VIM3-Android-9-32bit-V230720 ROM Release

Announcements
1

Here release the Android 9.0 ROM, check Firmware Page to download the ROM.

ROM Infos:

Version(Latest): vim3-android-9-32bit-v230720.img.xz Update List:

  • Camera: Fix the problem that the camera cannot be opened after the setting [Camera ir-cut] is turned on when using the IMX415 camera
  • Camera: add camera detection support
  • LCD: Fix the problem of abnormal display when restoring the factory when single-connected to TS101
  • EDID: add edid-decode support
  • TP: Modify the reset delay of ft5x06
  • TvSettings: Fix the display problem of the LED light setting. When the white light mode is selected, the red light mode changes along with it
  • NPU: update npu to 6.4.8.7

Version: vim3-android-9-32bit-v230329.img.xz Update List:

  • Gsensor: Modify the default direction of Gsensor
  • camera: add khadas imx415 camera module support
  • camera: Compatible camera with both OS08A10 and IMX415
  • TP：Add GT9xx driver
  • Logo: Replace with VIM3L a new boot Logo
  • HDMI: update 2560x1600 resolution timimg parameter
  • HDMI: update 1024x600 resolution timimg parameter
  • Disk: Fix the problem that the TF card in the drop-down status bar of the original Setting, and the U disk browsing option cannot be clicked to jump
  • Disk: Remove the TF card in the original Setting status bar, the pop-up option of the U disk, and the pop-up function is in the Droid Setting
  • LCD：Add TS101 parameter
  • LCD: Add new TS050 parameter
  • LCD: Compatible with OLD_TS050, TS101, NEW_TS050
  • LCD: Solve the problem of not being able to boot when connected to HDMI and TS101 at the same time
  • LCD: When HDMI and TS101 are connected at the same time, set TS101 to HDMI to display the logo before TS101, otherwise HDMI will display a green screen when no signal is detected
  • LCD: Fix the abnormal display problem of TS101 connected to TS101 and HDMI at the same time to restore factory settings
  • Launcher: After modifying to lower than the default UI resolution, there is a problem that the horizontal and vertical screens cannot be switched
  • other: Revert “vim3_32bit：APP: Remove redundant DocumentsUI manager”

Version: vim3-android-9-32bit-v221228.img.xz Update List:

  • Add hardware version VIM3_V14
  • Solve the problem of no KHADAS logo when booting with 2560x1440 resolution
  • Fix the error that CONFIG is written as GONFIG in kvim_a32_defconfig
  • Remove redundant DocumentsUI manager
  • Solve the stretching problem of vim3_32bit setting wallpaper and the probability that half of the wallpaper setting will be displayed as black
  • Force all APPs to display horizontally
  • Modify the width of the drop-down notification bar to fit the screen width
  • Solve the problem that the compilation API is too low
  • Two external USB cameras, click the switch camera button icon, can not switch to the second camera screen
  • Update the WiFi module of AP6398
  • Fix bluetooth remote control device pairing list is not fully displayed
  • Fix Gateway, Network prefix length, DNS1, DNS2 lost focus in Ethernet static IP settings and cannot pop up the soft keyboard
  • Add support for editing date and time with mouse
  • Solve FileBrowser can not copy and paste

Version: VIM3_Pie_V211220.7z Update List:

  • fixup camera app can not auto install when plug usb camera
  • enlarge init env arg number to fixup recovery mode reboot issue
  • fixup Navigation bar display problem when chagne density
  • fixup systemui crash when change bootanimation.zip
  • update npu to version 6.4.6.2
  • extend board add logo led control mode
  • fix dts can not work normal issue

Version: VIM3_Pie_V210908.7z Update List:

  • TvSettings add virtual keyboad enable item
  • update google apps
  • fixup 1360x768 resolution display issue
  • fixup display problem caused by add default single hdmi resolution
  • fixup VIM3/VIM3l HDR always enable
  • VIM3/VIM3L add user selinux policy for all hardware function
  • add user build firmware console input support
  • add battery manager driver
  • add es8316 audio driver
  • change system partition size
  • Fix the disconnection problem of 802.1x enterprise WiFi router
  • Fix screen saver can not start problem
  • change ota url

Version: VIM3_Pie_V210527.7z Update List:

