Has anyone here had any luck getting Apple devices to recognize their Tone 2 Pro?
I own three of the original Tone boards and have had no problems getting iPads and iPhones to see the the Tone 1 using the Apple Lightning to USB3 Camera Adapter.
Hello, I believe what Electr1 was conveying is that no proper USB-C-to-Lightning cable for the Tone2 Pro exists yet. Khadas will add the special cable to their shop soon.
I tested the first solution, with this adapter. And it does not work. Iphone can detect t2p from time to time, but it was not stable, so I think it just don’t work.
As for the second the solution, could someone link an item?
In fact, I did connect i2s port with my pc, hope my pc will power it, and the other usbc with iphone over the adapter (and since it is white light, I thought there is no problem). But this won’t work.
I connect i2s port with an actual charger, and this time it worked! So I guess it is just pc couldn’t power it over i2s port?
If you’re using a laptop its quite possible. I would guess a desktop PC should have enough juice on the USB hub - but since configurations are often highly variable, it is best to go by trial and error.
Hello. Just got my tone 2, it’s very nice. Looking at the above thread though, I am none the wiser about the status of iOS and the tone 2. I cannot get my iPhone to recognise the tone 2.
My set is:
-allo nirvana 5v switching power supply into the i2s port
-iPhone se version 2, fully updated iOS. Using Apple camera connector to usb c into the tone 2 usb input.
Everything lights up, but iPhone can’t detect the tone 2. Not sure what version of the tone 2 firmware is running, I assume the latest as it shipped from khadas 2 weeks ago.
-The User Manual establishes that the Khadas Tone 2 Pro works with an iPhone if it is used with the Apple C78-USBH Lighting to USB-C cable, but Apple does not have any cables for sale with that model or at less can not be found on the internet, the only original cable from Lightning to USB-C that apple handles, is the following: Cable de USB-C a Lightning (1 m) - Apple (MX)
¿That is the cable you refer to as “Dedicated Lightning Cable that support USB Host” in your comment above? And if it is, ¿Can Khadas guarantee me that with this cable, the Khadas Tone 2 Pro will work with an iPhone XS with iOS 14(properly connected to 5v power supply to the USB-C I2S port)?
I don’t have the original Apple USB-C to Lightning cable in our office; but I can confirm that it does work with a third-party cable. Additional power has to be supplied via the USB-C (I2S) port.