Pictures processing upload is unnerving
Uploading: IMG_20220513_110547.jpg…
Uploading: IMG_20220513_110600.jpg…
Uploading: IMG_20220513_110645.jpg…
Nothing happens
Make sure the USB adapter slide switch (one closest to the header pins) is toward the outer edge of the board. In the photo it is not very well defined and appears to be moved toward the center of the board. Its hard see in the photo.
Host configuration looks okay since it had recognized the SL device.
Also, USB device must be connected to host and board BEFORE the board is powered on.
It should start sending data to the host upon power on of the SBC.
[i] INITRD INIT :: UPTIME: 1.74 8.59 Linux (none) 5.14.0-rc5 #1 SMP PREEMPT Wed Dec 15 10:08:36 CST 2021 aarch64 GNU/Linux
[i] init display
failed to find a module named meson_ee_pwrc
failed to find a module named meson_dw_hdmi
#MANUAL
link/ether 02:00:00:13:0f:01 brd ff:ff:ff:ff:ff:ff
BusyBox v1.30.1 () built-in shell (ash)
Krescue
__ _____ Khadas ## hyphop ##
/ //_/ _ \___ ___ ______ _____
/ ,< / , / -|-</ __/ // / -)
//|//||_//_/_,/__/
extreme tiny and fast rescue system
BUILD: 220110_266 from: Mon Jan 10 06:40:10 2022
[i] POST_CONFIG: kresq_type=sd + booted= + || start: /dev/mmcblk0
[i] Device: VIM3 Amlogic:G12B ver:0x0002 6 cores 4G ram 29.1 G eMMC
[w] root password undefined
[i] just type > krescue < to start gui
root@Krescue:/# [i] INITRD INIT :: UPTIME: 1.74 8.59 Linux (none) 5.14.0-rc5 #1
SMP PREEMPT Wed Dec 15 10:08:36 CST 2021 aarch64 GNU/Linux
/bin/sh: syntax error: unexpected “(”
root@Krescue:/# [i] init display
/bin/sh: [i]: not found
root@Krescue:/# failed to find a module named meson_ee_pwrc
/bin/sh: failed: not found
root@Krescue:/# failed to find a module named meson_dw_hdmi
/bin/sh: failed: not found
root@Krescue:/# #MANUAL
root@Krescue:/# link/ether 02:00:00:13:0f:01 brd ff:ff:ff:ff:ff:ff
/bin/sh: link/ether: not found
root@Krescue:/#
root@Krescue:/#
root@Krescue:/# BusyBox v1.30.1 () built-in shell (ash)
/bin/sh: syntax error: unexpected “(”
root@Krescue:/#
root@Krescue:/# # Krescue
root@Krescue:/# __ _____ Khadas ## hyphop ##
/bin/sh: : not found
root@Krescue:/# / //_/ _ _ ___ ______ _____
/bin/sh: /: Permission denied
root@Krescue:/# / ,< / , / -|-</ __/ // / -)
/bin/sh: syntax error: unexpected “)”
root@Krescue:/# //|//||_//_/_,/_/
/bin/sh: //: not found
/bin/sh: //: not found
/bin/sh: : not found
/bin/sh: ///,//: not found
root@Krescue:/#
root@Krescue:/# extreme tiny and fast rescue system
/bin/sh: extreme: not found
root@Krescue:/#
root@Krescue:/# BUILD: 220110_266 from: Mon Jan 10 06:40:10 2022
/bin/sh: BUILD:: not found
root@Krescue:/#
root@Krescue:/# [i] POST_CONFIG: kresq_type=sd + booted= + || start: /dev/mmcblk
0
/bin/sh: [i]: not found
/bin/sh: start:: not found
root@Krescue:/# [i] Device: VIM3 Amlogic:G12B ver:0x0002 6 cores 4G ram 29.1 G e
MMC
/bin/sh: [i]: not found
root@Krescue:/# [w] root password undefined
/bin/sh: [w]: not found
root@Krescue:/# [i] just type > krescue < to start gui
/bin/sh: can’t open to: no such file
/bin/sh: [i]: not found
root@Krescue:/# root@Krescue:/#
Boot with krescue from SD, select the wizard mode, install kernel 4.9 ubuntu 20.04 desktop version. I know for fact that image is working fine.
Not sure how you got a new board with that installed, they come with android from the factory.
I know it. I installed twice android and last Linux but the problem is hdmi no signal. I tried with Android from the factory but hdmi didn’t work. I tried to install krescue and CoreElec on SD but hdmi didn’t work and I can’t use wizard mode if I don’t see anythingi
Read please again my other topic:
Yes, you can.
I do it all the time, use the usb adapter on the linux debug port. Make sure you have your ethernet cable connected when you start krescue from SD card so you can use the wizard to install the image from dl.khadas. When the prompt comes up type krescue and you will get another screen. Top option is wizard, you can install android if you prefer that one.
[ 9.731777@3]
[ 9.734064@3] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#2] format 0x00000000 is not supported, setting default format 0x34424752.
[ 9.746250@3]
[ 9.750538@3] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#0] format 0x00000000 is not supported, setting default format 0x34424752.
[ 9.760725@0]
[ 9.766808@0] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#2] format 0x00000000 is not supported, setting default format 0x34424752.
[ 9.775330@0]
[ 10.612602@3] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3443_2)
[ 10.613139@3] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3443_2)
[ 10.625327@3] fb: free_scale_switch to fb0, mode: 0x10001
[ 10.625377@3] fb: set logo loaded
[ 10.890111@4] capability: warning: `main’ uses 32-bit capabilities (legacy support in use)
[ 11.759090@3] early_suspend_state=0
[ 12.303833@2] vout: aml_tvout_mode_work: monitor_timeout
[ 12.324756@1] healthd: battery none chg=
[ 12.331326@0] healthd: battery none chg=
[ 12.331864@0] healthd: battery none chg=
[ 12.792117@3] acc_open
[ 12.792145@3] acc_release
[ 13.164178@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 13.166656@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.247540@5] sdcardfs version 2.0
[ 13.247568@5] sdcardfs: dev_name → /data/media
[ 13.250376@5] sdcardfs: options → fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 13.260606@5] sdcardfs: mnt → eaa43610
[ 13.264419@5] sdcardfs: mounted on top of /data/media type ext4
[ 13.270889@5] Remount options were mask=23,gid=9997 for vfsmnt eaa43a10.
[ 13.277334@5] sdcardfs : options - debug:1
[ 13.280946@5] sdcardfs : options - gid:9997
[ 13.285158@5] sdcardfs : options - mask:23
[ 13.289603@5] Remount options were mask=7,gid=9997 for vfsmnt eb88b210.
[ 13.296496@5] sdcardfs : options - debug:1
[ 13.300019@5] sdcardfs : options - gid:9997
[ 13.304121@5] sdcardfs : options - mask:7
[ 13.666460@0] aml_wifi wifi: [usb_power_control] Set WiFi power down
[ 13.668010@1] meson-mmc: [sdio_notify] finish
[ 13.828744@2] audio_dsp: dts_dec_control/0x0
[ 13.857027@2] BT_RADIO going: on
[ 13.857051@2] AML_BT: going ON
[ 13.873028@4] aml_wifi wifi: [usb_power_control] Set WiFi power on !
[ 13.950123@3] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 13.955063@5] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 13.984850@3] sensors 4-000e: set sensor poll time to 66ms
[ 13.986115@2] sensors 4-000e: sensor on: starting poll sensor data 64ms
[ 14.079867@4] meson-mmc: [sdio_notify] finish
[ 14.081141@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 14.085178@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[ 14.092879@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 14.098174@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[ 14.111290@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 14.112269@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[ 14.143886@4] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 14.144005@4] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 14.170599@4] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 14.173506@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 14.179866@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 14.188214@4] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 14.195658@4] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[ 14.272011@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 14.274468@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
[ 14.282701@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 14.295439@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[ 14.303995@4] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 14.309576@4] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 14.315519@4] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
[ 14.322038@4] meson-mmc: Data 1 aligned delay is 0
[ 14.326816@4] meson-mmc: sdio: clk 199999997 tuning start
[ 14.341372@4] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 14.341402@4] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 14.364466@4] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 14.364500@4] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[ 14.390607@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 14.390647@4] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[ 14.407715@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 14.407746@4] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[ 14.422860@4] meson-mmc: sdio: adj_win: < 0 2 3 4 >
[ 14.422890@4] meson-mmc: left:3, right:0, mid:4, size:4
[ 14.427338@4] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 14.432514@4] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 14.440926@4] meson-mmc: delay1:0x0, delay2:0x0
[ 14.458457@4] sdio: new ultra high speed SDR104 SDIO card at address 0001
[ 14.459606@4] sdio: clock 199999997, 4-bit-bus-width
[ 14.465322@1] meson-mmc: [sdio_reinit] finish
[ 14.469122@1] aml_wifi wifi: [usb_power_control] Set WiFi power on !
