Hi all, I have recently discovered the wonders of KRescue and after setting it up on a SD card and putting it in my VIM3, I expected to need to enter MaskROM mode to boot from the SD card. But instead it just always boots from the SD card when there it is inserted and not from the eMMC.
Do you guys know how to boot from the eMMC by default even when a SD card is present?
hmm sorry, but in Krescue if i press cancel, why wouldnt it boot to EMMC and the neter to ubuntu in my case? because i realy hate that i have to remove my SD everytime i boot my khadas. is there a way to implement that.
you are doing something wrong, first you must install the firmware you selected, after it is complete you must exit krescue, then remove sd, turn on Khadas, enjoy!
Hello, Is it because removing and inserting the card can be difficult because of HDMI cable?
If you seek a more convenient solution, see here. I incorporated a couple on the VIM.
I don’t understand what kind of problem you have. I just inserted sd(krescue), flashed Khadas , turned off Khadas, extracted sd(krescue)!
Well, so as not to lose …
get a knife and remove some part of plastic (which block sd card) from HDMI cable…
our scb very compact !!! and i make same for some usb cable and hdmi - sometimes