[ROM] SC VIM3 Pie ATV Debug/User builds v4 20210309/10

Hi there guys and girls, one more rom/fw for you all!
Many thks to Khadas for sending me the device to play
And many thks to @Robert for be my beta tester :wink:
This rom is as “TRUE” to AndroidTV as possible…
Build from Latest source.

READ RECOMMENDATIONS BELLOW!!!

IF YOU HAVE TO MANY ISSUES IN THE BUILD AFTER FLASH EVEN IF THE FLASH WENT OK, JUST REFLASH AGAIN THE IMG BECAUSE YOU GOT A BAD FLASH EVEN IF IT SAID IT WAS OK.


Differences of USER and USERDEBUG builds:

User Build : This build is done to be as close to a company rls as possible, it does not have root or twrp and is compiled with rls keys and SELINUX enforced, what this means for you?
Well it means lot more apps show in Playstore that didn’t show before, (EX: my isp androidtv live tv app, only shows in Playstore non rooted and SELINUX enforced devices, also the streams in the app does not even play in rooted devices.). Like this there’s lots of other ISP/NON ISP apps Out there…

UserDebug Build: This build does have root, twrp, selinux is permissive and some other stuff you will see in changelog down there…, but of course you will lose the above…


Changelog v4:

  • Used latest sdk.
  • Added “Picture” to “Advanced Settings” (Read Recommendations bellow)
  • Fixed screenshot button in navigation bar.
  • Added dovi!
  • Some cleaning etc…
  • And lots of other stuff, i can’t remember now all the changes, check it out by yourselves.

Recommendations:

  • On the ATV build i do recommend you guys to go to playstore and manually update the default google apps, and then restart the box.
  • I do recommend if you guys have issues playing some Dolby Digital audio, to go to “settings->Device Preferences->Sound”, and in there in “Select formats” set it to “Manual:Select which formats to use”, and them just manually enable all formats.
  • This is because there is an few issues how the sdk detects the formats being used in some videos with Dolby Digital audio, remember this will not mean you will have DTS-HD support or even Dolby Atmos, since the required libs are not there to have that support!
  • I also recommend on both builds to disable the “DNR” and also play with the “Picture Mode”, for that go to “settings->Advanced Settings->Picture”.

Bugs?:

  • No TWRP at the moment.
  • Of course there is bugs… there always be bugs…

Want to buy me a beer?


Download SC v4 IMG’s:


OLD Build’s IMG’s:


Install instructions:

  • Use usb burning tool 2.2.0 to burn the IMG.
  • More information on how to put the device in flash mode refer to khadas wiki!

THIS ROM DELETES ALL YOUR DATA SO DO A BACKUP!

USE AT YOUR OWN RISK!

Enjoy it :slight_smile:

10 Likes

Any hopes this comes to vim2

I don’t think so mate, unless amlogic gives support for s912 in Pie…which i don’t think it will happen :frowning:

can i use it with the VIM3 1.2 ?

i don’t see why not!

Ok. I give it a try :slight_smile:

Do you still Working on the Rom?

At the moment no, have other stuff (like work) to do.
But i will update it again if you asking that, but i think for now is good enough!

1 Like

mhh… i cannot continue after entering the WLAN Passwort.

does the NIC Interface not working?

yes it works, at least in mine works just fine!
What you mean you can’t continue after you enter wifi password?!

I enter the key. Press okay and nothing happens.
So my ethernet is defect only wifi on „coreelec“ is working

I change the Language to german…

do you have khadas remote?

no, just used keyboard.
But i have a logitech Harmony.

@superceleron @eviltrooper
I have added a ‘start connect’ button for it . You can refer to the commit


HI terry, thks i will check it :slight_smile:

Hello!

Khadas Vim3 not easy to setup… i want install Android TV but i can´t ……

I can install this Android pie

https://dl.khadas.com/Firmware/VIM3/Android/VIM3_Pie_V190809.7z

the name of the file into is: update.img

software: usb burning tool 2.1.7.3

and the answer is: [0x00000000]Burning successfully!!!

But, when i try install someone of this:

SC_VIM3_ATV_BETA1

SC_VIM3_NORMAL_FINAL-v1.0.20190810

The answer is:

[11:49:26 759][HUB1-4][Err]–CheckFileRunState failed

[11:49:26 770][HUB1-4][Err]–[0x10303004]Romcode/Switch status/Identify/Error result

Whats the problem about sofware SC (superceleron) ¿

I try erasing eMMC Storage, but the answer is the same message :Identify Error result

Tanks!

i replied in the other topic!

2 Likes

Does this mean that Google Assistant voice recognition works?
when vim3 + AndroidTV work in 1.2 :wink:

1 Like

yes it means that.
Well in a few days(hopefully), since im really busy now with my job!

3 Likes