[ 14.475451@4] aml_wifi wifi: [pci_reinit] pci wifi reinit!
[ 14.480967@4] aml_wifi wifi: [wifi_power_ioctl] Set sdio wifi power up!
[ 14.487498@4] aml_wifi wifi: [wifi_power_ioctl] wifi interface dev type: sdio, length = 4
[ 14.525480@2] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
[ 14.529407@2] [dhd] ======== dhd_wlan_init_plat_data ========
[ 14.534932@2] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=86, oob_irq_flags=0x418
[ 14.542969@2] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 14.548192@2] [dhd] dhd_wifi_platform_load: Enter
[ 14.552569@2] [dhd] Power-up adapter ‘DHD generic adapter’
[ 14.558277@2] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 14.564053@2] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 14.570189@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
[ 14.759453@4] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200
[ 14.776532@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
[ 14.967173@4] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[ 15.283855@3] [dhd] wifi_platform_bus_enumerate device present 1
[ 15.284248@3] [dhd] ======== Card detection to detect SDIO card! ========
[ 15.291075@3] sdio_reset_comm():
[ 15.294417@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 15.299951@3] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 15.331920@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 15.332050@1] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 15.357606@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 15.360654@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 15.366149@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 15.374412@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 15.381454@2] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[ 15.481094@1] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 15.485219@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 15.491354@1] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
[ 15.497841@5] meson-mmc: Data 1 aligned delay is 0
[ 15.502781@5] meson-mmc: sdio: clk 199999997 tuning start
[ 15.519967@5] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 15.520019@5] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 15.534469@3] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 15.534506@3] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[ 15.550731@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 15.550799@5] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[ 15.565168@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 15.565202@0] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[ 15.578819@0] meson-mmc: sdio: adj_win: < 0 2 3 4 >
[ 15.578854@0] meson-mmc: left:3, right:0, mid:4, size:4
[ 15.583419@4] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 15.588592@4] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 15.596934@4] meson-mmc: delay1:0x0, delay2:0x0
[ 15.601422@4] meson-mmc: [sdio_reinit] finish
[ 15.623716@4] [dhd] bcmsdh_register: register client driver
[ 15.623977@0] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[ 15.629685@2] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[ 15.633587@2] [dhd] bus num (host idx)=2, slot num (rca)=1
[ 15.638981@2] [dhd] found adapter info ‘DHD generic adapter’
[ 15.644729@2] Wifi: bcmdhd_mem_prealloc: sectoin 3, size 139264
[ 15.650768@2] succeed to alloc static buf
[ 15.654645@2] Wifi: bcmdhd_mem_prealloc: sectoin 4, size 0
[ 15.660355@2] [dhd] sdioh_attach: set sd_f2_blocksize 256
[ 15.665586@0] [dhd] sdioh_attach: sd clock rate = 0
[ 15.670854@3] [dhd] dhdsdio_probe : no mutex held. set lock
[ 15.675945@0] [dhd] F1 signature read @0x18000000=0x17294359
[ 15.687881@0] [dhd] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[ 15.690881@0] [dhd] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[ 15.697171@5] Wifi: bcmdhd_mem_prealloc: sectoin 7, size 25064
[ 15.702962@5] [dhd] dhd_conf_set_chiprev : chip=0x4359, chiprev=9
[ 15.709086@5] Wifi: bcmdhd_mem_prealloc: sectoin 0, size 10320
[ 15.716075@5] Wifi: bcmdhd_mem_prealloc: sectoin 5, size 65536
[ 15.722379@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.728932@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.737255@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.746193@3] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.754127@3] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.762478@3] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.770914@3] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.779304@3] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.787722@3] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 15.796728@4] Wifi: bcmdhd_mem_prealloc: sectoin 19, size 65652
[ 15.802041@4] Wifi: bcmdhd_mem_prealloc: sectoin 20, size 262144
[ 15.808270@4] Wifi: bcmdhd_mem_prealloc: sectoin 22, size 65536
[ 15.813874@4] [dhd] dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB
[ 15.825558@4] [dhd] dhd_log_dump_init : Try to allocate memory total(4194304) special(8192)
[ 15.833904@4] Wifi: bcmdhd_mem_prealloc: sectoin 15, size 4194304
[ 15.840425@4] Wifi: bcmdhd_mem_prealloc: sectoin 16, size 8192
[ 15.845929@1] dhd_attach(): thread:dhd_watchdog_thread:105c started
[ 15.852167@4] dhd_attach(): thread:dhd_dpc:105d started
[ 15.858077@0] dhd_attach(): thread:dhd_rxf:105e started
[ 15.862556@0] [dhd] dhd_deferred_work_init: work queue initialized
[ 15.868842@3] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 → mode 2
[ 15.875844@3] [dhd] get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn’t exist
[ 15.884848@3] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 15.890603@3] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[ 15.931235@2] Wifi: bcmdhd_mem_prealloc: sectoin 1, size 10300
[ 15.931435@2] Wifi: bcmdhd_mem_prealloc: sectoin 2, size 65536
[ 15.937482@0] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 15.943140@0] [dhd] Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
[ 15.952515@5] [dhd] Register interface [wlan0] MAC: 18:93:7f:67:dd:f2
[ 15.952515@5]
[ 15.959305@1] [dhd] dhd_dbg_detach_pkt_monitor, 2099
[ 15.963515@5] [dhd] dhd_bus_devreset: == Power OFF ==
[ 15.969173@5] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
[ 15.974111@0] [dhd] bcmsdh_oob_intr_unregister: Enter
[ 15.978571@0] [dhd] bcmsdh_oob_intr_unregister: irq is not registered
[ 15.985015@3] [dhd] dhd_bus_devreset: making dhdpub up FALSE
[ 15.990663@3] [dhd] dhd_txglom_enable: enable 0
[ 15.995212@3] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 16.000502@3] [dhd] dhd_bus_devreset: WLAN OFF DONE
[ 16.005564@0] [dhd] wifi_platform_set_power = 0, delay: 0 msec
[ 16.011253@4] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[ 16.017142@4] [dhd] dhd_ifname: ifidx 16 out of range
[ 16.021946@4] [dhd] <if_bad>: set cur_etheraddr failed
[ 16.027071@4] [dhd] dhd_ifname: ifidx 16 out of range
[ 16.032077@4] [dhd] dhd_register_if: _dhd_set_mac_address() failed
[ 16.039499@2] [dhd] Register interface [wlan1] MAC: 1a:93:7f:67:dd:f2
[ 16.039499@2]
[ 16.046441@2] [dhd] dhdsdio_probe : the lock is released.