  • add Coexistence of WiFi and Ethernet
  • fixup 4G can not get network
  • add single resolution support
    1024x768p60hz
    1440x900p60hz
    640x480p60hz
    1280x1024p60hz
    800x600p60hz
    1680x1050p60hz
    1024x600p60hz
    2560x1600p60hz
    2560x1440p60hz
    2560x1080p60hz
    1920x1200p60hz
    1600x1200p60hz
    1600x900p60hz
    1360x768p60hz
    1280x800p60hz
    480x320p60hz
    800x480p60hz
    1280x480p60hz
  • update amlogic sdk to p-amlogic-openlinux-20201225-ds-ott.xml version
  • update npu sdk version to 6.4.4.3

Version: VIM3_Pie_V210128.7z Update List:

  • add Khadas API support
  • add the function of copying and pasting files in the file browser application
  • update 800x480 HDMI vesa resolution parameter
  • fix ethernet issue for mainline kernel

Version: VIM3_Pie_V201112.7z Update List:

  • fix native ui issue
  • fix bluetooth mic issue
  • fix AP6398S WI-FI module issue
  • update amlogic sdk source code from p-amlogic-openlinux-20200509-ott-aosp.xml to p-amlogic-openlinux-20200831-ds-ott.xml

Version: VIM3_Pie_V200917.7z Update List:

  • add font size control menu
  • add hdmi vesa resolution support
  • add native UI support
  • add density control menu
  • add WI-FI rsdb support
  • add more usb ethernet modules support
  • add customer ircode support on KBI
  • fix recovery display issue

Version: VIM3_Pie_V200624.7z Update List:

  • add camera ir-cut control menu
  • add usb gnss location support
  • add gsensor support
  • add force land menu for application
  • fix usb camera issue
  • add schedule power on/off control menu
  • add sound control menu
  • add m2x board control menu
  • add wakeup support for TS050
  • fix ssd storage format issue

Version: VIM3_Pie_V200319.7z Update List:

  • fix restart issue caused by high temperature
  • fix can’t connect 5G hotpot in some countries
  • add upper status bar control
  • fix gigabit ethernet issue
  • fix network location issue
  • fix bluetooth BLE issue
  • fix add account issue on settings menu

Version: VIM3_Pie_V200103.7z Update List:

  • add os08a10 camera support
  • add screen rotation menu for hdmi only
  • add bluetooth connect menu support
  • add status bar control menu support
  • add wifi hotpot menu support
  • add quectel EM06 4G module support
  • add logitech wifi k400 keyboard support
  • add OTA url for next update
  • fix usb microphone recording noise issue
  • fix wol menu issue
  • fix some display issues
  • fix navigation issue

Version: VIM3_Pie_V191122.7z Update List:

  • add dual display support
  • add TS050 touch panel support
  • add lcd backlight control menu
  • disable network captive portal check
  • change display density from 240 to 280
  • update amlogic sdk source code from p-amlogic_openlinux-20190720_aosp.xml to p-amlogic-openlinux-20191101-ott-aosp.xml

Version: VIM3_Pie_V191101.7z Update List:

  • Add ROOT support (many thks to @superceleron)
  • Add ARGB ColorMatrix support
  • Enter recovery mode when booting system with function key
  • Fix the issue of low running for AnTuTu
  • Update gapps

Version: VIM3_Pie_V190907.7z Update List:

  • add status bar and navigation bar
  • add ‘start connect’ button on wifi menu
  • fix keyboard enter key issue
  • fix fan menu issue
  • add ‘Nerve sleep’ option on display menu
  • add support for HID multitouch pannels
  • set type-c port as device only
  • enable uart port on 40pin GPIO Header
  • add support for GPIO lib
  • update amlogic sdk source code from p-amlogic_openlinux-20190415_aosp.xml to p-amlogic-openlinux-20190720-ott-aosp.xml

Upgrade guidance:

The Android Source Code :

Download Google store code

  1. Modify the file ‘PROJECT/device/khadas/common/kvim.mk’ or ‘PROJECT/device/khadas/kvim3.mk’
    <1> Change the property ‘BUILD_WITH_GAPPS_CONFIG’ from false to true
    #Gapps Build Config
    -BUILD_WITH_GAPPS_CONFIG :=false
    +BUILD_WITH_GAPPS_CONFIG :=true

  2. Download the google repertory into the path ‘PROJECT/vendor/amlogic/’
    <1> cd PROJECT/vendor/amlogic/
    <2> download [VIM3_Android_9_32bit_GMS - Google Drive]

  3. Build yourself ROM again

1 Like