- WIFI: add connect button for WiFi menu
- EDID: add edid-decode support
- Extboard: add logo led control mode
- GPS: Turn on network targeting by default
- GPS: GPS positioning is high-precision by default
- GPS: Default USB GPS positioning
- HDMI: update the clk parameter of HDMI 1600x900 resolution
- Factory: VIM3: repair factory test SPI failure
- 4G: 4G add gps support
- 4G: Fix the problem that the 4G network cannot be used due to the addition of the 4G GPS function
- NPU: update npu to 6.4.8.7
- NPU: add yolo_v8n yolo_v7_tiny model
- BT: VIM3L: repair bluetooth headset no sound
- UART: enable VIM3 uart_C
Version: vim3-android-9-64bit-v230408.img.xz Update List:
- update 1024x600 resolution timimg parameter
- Add LCD：TS101 parameter
- Add TP：GT9xx driver
- Compatible camera with both OS08A10 and IMX415
- VIM3/VIM3L: Add some different screensaver startup time: 15 seconds, 30 seconds, 1 minute, 2 minutes, 10 minutes
- Logo: Replace with VIM3L a new boot Logo
- VIM3/VIM3L: Add virtual TP driver
- update 2560x1600 resolution timimg parameter
- Customize the function key as the home key by default
- VIM3/VIM3L: Fix the problem that the TF card in the drop-down status bar of the original Setting, and the U disk browsing option cannot be clicked to jump
- VIM3/VIM3L: Remove the TF card in the original Setting status bar, the pop-up option of the U disk, and the pop-up function is in the Droid Setting
- Add analog I2C read TP register
- The optimized factory test app does not appear in the list of recent programs
- LCD: Add new TS050 parameter
- LCD: Compatible with OLD_TS050, TS101, NEW_TS050
- Launcher: After modifying to lower than the default UI resolution, there is a problem that the horizontal and vertical screens cannot be switched
- LCD: Solve the problem of not being able to boot when connected to HDMI and TS101 at the same time
- LCD: When HDMI and TS101 are connected at the same time, set TS101 to HDMI to display the logo before TS101, otherwise HDMI will display a green screen when no signal is detected
- Set Ethernet priority back over WiFi network
- TP: Fix the possibility that the new TS050-5-inch screen cannot be touched after power off and restart
- VIM3L: KeyBoar: Solve the problem that the Q key on the USB keyboard does not work and the Enter key is incorrectly defined due to the lack of definition of key 16 Q
Version: vim3-android-9-64bit-v230130.img.xz Update List:
- APK：Add Google Chrome largefile apk
- add cmdserver and cmdclient
- add selinux for vim3 vim3l hardware function
- disable discovery bounce animation
- es8316 add headset insert judge
- vim3l add audio es8316 support
- vim3l enable uart_C and saradc
- fix when exit bluetooth menu,keep device visible
- Add native ui enable menu
- fix enable Camera2 application if the device has mipi camera
- Fix warning: unused variable when compiling
- Add adc function key customize support
- Update logo by usb’s bootup.bmp file
- Add hardware version VIM3_V14
- Camera: Add custom DIY camera IMX415 support
- Remove the developer options — Select USB Configuration
- Gsensor: Modify the default direction of Gsensor
- Revert “vim3_64bit：APP: Remove redundant DocumentsUI manager”
- HDMI: update 800x480 resolution timimg parameter
Version: vim3-android-9-64bit-v221214.img.xz Update List:
- Fix vim3_64bit bluetooth remote control device pairing list is not fully displayed
- Fix Gateway, Network prefix length, DNS1, DNS2 lost focus in Ethernet static IP settings and cannot pop up the soft keyboard
- fix ethernet issue
- get ethernet mac address from command line or DTB
- Solve the stretching problem of vim3_64bit setting wallpaper and the probability that half of the wallpaper setting will be displayed as black
- add wol wakeup support
- default set sdcard power to 3v3
- fix fdt cmd get issue
- Add battery manager driver support and remove battery log
- fixup vim3_64bit HDR always enable
- add more USB ethernet model support
- Add factory test script
- Complete the missing kerne configl patch on 64bit
Version: vim3-android-9-64bit-v221129.img.xz Update List:
- Force all APPs to display horizontally
- vim3_64bit remote control long press the middle button does not work
- add APK preinstall support
- Remove automatic hibernation, if you need hibernation, set it manually
- add extend board detect support
- Solve FileBrowser can not copy and paste
- Resolve compile-time warnings generated
- fix mac addr error
- vim3_64bit boots the OW system from the SD card and the CPU cannot be online
- Update the WiFi module of AP6398
- Remove redundant DocumentsUI manager
- Fix vim3_64bit firmware reset to factory settings and Kernel panic
- Add support for editing date and time with mouse
Version: vim3-android-9-64bit-v221028.img.xz Update List:
- Modify the width of the drop-down notification bar to fit the screen width
- add root support
- fixup Navigation bar display problem when chagne density
- fixup Navigation display problem when rotate 90 or 270 degree
- add vesa resolutions support
480x320p60hz
640x480p60hz
800x480p60hz
800x600p60hz
1024x600p60hz
1024x768p60hz
1280x480p60hz
1280x800p60hz
1280x1024p60hz
1360x768p60hz
1440x900p60hz
1600x900p60hz
1600x1200p60hz
1680x1050p60hz
1920x1200p60hz
2560x1080p60hz
2560x1440p60hz
2560x1600p60hz
3440x1440p60hz - Solve the problem of no KHADAS logo when booting with 2560x1440 resolution on vim3_64bit
- Multi USB Camera Support hotplug
- Two external USB cameras, click the switch camera button icon, can not switch to the second camera screen
- Fix vim3_64bit setting screen rotation 90 degrees and 270 degrees incomplete display
- add google apps
- add the “Never” timeout option in sleep menu
- add force boot from SD check
- vim3_64bit add cfgload and script command support
- add ext_board_exist and vim3 extend board detect
- update vim3_64bit firmware version information