[ 16.051995@2] [dhd] dhd_module_init: Exit err=0
[ 16.137752@4] [dhd] dhd_open: Enter wlan0
[ 16.137779@4] [dhd] dhd_open : no mutex held. set lock
[ 16.141308@4] [dhd]
[ 16.141308@4] Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
[ 16.150597@4] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
[ 16.156189@4] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 16.162156@4] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 16.167977@4] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
[ 16.374831@4] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
[ 16.883861@0] sdio_reset_comm():
[ 16.883973@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 16.887502@2] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 16.919863@4] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 16.919991@4] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 17.087678@0] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 17.091912@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 17.097933@0] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
[ 17.104765@0] meson-mmc: Data 1 aligned delay is 0
[ 17.109659@0] meson-mmc: sdio: clk 199999997 tuning start
[ 17.122556@3] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 17.122596@3] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 17.137197@1] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 17.137233@1] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[ 17.154094@3] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 17.154135@3] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[ 17.171044@1] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 17.171081@1] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[ 17.185103@0] meson-mmc: sdio: adj_win: < 0 2 3 4 >
[ 17.185139@0] meson-mmc: left:3, right:0, mid:4, size:4
[ 17.190023@2] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 17.195413@2] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 17.204182@2] meson-mmc: delay1:0x0, delay2:0x0
[ 17.208245@0] [dhd] sdioh_start: set sd_f2_blocksize 256
[ 17.213783@0] [dhd]
[ 17.213783@0]
[ 17.213783@0] dhd_bus_devreset: == Power ON ==
[ 17.221474@0] [dhd] F1 signature read @0x18000000=0x17294359
[ 17.235750@3] [dhd] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[ 17.238453@0] [dhd] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[ 17.244963@0] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 17.250667@2] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 17.257093@0] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/wifi/4359/config.txt
[ 17.264449@4] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin
[ 17.273659@4] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/wifi/4359/nvram_ap6398s.txt
[ 17.282721@4] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/wifi/4359/clm_bcm4359c0_ag.blob
[ 17.292254@4] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/wifi/4359/config.txt
[ 17.302792@0] [dhd] dhd_os_open_image1: /vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin (637347 bytes) open success
[ 17.436147@5] [dhd] dhd_os_open_image1: /vendor/etc/wifi/4359/nvram_ap6398s.txt (5861 bytes) open success
[ 17.440850@3] [dhd] NVRAM version: AP6398S_NVRAM_V1.1_20170926
[ 17.447126@0] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 17.633860@1] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 17.635141@1] [dhd] bcmsdh_oob_intr_register: HW_OOB irq=86 flags=0x8
[ 17.641443@3] [dhd] get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn’t exist
[ 17.650871@3] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 17.656441@3] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 → mode 1
[ 17.664071@2] [dhd] dhd_apply_default_clm: Ignore clm file /vendor/etc/wifi/4359/clm_bcm4359c0_ag.blob
[ 17.674256@5] [dhd] Firmware up: op_mode=0x0405, MAC=18:93:7f:67:dd:f2
[ 17.683539@3] [dhd] dhd_preinit_ioctls: event_log_max_sets: 26 ret: -23
[ 17.693876@4] [dhd] Driver: 100.10.545.11 (r826445-20200610-1)
[ 17.693876@4] Firmware: wl0: Sep 20 2019 20:22:36 version 9.87.51.11.34 (edb7293@shgit) (r711217) FWID 01-c7feb1ee
[ 17.693876@4] CLM: 9.7.5 (2019-09-20 20:20:47)
[ 17.714964@0] [dhd] dhd_preinit_ioctls wlc_ver failed -23
[ 17.715320@0] [dhd] dhd_txglom_enable: enable 1
[ 17.719382@3] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
[ 17.725431@3] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
[ 17.733062@3] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
[ 17.740368@3] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
[ 17.748235@3] [dhd] dhd_conf_get_disable_proptx : fw_proptx=0, disable_proptx=1
[ 17.756803@0] [dhd] dhd_pno_init: Support Android Location Service
[ 17.788110@3] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[ 17.791246@3] [dhd] dhd_rtt_init : FTM is not supported
[ 17.796924@3] [dhd] dhd_rtt_ftm_config : failed to set config
[ 17.803424@0] [dhd] failed to set WNM capabilities
[ 17.818662@4] [dhd] dhd_preinit_ioctls: Failed to get preserve log # !
[ 17.819844@4] [dhd] dhd_conf_map_country_list : CN/38
[ 17.824606@4] [dhd] dhd_conf_set_country : set country CN, revision 38
[ 17.833435@4] [dhd] dhd_conf_set_country : Country code: CN (CN/38)
[ 17.846317@2] [dhd] CONFIG-ERROR) dhd_conf_set_intiovar : txbf setting failed -23
[ 17.848374@2] [dhd-wlan0] wl_android_wifi_on : Success
[ 17.896775@4] [dhd] dhd_open : the lock is released.
[ 17.896803@4] [dhd] dhd_open: Exit wlan0 ret=0
[ 17.900569@4] [dhd] [wlan0] tx queue started
[ 17.968870@0] [dhd] P2P interface registered
[ 17.968905@0] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: ea994800, wdev->net: (null)
[ 17.985521@1] [dhd] WLC_E_IF: NO_IF set, event Ignored
[ 18.054015@2] type=1400 audit(1293883209.704:42): avc: denied { getattr } for pid=3692 comm=“android.ui” path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev=“sysfs” ino=10330 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[ 18.054104@4] [dhd] Random MAC OUI to be used - da:1:19
[ 18.064437@3] [dhd] dhd_dbg_attach_pkt_monitor, 1501
[ 18.065989@3] [dhd] net_os_enable_packet_filter: val = 0
[ 18.066615@3] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 2
[ 18.073509@4] [dhd] net_os_enable_packet_filter: val = 1
[ 18.073990@4] [dhd] net_os_enable_packet_filter: val = 0
[ 18.074404@4] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 3
[ 18.075699@4] [dhd] net_os_enable_packet_filter: val = 1
[ 18.076756@5] [dhd] dhd_set_suspend: Remove extra suspend setting
[ 18.077163@5] [dhd] dhd_enable_packet_filter: enter, value = 0
[ 18.129357@2] type=1400 audit(1293883215.260:43): avc: denied { getattr } for pid=3456 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=261136 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 18.256027@1] selinux: avc: denied { set } for property=dhclient.ipaddress.wlan0 pid=3692 uid=1000 gid=1000 scontext=u:r:system_server:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
[ 18.256027@1]
[ 21.700235@5] zram0: detected capacity change from 0 to 268435456
[ 21.716470@4] type=1400 audit(1293883215.260:43): avc: denied { getattr } for pid=3456 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=261136 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 21.724292@3] mkswap: Swapspace size: 262140k, UUID=d6e15072-27d7-49c8-8bd6-2adb9d70e434
[ 21.735043@3] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
[ 21.736842@3] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)
[ 21.736842@3]
[ 21.757677@2] audit: audit_lost=18 audit_rate_limit=5 audit_backlog_limit=64
[ 21.757680@2] audit: rate limit exceeded
[ 21.771134@4] type=1400 audit(1293883218.924:44): avc: denied { getattr } for pid=4235 comm=“preinstall.sh” path="/data/local/symbol_thirdpart_apks_installed" dev=“mmcblk0p20” ino=1436172 scontext=u:r:preinstall:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[ 21.796027@3] type=1400 audit(1293883218.924:44): avc: denied { getattr } for pid=4235 comm=“preinstall.sh” path="/data/local/symbol_thirdpart_apks_installed" dev=“mmcblk0p20” ino=1436172 scontext=u:r:preinstall:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[ 21.809880@5] reg resource 2, start: ff63c10c,end: ff63c10f
[ 21.809882@5] reg resource 3, start: ff63c110,end: ff63c113
[ 21.809883@5] reg resource 4, start: ffd01088,end: ffd0108b
[ 21.809885@5] reg resource NN_CLK, start: ff63c1c8,end: ff63c1cb
[ 21.809886@5] npu_version: 2
[ 21.809933@5] galcore irq number is 53.
