Thank you very much for your reply.
We’ve completed the development of both new firmware(with Khadas VID) and USB driver and our guys are run the testing precess before final release.
Will close in this or next week.
Just a note that we will only release new driver with Khadas VID for Tone1 due to the VID we used is a common evaluation VID, more details from Thesycon below:
So what will be the update process for us with Tone1 first generation?
I think it was an announcement, stay tuned!
good luck to you!
hi any news i need the drivers please
the evaluation driver has ended!
Same for me.
There is a new firmware posted today for Tone1 !
But only a .bin file without any update tool or drivers.
Thanks for info. Looking forward to the rest of the instructions! @Gouwa
@Aldoszx Maybe we can just flash it old way?
Flashed .bin with XMOS-TUSBAudio-EVAL-V4.11.0
Install the Thesyscon Eval Driver with XMOS VID
Run the DFU Tool with XMOS VID to upgrade to new Tone1 image with Khadas VID
Uninstall the Theysycon Eval Driver
So we are here?
Install Khadas USB Driver with Khadas VID
Any updates or time scale?
@Gouwa Did not see your previous post … many thanks for the updates
ASIO support i cannot see?
Khadas_Tone_DFU_Tool_V4.86.0_201118
Khadas_Tone_Driver_V4.86.0_201118
Device Manager

- XMOS_TUSBAudio_eval: Flash the firmware (it’s no longer detect after flash)
- Khadas_Tone_Driver_V4.86.0_201118: Install driver
- Khadas_Tone_DFU_Too: This tool will detect the Tone
Can someone try below to flash since missing DLL, I thought can’t be flash until I install the driver then Khadas_Tone_DFU_Tool works.
- Khadas_Tone_Driver_V4.86.0_201118: Install the driver
- Khadas_Tone_DFU_Tool: use this to flash the Tone (missing DLL if you don’t install driver)
All my DSD and SACD ISO are working with any driver. Make sure to set Buffer 180 + otherwise it will be flag
Hello Folks,
The upgrade instructions are in our blog:
Relevant Links:
- Tone1 - Legacy DFU Tool
- Tone1 - v2.00 Firmware
- Tone1 and 2 - USB Driver (Khadas Audio Dashboard)
- Tone1 and 2 - DFU Tool (New)
Have a good one!
Tonev2 leak confirmed
What? Where?
do not trust him .
image linked above
Let’s move to new thread: