New v1.4 firmware released.
Thank you for the great effort and work.
I’m having a problem with 4K playback in Kodi with Pie firmware (not this firmware specifically, all other Pie firmwares also have this problem) so is there a problem with 4K in Kodi when using Pie with Rockchip? because 4K plays well under Nougat 7.1
I have 4K@60hz working well on Android Pie on RK3399.
But Khadas source code is a bit old especially the kernel, u-boot, hardware/rockchip folders, it needs updating to improve 4K playback.
So I need to test it a bit further to improve it.
When using Kodi also make sure you enable frame-rate switching for smoother playback.
I will try to release a LibreELEC image too for Khadas Edge with 1080p Netflix support, it has very smooth 4K playback.
Last time I tried my image didn’t want to boot but will do more tests.
This version (1.4) is working great my friend and 4K playback is good till now.
Great work and effort.
Keep up the good work.
I do not understand how to install magisk manager.
video or photos to see the manipulation.
on v1.3 it was simple.
why netflix apk does not work then what is in v1.4.
edge v turns back on after 10 minutes, while I was it.
thank you fred21
For Netflix, you can use APKPure Store in the firmware to download it(Netflix with red logo and black background). I didn’t include the Netflix app this time.
The Netflix app included is only to show the banner icon on the homescreen since phone apps only show in the AppDrawer on AndroidTV.
With LibreELEC, you can also play 1080p Netflix and it works well, but I need to find a way to integrate the fan support since software decoding makes the device run a lot hotter. Should be finished in a day or two. I’m also trying to find out from Rockchip if they can make a simple dual-boot so it auto boots LibreELEC so that in LibreELEC you can boot to Android without removing the micro-sd card.
For Magisk Manager it is easy.
You can install the latest Magisk Manager
Copy the boot.img to a USB drive and connect to the Khadas Edge or download it directly with a web browser(Lightning or Chrome) on the Khadas Edge.
Use Magisk Manager to patch this boot.img
Flash the patched_magisk.img either by PC AndroidTool v2.67 which is complicated or the new easy way I added on the Khadas Edge itself.
Go to About - Click 7 times on build info to enable Developer Options
Inside Developer Options - Choose Flash image
Then select the patched_magisk.boot.img - Works well if you use MiXplorer interface
Then select boot partition and OK.
In a few seconds it will be flashed and you can restart your device and will have Magisk root.
there is no need for props anymore et mecool
The prop change is only needed if you are using apps that need a Google Certified device eg. some banking apps or local subscription based streaming apps with strict security requirements that give you are warning message that they can’t run on the device when you open them.
If you just use normal apps or some apps requiring root access then you can just use Magisk normally without the prop change.
Guide for the prop change in Magisk if needed:
I’ll work on a big update this weekend.
There are some things I want to improve.
The Play Store also updates to a new layout which currently doesn’t work with the ir remote or any keyboard, which I found a solution for after lots of testing.
When everything is finished, it will work as a great little media centre.
Good effort my friend.
I’ll be waiting anxiously for your new update as your firmware is the best (in my opinion) till now.
Keep up the good work and thank you for your efforts.
New firmware uploaded v1.5.
Hope everyone enjoys it.
Kodi fractional frame-rates works well now.
Android UI is snappy.
It’s now also possible to use SDDiskTool to make a bootable ‘upgrade’ micro-sd card.
Then you can just insert it and boot with it.
It will then update the firmware and later ask you to remove the micro-sd card.
Please check the guide to set up Kodi for HD Audio or frame-rate switching or how to use the RefreshRate app to switch frame-rate in any app manually.
Magisk manager is showing “Magisk not installed”, how can I install magisk?
It is not showing the option for direct install, only showing “download zip” or “select file and patch”
I managed to install magisk by patching the boot image and flashing it.
However, I liked the interface of v1.4 more than this one.
How can I change the DPI to the one previously used in v1.4?
Is there a way to add 4K resolution to display settings? the maximum now is 1080P
Thank you for the great efforts.
I added a separate boot.img file for people to use with Magisk Manager.
After you patch it, Click 7 times on build Info in the About menu then use Developer Options - Flash Image then boot and choose your patched_boot.img and restart.
Here are some pictures
To change the DPI
Go to TvSettings - Device - More Settings to open the white Settings app.
Under Display Options there should be a menu to change the Size with a slider from left to right.
320DPI is required by a lot of Google AndroidTV apps and works better for compatibility.
I will test on a 4K tv, seems there is still some 1080p default boot setting enabled I added when I was still testing the firmware. Will reupload later.
Please check if 4K is working now
Unfortunately, no it’s not working.
Still the max is 1080P
Are you using a 4K tv with HDMI output or edp or other screen?
Can you try to delete /system/usr/resolution_white.xml and restart?
WIll reflash and test on my 4K tv later today.
Yes, I’m using 4K TV with HDMI but no 4K resolution in display settings.
I’ll try your advice later and give you feedback.
I deleted resolution_white.xml and rebooted but still no 4K in display resolution
I went back to v1.4.
for me much better.
without magisk, more fluid responds better to the khadas remote control and the rii8.
Hello, i have Iffalcon K2a 55 inch android tv. Can i install this firmware. Can you help me how to create boot image in pen drive