[ 21.809936@5] Galcore version 6.4.4.3.310723
[ 21.824096@0] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)
[ 21.824096@0]
[ 21.862745@3] type=1400 audit(1293883218.928:45): avc: denied { net_raw } for pid=4236 comm=“cmdserver” capability=13 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=capability permissive=1
[ 21.882615@3] type=1400 audit(1293883218.928:45): avc: denied { net_raw } for pid=4236 comm=“cmdserver” capability=13 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=capability permissive=1
[ 21.898464@3] type=1400 audit(1293883218.928:46): avc: denied { setopt } for pid=4236 comm=“cmdserver” scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 21.915148@3] type=1400 audit(1293883218.928:46): avc: denied { setopt } for pid=4236 comm=“cmdserver” scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 23.875291@0] type=1400 audit(1293883218.964:51): avc: denied { open } for pid=4251 comm=“i2cget” path="/dev/i2c-4" dev=“tmpfs” ino=4261 scontext=u:r:cmdserver:s0 tcontext=u:object_r:i2c_device:s0 tclass=chr_file permissive=1
[ 23.890009@0] type=1400 audit(1293883221.080:59): avc: denied { getattr } for pid=3456 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=261136 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 23.915951@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
[ 42.940976@0] type=1400 audit(1293883221.080:59): avc: denied { getattr } for pid=3456 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=261136 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 42.959447@0] type=1400 audit(1293883240.148:60): avc: denied { search } for pid=3446 comm=“memtrack@1.0-se” name=“3432” dev=“proc” ino=3373 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
[ 42.980865@0] type=1400 audit(1293883240.148:60): avc: denied { search } for pid=3446 comm=“memtrack@1.0-se” name=“3432” dev=“proc” ino=3373 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
[ 43.001651@0] type=1400 audit(1293883240.148:61): avc: denied { read } for pid=3446 comm=“memtrack@1.0-se” name=“status” dev=“proc” ino=35536 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 43.022872@3] type=1400 audit(1293883240.148:61): avc: denied { read } for pid=3446 comm=“memtrack@1.0-se” name=“status” dev=“proc” ino=35536 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 43.044085@3] type=1400 audit(1293883240.148:62): avc: denied { open } for pid=3446 comm=“memtrack@1.0-se” path="/proc/3432/status" dev=“proc” ino=35536 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 43.045175@5] audit: audit_lost=25 audit_rate_limit=5 audit_backlog_limit=64
[ 43.045177@5] audit: rate limit exceeded
[ 43.077222@3] type=1400 audit(1293883240.148:62): avc: denied { open } for pid=3446 comm=“memtrack@1.0-se” path="/proc/3432/status" dev=“proc” ino=35536 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 43.099412@3] type=1400 audit(1293883240.148:63): avc: denied { getattr } for pid=3446 comm=“memtrack@1.0-se” path="/proc/3432/status" dev=“proc” ino=35536 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 43.121998@3] type=1400 audit(1293883240.148:63): avc: denied { getattr } for pid=3446 comm=“memtrack@1.0-se” path="/proc/3432/status" dev=“proc” ino=35536 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 43.144573@3] type=1400 audit(1293883240.208:64): avc: denied { search } for pid=3446 comm=“memtrack@1.0-se” name=“3441” dev=“proc” ino=2665 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_gnss_default:s0 tclass=dir permissive=1
[ 54.618404@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
[ 62.640007@0] fb: mem_free_work, free memory: addr:800000
[ 86.199574@1] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 86.205067@3] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 87.827115@5] type=1400 audit(1293883240.252:68): avc: denied { search } for pid=3446 comm=“memtrack@1.0-se” name=“3450” dev=“proc” ino=3532 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_neuralnetworks_default:s0 tclass=dir permissive=1
[ 87.843239@5] type=1400 audit(1293883285.032:88): avc: denied { getattr } for pid=3456 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=261136 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 89.337022@3] type=1400 audit(1293883285.032:88): avc: denied { getattr } for pid=3456 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=261136 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 89.355736@3] type=1400 audit(1293883286.544:89): avc: denied { read write } for pid=5690 comm=4173796E635461736B202331 name=“bootalarm” dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 89.376557@3] type=1400 audit(1293883286.544:89): avc: denied { read write } for pid=5690 comm=4173796E635461736B202331 name=“bootalarm” dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 89.397381@3] type=1400 audit(1293883286.544:90): avc: denied { open } for pid=5690 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 89.424783@3] type=1400 audit(1293883286.544:90): avc: denied { open } for pid=5690 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 89.451807@3] type=1400 audit(1293883286.544:91): avc: denied { getattr } for pid=5690 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 90.303162@2] binder_alloc: 4338: binder_alloc_buf size 1056768 failed, no address space
[ 90.305689@2] binder_alloc: allocated: 3580 (num: 8 largest: 1756), free: 1036804 (num: 4 largest: 1034984)
[ 90.315528@2] binder: 4534:5731 transaction failed 29201/-28, size 1056768-0 line 3267
[ 90.982919@3] type=1400 audit(1293883286.544:91): avc: denied { getattr } for pid=5690 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 120.235587@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0
[ 200.236992@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0
[ 323.663867@2] type=1400 audit(1293883288.188:94): avc: denied { getattr } for pid=4730 comm=“Binder:4730_4” path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 323.686165@2] type=1400 audit(1293883520.868:95): avc: denied { call } for pid=4534 comm=“Thread-45” scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:hal_memtrack_default:s0 tclass=binder permissive=1
[ 360.237581@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 4, bssidx: 0
ueue eb5f9000 success, _destroy_encode_work_queue line 3773. <
/system/bin/sh: [: missing ]
[ 9.616125@5] allocating phys 0xcfc00000, virt addr 0x0, size 65536k
[ 9.621413@5] [-] vpu_open, ret: 0
2|console:/ $ [ 9.612500@5] [+] vpu_open
/system/bin/sh: [: missing ]
[ 9.627207@5] vpu_free_buffers
25@5] allocating phys 0xcfc00000, virt addr 0x0, size 65536k <
[ 520.236056@1] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 5, bssidx: 0
[ 680.246557@1] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 6, bssidx: 0
I erased all data from emmc using krescue and I installed android
I removed SD card and after reboot:
server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[ 31.841399@3] type=1400 audit(1293883230.000:48): avc: denied { open } for pid=3729 comm=“android.ui” path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev=“sysfs” ino=10330 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[ 31.865582@3] type=1400 audit(1293883230.000:48): avc: denied { open } for pid=3729 comm=“android.ui” path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev=“sysfs” ino=10330 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[ 31.889700@3] type=1400 audit(1293883230.000:49): avc: denied { getattr } for pid=3729 comm=“android.ui” path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev=“sysfs” ino=10330 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[ 40.680812@4] acc_open
[ 40.680852@4] acc_release
[ 43.167093@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 43.170023@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.256034@0] aml_wifi wifi: [usb_power_control] Set WiFi power down
[ 44.256826@0] meson-mmc: [sdio_notify] finish
[ 44.466275@3] aml_wifi wifi: [usb_power_control] Set WiFi power on !
[ 44.672127@1] meson-mmc: [sdio_notify] finish
[ 44.673874@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 44.677446@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[ 44.684939@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 44.690448@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[ 44.702444@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[ 44.703446@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[ 44.731477@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 44.731613@1] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 44.761526@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 44.764389@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 44.773338@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 44.779090@1] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 44.785345@1] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[ 44.894261@1] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 44.898719@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 44.904602@1] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
[ 44.911149@1] meson-mmc: Data 1 aligned delay is 0
[ 44.916043@1] meson-mmc: sdio: clk 199999997 tuning start
[ 44.933225@1] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 44.933259@1] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 44.948452@1] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 44.948488@1] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[ 44.962932@1] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 44.962965@1] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[ 44.978097@1] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 44.978131@1] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[ 44.992062@1] meson-mmc: sdio: adj_win: < 0 2 3 4 >
[ 44.992097@1] meson-mmc: left:3, right:0, mid:4, size:4
[ 44.996552@1] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 45.001733@1] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 45.010232@1] meson-mmc: delay1:0x0, delay2:0x0
[ 45.022883@1] sdio: new ultra high speed SDR104 SDIO card at address 0001
[ 45.024073@1] sdio: clock 199999997, 4-bit-bus-width
[ 45.030795@2] meson-mmc: [sdio_reinit] finish
[ 45.033664@2] aml_wifi wifi: [usb_power_control] Set WiFi power on !
[ 45.039884@2] aml_wifi wifi: [pci_reinit] pci wifi reinit!
[ 45.045265@2] aml_wifi wifi: [wifi_power_ioctl] Set sdio wifi power up!
[ 45.051970@2] aml_wifi wifi: [wifi_power_ioctl] wifi interface dev type: sdio, length = 4
[ 45.824359@1] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
[ 45.828184@1] [dhd] ======== dhd_wlan_init_plat_data ========
[ 45.834088@3] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=86, oob_irq_flags=0x418
[ 45.841943@3] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 45.847265@3] [dhd] dhd_wifi_platform_load: Enter
[ 45.851545@3] [dhd] Power-up adapter ‘DHD generic adapter’
[ 45.857115@3] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 45.862929@3] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 45.869252@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
[ 46.076343@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
[ 46.405396@2] sdcardfs version 2.0
[ 46.405419@2] sdcardfs: dev_name → /data/media
[ 46.407772@2] sdcardfs: options → fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 46.418320@2] sdcardfs: mnt → e7da0410
[ 46.422166@2] sdcardfs: mounted on top of /data/media type ext4
[ 46.428558@2] Remount options were mask=23,gid=9997 for vfsmnt e7da0710.
[ 46.434667@2] sdcardfs : options - debug:1
[ 46.438732@2] sdcardfs : options - gid:9997
[ 46.442882@2] sdcardfs : options - mask:23
[ 46.447336@2] Remount options were mask=7,gid=9997 for vfsmnt eb5b9710.
