What is the trick to get VIM1.KRESCUE.SD.IMG.GZ to work?

It will not load all the way from SD card.
Shows unknown command mmc@70000

Did get it to work once and loaded Openwrt using OS wizard. That did boot but was unable to log in. So the memory was erased and tried to open KRESCUE again to reinstall and it only shows the Khadas splash screen

After several more attempts it finally loaded and was successful using the OS wizard. Any suggestions as to what am I doing wrong?

Just an FYI regarding the youtube video showing how to install OpenWrt. They show the address to access via wifi as openwrt-vim. That is not correct.

wifi connection is open, connect, then
ssh into the VIM at root@openwrt-khadas

Then $ ifconfig
to get the address:
MDNS: openwrt-khadas.local
WEB: http://openwrt-khadas.local WEB TERM: http://openwrt-khadas.local:8088/

about sd boot problem read there Final release of OpenWrt 19.07.8 for Khadas SBC VIM1 VIM2 VIM3 VIM3L Edge - #75 by hyphop

Just an FYI regarding the youtube video showing how to install OpenWrt. They show the address to access via wifi as openwrt-vim. That is not correct.

maybe video have expired information :wink:

wifi connection is open, connect, then
ssh into the VIM at root@openwrt-khadas

must works !! what a problem ?

1 Like