Don’t worry we will solve the problem ASAP.
Yes, he confirmed that it worked on one of the old firmware, but something was wrong with the other, I don’t remember exactly
Oh yeah the Mouse not working problem, but maybe something a bit older ?
older, no support, if only own assembly
Maybe try changing the Display colors, @Vladimir.v.v could you recollect where to change the display colors? the YUV422, RGB, sRGB thing ?
@ThomasHH-DE please elaborate this part for me
droid settings / display /screen resolution / color space settings
yes, thank you, @ThomasHH-DE please change the things @Vladimir.v.v has given above and see if the color changes, regarding the mouse I will need to know more Info
All older ones have a lot of mistakes. The keyboard in particular can only be used to an extremely limited extent. Sometimes with older firmware I cannot use the keyboard at all because the physical keyboard does not output special characters and the touch keyboard is not shown.
Yes, the LTE modem is currently the biggest problem. Without this function, I don’t need to continue testing. I only have time to test this week, then I either have to install the device in the car or just send it back.
Ultimately, it is also good to know how to integrate other hardware.
I’m going to try the older firmware again and report.
Thomas, you tried the firmware from Superceleron, I’m not sure, but maybe there is a solution to the problem
Yeah, that is a good suggestion as well 
, and also contains some of the other superceleron’s goodies 
Now I will send a link
Thomas, please check!
and let us know about the changes. thank
So that’s not possible … I have now tried SC_VIM3_USER_NORMAL-v4.0-20200117.img and SC_VIM3_USER_NORMAL-v5.0-20200210.img. As soon as I click on the “Mobile Network” menu item in the settings, the part crashes 100%.
can someone show me a picture of how far a cell phone card has to be pushed into the card slot? We seem to have a different standard here in Europe. In European devices, you can only push the cell phone card in one direction and only up to a certain point. With this part here you can push the cell phone card through completely. You can’t even know how far you have to push them in.
you need it to be aligned in the middle, it is not any different standard in Europe, its the same thing here but the slot is open in both directions,
@ThomasHH-DE you say that VIM3_Pie_191122 firmware works right, but your problems are the screen and Mouse not working properly.
https://www.youtube.com/watch?v=630eNo85I-U
So the modem is not recognized at all and just crashes when I click on “Mobile Network”
It hadn’t worked properly either. There I had at least the menu item for mobile internet.
@ThomasHH-DE You didn’t toggle the PCIe on , how could it even recognize the device ?
Click on PCIe mode and restart the board, then enable mobile network
If you don’t toggle it and then enable mobile network it will definitely crash over hardware errors