[ 46.453600@2] sdcardfs : options - debug:1
[ 46.457596@2] sdcardfs : options - gid:9997
[ 46.461752@2] sdcardfs : options - mask:7
[ 46.587714@5] [dhd] wifi_platform_bus_enumerate device present 1
[ 46.588144@5] [dhd] ======== Card detection to detect SDIO card! ========
[ 46.595234@5] sdio_reset_comm():
[ 46.598142@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 46.603835@5] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 46.635474@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 46.635591@2] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 46.661907@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 46.664777@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 46.671063@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 46.678621@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 46.685721@0] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[ 46.797900@1] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 46.802088@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 46.808719@3] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
[ 46.815302@3] meson-mmc: Data 1 aligned delay is 0
[ 46.819460@3] meson-mmc: sdio: clk 199999997 tuning start
[ 46.833872@4] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 46.833900@4] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 46.847353@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 46.847403@4] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[ 46.860976@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 46.861012@0] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[ 46.878266@3] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 46.878298@3] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[ 46.892206@0] meson-mmc: sdio: adj_win: < 0 2 3 4 >
[ 46.892243@0] meson-mmc: left:3, right:0, mid:4, size:4
[ 46.896740@5] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 46.901931@5] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 46.910333@5] meson-mmc: delay1:0x0, delay2:0x0
[ 46.915170@5] meson-mmc: [sdio_reinit] finish
[ 46.935855@2] [dhd] bcmsdh_register: register client driver
[ 46.936012@2] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[ 46.940771@2] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[ 46.946838@2] [dhd] bus num (host idx)=2, slot num (rca)=1
[ 46.951066@2] [dhd] found adapter info ‘DHD generic adapter’
[ 46.956687@2] Wifi: bcmdhd_mem_prealloc: sectoin 3, size 139264
[ 46.962663@2] succeed to alloc static buf
[ 46.966557@2] Wifi: bcmdhd_mem_prealloc: sectoin 4, size 0
[ 46.972080@5] [dhd] sdioh_attach: set sd_f2_blocksize 256
[ 46.977625@0] [dhd] sdioh_attach: sd clock rate = 0
[ 46.982765@2] [dhd] dhdsdio_probe : no mutex held. set lock
[ 46.988529@1] [dhd] F1 signature read @0x18000000=0x17294359
[ 47.000387@0] [dhd] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[ 47.002850@2] [dhd] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[ 47.009864@1] Wifi: bcmdhd_mem_prealloc: sectoin 7, size 25064
[ 47.015725@5] [dhd] dhd_conf_set_chiprev : chip=0x4359, chiprev=9
[ 47.021442@5] Wifi: bcmdhd_mem_prealloc: sectoin 0, size 10320
[ 47.028158@5] Wifi: bcmdhd_mem_prealloc: sectoin 5, size 65536
[ 47.034198@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.041354@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.049854@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.058188@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.066628@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.074994@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.083386@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.091802@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.100203@2] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[ 47.109488@1] Wifi: bcmdhd_mem_prealloc: sectoin 19, size 65652
[ 47.114548@2] Wifi: bcmdhd_mem_prealloc: sectoin 20, size 262144
[ 47.120520@2] Wifi: bcmdhd_mem_prealloc: sectoin 22, size 65536
[ 47.126406@2] [dhd] dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB
[ 47.138090@2] [dhd] dhd_log_dump_init : Try to allocate memory total(4194304) special(8192)
[ 47.146415@2] Wifi: bcmdhd_mem_prealloc: sectoin 15, size 4194304
[ 47.152975@2] Wifi: bcmdhd_mem_prealloc: sectoin 16, size 8192
[ 47.158338@4] dhd_attach(): thread:dhd_watchdog_thread:fc5 started
[ 47.164506@3] dhd_attach(): thread:dhd_dpc:fc6 started
[ 47.170277@0] dhd_attach(): thread:dhd_rxf:fc7 started
[ 47.174835@2] [dhd] dhd_deferred_work_init: work queue initialized
[ 47.180889@2] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 → mode 2
[ 47.188136@2] [dhd] get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn’t exist
[ 47.197107@2] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 47.202832@2] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[ 47.235922@0] Wifi: bcmdhd_mem_prealloc: sectoin 1, size 10300
[ 47.236163@0] Wifi: bcmdhd_mem_prealloc: sectoin 2, size 65536
[ 47.242133@0] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 47.249400@1] [dhd] Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
[ 47.257947@3] [dhd] Register interface [wlan0] MAC: 18:93:7f:67:dd:f2
[ 47.257947@3]
[ 47.263349@0] [dhd] dhd_dbg_detach_pkt_monitor, 2099
[ 47.268506@5] [dhd] dhd_bus_devreset: == Power OFF ==
[ 47.274295@0] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
[ 47.278363@0] [dhd] bcmsdh_oob_intr_unregister: Enter
[ 47.283287@4] [dhd] bcmsdh_oob_intr_unregister: irq is not registered
[ 47.291127@4] [dhd] dhd_bus_devreset: making dhdpub up FALSE
[ 47.295284@4] [dhd] dhd_txglom_enable: enable 0
[ 47.299752@4] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 47.305228@4] [dhd] dhd_bus_devreset: WLAN OFF DONE
[ 47.310433@1] [dhd] wifi_platform_set_power = 0, delay: 0 msec
[ 47.315893@2] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[ 47.321607@2] [dhd] dhd_ifname: ifidx 16 out of range
[ 47.326609@2] [dhd] <if_bad>: set cur_etheraddr failed
[ 47.331775@2] [dhd] dhd_ifname: ifidx 16 out of range
[ 47.336790@2] [dhd] dhd_register_if: _dhd_set_mac_address() failed
[ 47.343514@2] [dhd] Register interface [wlan1] MAC: 1a:93:7f:67:dd:f2
[ 47.343514@2]
[ 47.351114@2] [dhd] dhdsdio_probe : the lock is released.
[ 47.356615@2] [dhd] dhd_module_init: Exit err=0
[ 48.938438@2] audio_dsp: dts_dec_control/0x0
[ 50.321926@3] sensors 4-000e: set sensor poll time to 66ms
[ 50.323085@2] sensors 4-000e: sensor on: starting poll sensor data 64ms
[ 50.468148@2] [dhd] dhd_open: Enter wlan0
[ 50.468175@2] [dhd] dhd_open : no mutex held. set lock
[ 50.471734@2] [dhd]
[ 50.471734@2] Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
[ 50.481110@2] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
[ 50.486651@2] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[ 50.492610@2] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 50.498380@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
[ 50.706157@1] BT_RADIO going: on
[ 50.706186@1] AML_BT: going ON
[ 50.707708@5] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
[ 51.119953@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 51.122411@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
[ 51.130727@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 51.143809@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[ 51.223544@5] sdio_reset_comm():
[ 51.223616@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 51.227007@5] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 51.242825@5] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 51.246792@5] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 51.259472@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 51.261399@2] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
[ 51.288350@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 51.291463@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 51.297427@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 51.305331@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 51.313041@5] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[ 51.431608@3] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 51.436347@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 51.442206@3] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
[ 51.448756@3] meson-mmc: Data 1 aligned delay is 0
[ 51.453462@3] meson-mmc: sdio: clk 199999997 tuning start
[ 51.467218@4] meson-mmc: sdio: adj_win: < 1 2 3 4 >
[ 51.467249@4] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 51.486139@1] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 51.486179@1] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[ 51.504745@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 51.504776@4] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[ 51.521367@5] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
[ 51.521400@5] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[ 51.537412@3] meson-mmc: sdio: adj_win: < 0 2 3 4 >
[ 51.537519@3] meson-mmc: left:3, right:0, mid:4, size:4
[ 51.541933@3] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 51.547415@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 51.556083@3] meson-mmc: delay1:0x0, delay2:0x0
[ 51.560885@5] [dhd] sdioh_start: set sd_f2_blocksize 256
[ 51.565945@2] [dhd]
[ 51.565945@2]
[ 51.565945@2] dhd_bus_devreset: == Power ON ==
[ 51.574129@4] [dhd] F1 signature read @0x18000000=0x17294359
[ 51.585997@5] [dhd] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[ 51.589466@4] [dhd] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[ 51.595179@4] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[ 51.600567@3] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[ 51.609475@3] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/wifi/4359/config.txt
[ 51.614644@3] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin
[ 51.623833@3] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/wifi/4359/nvram_ap6398s.txt
[ 51.633062@3] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/wifi/4359/clm_bcm4359c0_ag.blob
[ 51.638570@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200
[ 51.651324@3] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/wifi/4359/config.txt
[ 51.662493@2] [dhd] dhd_os_open_image1: /vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin (637347 bytes) open success
[ 51.766843@3] [dhd] dhd_os_open_image1: /vendor/etc/wifi/4359/nvram_ap6398s.txt (5861 bytes) open success
[ 51.772323@5] [dhd] NVRAM version: AP6398S_NVRAM_V1.1_20170926
[ 51.777663@4] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 51.844087@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[ 51.961089@0] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 51.965098@1] [dhd] bcmsdh_oob_intr_register: HW_OOB irq=86 flags=0x8
[ 51.971570@1] [dhd] get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn’t exist
[ 51.977594@5] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[ 51.984065@1] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 → mode 1
[ 51.992132@0] [dhd] dhd_apply_default_clm: Ignore clm file /vendor/etc/wifi/4359/clm_bcm4359c0_ag.blob
[ 52.001516@5] [dhd] Firmware up: op_mode=0x0405, MAC=18:93:7f:67:dd:f2
[ 52.012735@2] [dhd] dhd_preinit_ioctls: event_log_max_sets: 26 ret: -23
[ 52.022607@0] [dhd] Driver: 100.10.545.11 (r826445-20200610-1)
[ 52.022607@0] Firmware: wl0: Sep 20 2019 20:22:36 version 9.87.51.11.34 (edb7293@shgit) (r711217) FWID 01-c7feb1ee
[ 52.022607@0] CLM: 9.7.5 (2019-09-20 20:20:47)
[ 52.039176@4] [dhd] dhd_preinit_ioctls wlc_ver failed -23
[ 52.045807@0] [dhd] dhd_txglom_enable: enable 1
[ 52.048180@2] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
[ 52.054431@2] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
[ 52.061753@2] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
[ 52.069233@2] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
[ 52.076796@2] [dhd] dhd_conf_get_disable_proptx : fw_proptx=0, disable_proptx=1
[ 52.085660@4] [dhd] dhd_pno_init: Support Android Location Service
[ 52.116577@3] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[ 52.119862@3] [dhd] dhd_rtt_init : FTM is not supported
[ 52.125584@1] [dhd] dhd_rtt_ftm_config : failed to set config
[ 52.133655@1] [dhd] failed to set WNM capabilities
[ 52.151348@3] [dhd] dhd_preinit_ioctls: Failed to get preserve log # !
[ 52.152503@3] [dhd] dhd_conf_map_country_list : CN/38
[ 52.157328@3] [dhd] dhd_conf_set_country : set country CN, revision 38
[ 52.167279@3] [dhd] dhd_conf_set_country : Country code: CN (CN/38)
[ 52.178344@5] [dhd] CONFIG-ERROR) dhd_conf_set_intiovar : txbf setting failed -23
[ 52.180354@5] [dhd-wlan0] wl_android_wifi_on : Success
[ 52.236580@3] [dhd] dhd_open : the lock is released.
[ 52.236611@3] [dhd] dhd_open: Exit wlan0 ret=0
[ 52.240585@3] [dhd] [wlan0] tx queue started
[ 52.315628@0] [dhd] P2P interface registered
[ 52.315665@0] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: e36ee400, wdev->net: (null)
[ 52.337943@1] [dhd] WLC_E_IF: NO_IF set, event Ignored
[ 52.434566@2] type=1400 audit(1293883230.000:49): avc: denied { getattr } for pid=3729 comm=“android.ui” path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev=“sysfs” ino=10330 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[ 52.434664@3] [dhd] Random MAC OUI to be used - da:1:19
[ 52.458784@2] type=1400 audit(1293883250.652:50): avc: denied { getattr } for pid=3481 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=913933 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 52.493498@4] [dhd] dhd_dbg_attach_pkt_monitor, 1501
[ 52.495678@3] [dhd] net_os_enable_packet_filter: val = 0
[ 52.499133@3] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 2
[ 52.506869@2] [dhd] net_os_enable_packet_filter: val = 1
[ 52.512247@2] [dhd] net_os_enable_packet_filter: val = 0
[ 52.516159@2] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 3
[ 52.524248@2] [dhd] net_os_enable_packet_filter: val = 1
[ 52.528078@4] [dhd] dhd_set_suspend: Remove extra suspend setting
[ 52.533805@4] [dhd] dhd_enable_packet_filter: enter, value = 0
[ 52.637435@0] selinux: avc: denied { set } for property=dhclient.ipaddress.wlan0 pid=3729 uid=1000 gid=1000 scontext=u:r:system_server:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
[ 52.637435@0]
[ 57.094830@0] zram0: detected capacity change from 0 to 268435456
[ 57.118383@4] type=1400 audit(1293883250.652:50): avc: denied { getattr } for pid=3481 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=913933 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 57.122793@5] mkswap: Swapspace size: 262140k, UUID=dd0cf0e9-ac9e-4783-a325-6da59ee0eaa1
[ 57.137125@3] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
[ 57.149884@0] audit: audit_lost=16 audit_rate_limit=5 audit_backlog_limit=64
[ 57.149888@0] audit: rate limit exceeded
[ 57.164069@4] type=1400 audit(1293883255.336:51): avc: denied { net_raw } for pid=4409 comm=“cmdserver” capability=13 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=capability permissive=1
[ 57.182033@0] type=1400 audit(1293883255.336:51): avc: denied { net_raw } for pid=4409 comm=“cmdserver” capability=13 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=capability permissive=1
[ 57.199744@3] type=1400 audit(1293883255.336:52): avc: denied { setopt } for pid=4409 comm=“cmdserver” scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 57.215774@5] reg resource 2, start: ff63c10c,end: ff63c10f
[ 57.215776@5] reg resource 3, start: ff63c110,end: ff63c113
[ 57.215777@5] reg resource 4, start: ffd01088,end: ffd0108b
[ 57.215779@5] reg resource NN_CLK, start: ff63c1c8,end: ff63c1cb
[ 57.215781@5] npu_version: 2
[ 57.215832@5] galcore irq number is 53.
[ 57.215836@5] Galcore version 6.4.4.3.310723
[ 57.249869@3] type=1400 audit(1293883255.336:52): avc: denied { setopt } for pid=4409 comm=“cmdserver” scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 57.266107@3] type=1400 audit(1293883255.336:53): avc: denied { bind } for pid=4409 comm=“cmdserver” scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 57.311659@3] type=1400 audit(1293883255.336:53): avc: denied { bind } for pid=4409 comm=“cmdserver” scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 57.591653@4] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
[ 62.659504@0] fb: mem_free_work, free memory: addr:800000
[ 68.768819@4] type=1400 audit(1293883255.360:59): avc: denied { accept } for pid=4409 comm=“cmdserver” lport=40000 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
[ 68.781839@4] type=1400 audit(1293883266.988:77): avc: denied { getattr } for pid=3481 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=913933 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 68.848795@2] type=1400 audit(1293883266.988:77): avc: denied { getattr } for pid=3481 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=913933 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 68.867160@2] type=1400 audit(1293883267.068:78): avc: denied { read } for pid=5271 comm=“Binder:5271_4” name=“address” dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 68.888144@2] type=1400 audit(1293883267.068:78): avc: denied { read } for pid=5271 comm=“Binder:5271_4” name=“address” dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 68.908185@2] type=1400 audit(1293883267.068:79): avc: denied { open } for pid=5271 comm=“Binder:5271_4” path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 68.935269@2] type=1400 audit(1293883267.068:79): avc: denied { open } for pid=5271 comm=“Binder:5271_4” path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 68.962576@2] type=1400 audit(1293883267.068:80): avc: denied { getattr } for pid=5271 comm=“Binder:5271_4” path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 77.595020@1] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
[ 78.330761@3] type=1400 audit(1293883267.068:80): avc: denied { getattr } for pid=5271 comm=“Binder:5271_4” path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 78.352955@3] type=1400 audit(1293883276.548:81): avc: denied { search } for pid=3466 comm=“memtrack@1.0-se” name=“3449” dev=“proc” ino=14937 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
[ 78.374446@3] type=1400 audit(1293883276.548:81): avc: denied { search } for pid=3466 comm=“memtrack@1.0-se” name=“3449” dev=“proc” ino=14937 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
[ 78.385320@2] audit: audit_lost=33 audit_rate_limit=5 audit_backlog_limit=64
[ 78.385322@2] audit: rate limit exceeded
[ 78.406312@3] type=1400 audit(1293883276.548:82): avc: denied { read } for pid=3466 comm=“memtrack@1.0-se” name=“status” dev=“proc” ino=54504 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 78.427890@0] type=1400 audit(1293883276.548:82): avc: denied { read } for pid=3466 comm=“memtrack@1.0-se” name=“status” dev=“proc” ino=54504 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 78.449257@0] type=1400 audit(1293883276.548:83): avc: denied { open } for pid=3466 comm=“memtrack@1.0-se” path="/proc/3449/status" dev=“proc” ino=54504 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 78.471630@5] type=1400 audit(1293883276.548:83): avc: denied { open } for pid=3466 comm=“memtrack@1.0-se” path="/proc/3449/status" dev=“proc” ino=54504 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 78.493580@5] type=1400 audit(1293883276.548:84): avc: denied { getattr } for pid=3466 comm=“memtrack@1.0-se” path="/proc/3449/status" dev=“proc” ino=54504 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 78.516128@5] type=1400 audit(1293883276.548:84): avc: denied { getattr } for pid=3466 comm=“memtrack@1.0-se” path="/proc/3449/status" dev=“proc” ino=54504 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[ 78.538587@5] type=1400 audit(1293883276.604:85): avc: denied { search } for pid=3466 comm=“memtrack@1.0-se” name=“3458” dev=“proc” ino=14979 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_gnss_default:s0 tclass=dir permissive=1
[ 117.605628@1] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0
[ 126.469786@0] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 126.474464@0] init: Could not find service hosting interface android.hardware.radio@1.0::IRadio/slot1
[ 127.729860@4] type=1400 audit(1293883276.604:86): avc: denied { read } for pid=3466 comm=“memtrack@1.0-se” name=“status” dev=“proc” ino=51537 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_gnss_default:s0 tclass=file permissive=1
[ 127.745458@4] type=1400 audit(1293883325.948:109): avc: denied { getattr } for pid=3481 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=913933 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 129.176851@0] type=1400 audit(1293883325.948:109): avc: denied { getattr } for pid=3481 comm=“wifi@1.0-servic” path="/data/vendor/wifi/wid_fp" dev=“mmcblk0p20” ino=913933 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
[ 129.196045@1] type=1400 audit(1293883327.396:110): avc: denied { read write } for pid=6420 comm=4173796E635461736B202331 name=“bootalarm” dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 129.216882@1] type=1400 audit(1293883327.396:110): avc: denied { read write } for pid=6420 comm=4173796E635461736B202331 name=“bootalarm” dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 129.237589@1] type=1400 audit(1293883327.396:111): avc: denied { open } for pid=6420 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 129.267634@1] type=1400 audit(1293883327.396:111): avc: denied { open } for pid=6420 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 129.292619@1] type=1400 audit(1293883327.396:112): avc: denied { getattr } for pid=6420 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 129.504632@5] binder_alloc: 4472: binder_alloc_buf size 1056768 failed, no address space
[ 129.507145@5] binder_alloc: allocated: 3260 (num: 11 largest: 1756), free: 1037124 (num: 4 largest: 1036536)
[ 129.518435@5] binder: 4712:6008 transaction failed 29201/-28, size 1056768-0 line 3267
[ 129.845194@2] type=1400 audit(1293883327.396:112): avc: denied { getattr } for pid=6420 comm=4173796E635461736B202331 path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/bootalarm" dev=“sysfs” ino=18267 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 197.640633@1] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0
[ 360.163591@4] type=1400 audit(1293883328.064:115): avc: denied { getattr } for pid=5271 comm=“Binder:5271_3” path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev=“sysfs” ino=26186 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 360.185860@4] type=1400 audit(1293883558.384:116): avc: denied { call } for pid=4712 comm=“Thread-68” scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:hal_memtrack_default:s0 tclass=binder permissive=1
[ 365.572534@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 4, bssidx: 0
[ 525.567199@3] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 5, bssidx: 0
I again inserted krescue sd and, after emmc complete erase data it again shows :
[i] INITRD INIT :: UPTIME: 1.77 8.92 Linux (nessuno) 5.14.0-rc5 #1 SMP PREEMPT Wed Dec 15- Why?
G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02
L0:00000000
L1:20000703
L2:00008067
L3:14000000
B2:00402000
B1:e0f83180
TE: 264338
BL2 Built : 19:23:21, Sep 18 2020. g12b g9fde858 - gongwei.chen@droid11-sz
Board ID = 8
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
A53 clk: 1200 MHz
A73 clk: 1200 MHz
CLK81: 166.6M
smccc: 00045176
eMMC boot @ 0
sw8 s
board id: 8
Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
Get wrong ddr fw magic! Error!!
fw parse done
PIEI prepare done
00000000
emmc switch 1 ok
00000000
emmc switch 2 ok
NO find ddr boot_info from eMMC
fastboot data verify
result: 255
Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
LPDDR4 probe
LPDDR4_PHY_V_0_1_22-Built : 14:57:26, Sep 1 2020. g12b g3c95fed - gongwei.chen@droid11-sz
ddr clk to 1608MHz
00000000
emmc switch 0 ok
dmc_version 0001
Check phy result
INFO : End of CA training
INFO : End of initialization
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of Write leveling coarse delay
INFO : End of read delay center optimization
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of MPR read delay center optimization
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!
soc_vref_reg_value 0x 00000027 00000027 00000027 00000025 00000026 00000025 00000025 00000026 00000027 00000023 00000026 00000025 00000024 00000026 00000026 00000025 00000027 00000027 00000029 00000026 00000026 00000028 00000027 00000025 00000025 00000027 00000025 00000028 00000027 00000025 00000025 00000027 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
dram_vref_reg_value 0x 00000012
2D training succeed
auto size-- 65535DDR cs0 size: 2048MB
DDR cs1 size: 2048MB
DMC_DDR_CTRL: 00e00024DDR size: 3928MB
cs0 DataBus test pass
cs1 DataBus test pass
cs0 AddrBus test pass
cs1 AddrBus test pass
non-sec scramble use zero key
ddr scramble enabled
100bdlr_step_size ps== 420
result report
boot times 0Enable ddr reg access
00000000
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
00000000
emmc switch 0 ok
Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x0010ac00, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
[Image: g12b_v1.1.3396-c893a7153 2020-11-11 13:54:36 gongwei.chen@droid11-sz]
OPS=0x10
ring efuse init
chipver efuse init
29 0b 10 00 01 0f 13 00 00 02 37 30 4e 42 4e 50
[0.016082 Inits done]
secure task start!
high task start!
low task start!
run into bl31
NOTICE: BL31: v1.3(release):5c909a099
NOTICE: BL31: Built : 17:18:21, Nov 20 2020
NOTICE: BL31: G12A normal boot!
NOTICE: BL31: BL33 decompress pass
ERROR: Error initializing runtime service opteed_fast
U-Boot 2015.01-g7f9b2df431 (Sep 08 2021 - 23:49:44)
DRAM: 3.8 GiB
Relocation Offset is: d6d38000
mmu cfg end: 0xe0000000
mmu cfg end: 0xe0000000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 00000000d7e82630
aml_i2c_init_port init regs for 0
MCU version: 0x00 0x02
MCU version is to low! Doesn’t support froce boot from SD card.
NAND: get_sys_clk_rate_mtd() 292, clock setting 200!
bus cycle0: 6,timing: 7
NAND device id: 0 9f ff ff ff ff
No NAND device found!!!
nand init failed: -6
get_sys_clk_rate_mtd() 292, clock setting 200!
bus cycle0: 6,timing: 7
NAND device id: 0 9f ff ff ff ff
No NAND device found!!!
nand init failed: -6
MMC: aml_priv->desc_buf = 0x00000000d3d28a70
aml_priv->desc_buf = 0x00000000d3d2adb0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x1, tx-dly 0, clock 40000000
[set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
start dts,buffer=00000000d3d2d620,dt_addr=00000000d3d2d620
get_partition_from_dts() 92: ret 0
parts: 17
00: logo 0000000000800000 1
01: recovery 0000000001800000 1
02: misc 0000000000800000 1
03: dtbo 0000000000800000 1
04: cri_data 0000000000800000 2
05: param 0000000001000000 2
06: boot 0000000001000000 1
set has_boot_slot = 0
07: rsv 0000000001000000 1
08: metadata 0000000001000000 1
09: vbmeta 0000000000200000 1
10: tee 0000000002000000 1
11: vendor 000000001c000000 1
12: odm 0000000008000000 1
13: system 0000000064000000 1
14: product 0000000008000000 1
15: cache 0000000046000000 2
16: data ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
In: serial
Out: serial
Err: serial
aml log : internal sys error!
reboot_mode=cold_boot
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3354: calc 8afe665e, store 0
update_dtb_info()-3462: cpy 1 is not valid
_verify_dtb_checksum()-3354: calc 8afe665e, store 0
update_dtb_info()-3462: cpy 0 is not valid
dtb_read()-3569: total valid 0
emmc - EMMC sub system
Usage:
emmc dtb_read addr size
emmc dtb_write addr size
emmc erase dtb
emmc erase key
emmc fastboot_read addr size
emmc fastboot_write addr size
aml_i2c_init_port init regs for 0
fusb302_init: Device ID: 0x91
CC connected in 1 as UFP
charge ic max_vol = 12000mv max_cur = 6000ma
chip->pos_power = 3, chip->pd_output_vol=12000 chip->pd_output_cur=2000
fusb302 detect chip.port_num = 0
amlkey_init() enter!
[EFUSE_MSG]keynum is 1
vpu: driver version: v20190313
vpu: detect chip type: 9
vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
vpu: clk_level in dts: 7
vpu: vpu_power_on
vpu: set_vpu_clk
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: set_vpu_clk finish
vpu: vpu_module_init_config
vpp: vpp_init
vpp: vpp osd2 matrix rgb2yuv…
hdr_func 4, hdr_process_select 0x1
cvbs: cpuid:0x29
cvbs: find performance_pal config
LCD_RESET PIN: 0
lcd: lcd_debug_print flag: 0
lcd: detect mode: tablet, key_valid: 0
lcd: detect lcd_clk_path: 1
lcd: failed to get lcd_cpu_gpio_names
lcd: load config from dts
lcd: pinctrl_version: 2
lcd: use panel_type=lcd_1
lcd: bl: pinctrl_version: 2
lcd: bl: name: backlight_pwm, method: 1
lcd: error: gpio: wrong name invalid
lcd: bl: pwm_reg=0x00800002
lcd: bl: aml_bl_power_ctrl: 0
Net: use internal ethernet
--------ext_ethernet=0
+++++++++ext_ethernet=0
dwmac.ff3f0000amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 1
MACADDR:02:00:00:13:0f:01(from chipid)
ramdump_init, add:0, size:0
CONFIG_AVB2: null
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
wipe_data=successful
wipe_cache=successful
upgrade_step=0
aml log : internal sys error!
reboot_mode:::: cold_boot
lcd: error: outputmode[576cvbs] is not support
hpd_state=0
do_hpd_detect: hdmimode=1080p60hz
do_hpd_detect: colorattribute=444,8bit
Saving Environment to aml-storage…
mmc env offset: 0x4d400000
Writing to MMC(1)… done
no sink, fallback to 720p60hz[4]
hdr mode is 0
dv mode is ver:0 len: 0
hdr10+ mode is 0
read hdmichecksum 0x00000000, colorattribute 444,8bit
read hdmimode 1080p60hz, colorspace , colordepth
do_get_parse_edid: autoMode = false, manualMode=16
isYuv4kSink: false, maxTMDSRate=150
do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
TV is same, initial mode is: 576cvbs attr: 444,8bit
dolby_status 0
dolby_status 0
dolby_vision_process: no tv and dv disabled
Saving Environment to aml-storage…
mmc env offset: 0x4d400000
Writing to MMC(1)… done
[OSD]load fb addr from dts:/meson-fb
[OSD]set initrd_high: 0x7f800000
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0x7f800000 width=3840, height=2160
[OSD]osd_hw.free_dst_data: 0,719,0,575
[OSD]osd1_update_disp_freescale_enable
vpp: vpp_matrix_update: 2
cvbs_performance_enhancement
cvbs_config_hdmipll_g12a
cvbs_set_vid2_clk
hdr_packet
vpp: hdr_policy = 1
vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
normal power on
boot wol: disable
[reg_31] 0xd8a
[reg_16] 0x0
[reg_17] 0x7fff
[reg_19] 0x0
[reg_31] 0x0
[reg_31] 0xd40
[reg_22] 0x0
[reg_31] 0x0
saradc: 0x289, hw_ver: 0x32 (VIM3.V12)
gpio: pin GPIOAO_7 (gpio 7) value is 1
port mode is usb3.0
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn’t any datas,exit!
Hit Enter or space or Ctrl+C key to stop autoboot – : 0
cfgload: start …
cfgload: reading /boot.ini from mmc 0:1 …
card in
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
[set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
init_part() 282: PART_TYPE_DOS
[mmc_init] mmc init success
reading /boot.ini
9502 bytes read in 4 ms (2.3 MiB/s)
cfgload: applying boot.ini…
[#] Script a:d3d30f50 l:9472 c:0 s:0 - run
saradc: 0x289, hw_ver: 0x32 (VIM3.V12)
** KRESCUE START hwver: VIM3.V12 hostname: arm_gxbb maxcpus: 6 fdt: source: : target: **
[i] scan rescue device usb 0
** Bad device usb 0 **
[i] scan rescue device usb 1
** Bad device usb 1 **
[i] scan rescue device usb 2
** Bad device usb 2 **
[i] scan rescue device usb 1:5
** Bad device usb 1 **
[i] scan rescue device mmc 0
reading /rescue/80_user_env.txt
1898 bytes read in 4 ms (462.9 KiB/s)
[i] rescue loading via fatload mmc 0 …
[w] detect by maxcpus -6-
KRESCUE LOAD by fatload mmc 0 FROM // + post: // VIM3.V12 // VIM3.V12
load env
fatload mmc 0 0x32000000 /rescue/80_user_env.txt
reading /rescue/80_user_env.txt
1898 bytes read in 3 ms (617.2 KiB/s)
env import -t 0x32000000 76a
load logo
fatload mmc 0 0x30000000 /splash.bmp
reading /splash.bmp
7660 bytes read in 3 ms (2.4 MiB/s)
There is no valid bmp file at the given address
BMP KO
fatload mmc 0 0x30000000 /rescue/splash.bmp.2.gz
reading /rescue/splash.bmp.2.gz
** Unable to read file /rescue/splash.bmp.2.gz **
unzip 0x30000000 0x7f800000
Uncompressed size: 518454 = 0x7E936
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
KRESCUE_TIME: 1641796810
KRESCUE_DATE: Mon Jan 10 06:40:10 2022
KRESCUE_VER : 220110_266
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
addrs: UIMAGE_ADDR :: UINITRD_ADDR :: DTB_ADDR
addrs: 0x1080000 :: 0x8000000 :: 0x1000000
setenv kernel_addr_r ; setenv ramdisk_addr_r ; setenv fdt_addr_r ;
:::::::::::::::
load dtb
fatload mmc 0 0x1000000 /rescue/fdt.kresq/amlogic/meson-g12b-a311d-khadas-vim3.dtb
reading /rescue/fdt.kresq/amlogic/meson-g12b-a311d-khadas-vim3.dtb
76986 bytes read in 12 ms (6.1 MiB/s)
libfdt fdt_path_offset() returned FDT_ERR_BADPATH
port mode is usb3.0
** port mode is 0 **
load packed initrd
fatload mmc 0 0x8000000 /rescue/uInitrd
reading /rescue/uInitrd
9155280 bytes read in 485 ms (18 MiB/s)
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[i] bootargs: rw panic=10 net.ifnames=0 loglevel=4 fbcon=font:TER16x32 video=HDMI-A-1:1920x1080@60e config_firewall=private kresq_type=sd config_test=sd booted= hwver=VIM3.V12 no_console_suspend consoleblank=0 dtb=/rescue/fdt.kresq/amlogic/meson-g12b-a311d-khadas-vim3.dtb
[i] bootcmd: run storeboot
load packed kernel
bootm 0x1080000 0x8000000 0x1000000
fatload mmc 0 0x1080000 /rescue/uImage
reading /rescue/uImage
6547474 bytes read in 348 ms (17.9 MiB/s)
avb2: 0
ee_gate_off …
avb2: 0
Booting kernel from Legacy Image at 01080000 …
Image Name: kernel
Image Type: AArch64 Linux Kernel Image (gzip compressed)
Data Size: 6547410 Bytes = 6.2 MiB
Load Address: 0d080000
Entry Point: 0d080000
Verifying Checksum … OK
Loading init Ramdisk from Legacy Image at 08000000 …
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 9155216 Bytes = 8.7 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum … OK
[store]Is good fdt check header, no need decrypt!
active_slot is normal
load dtb from 0x1000000 …
Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
find 1 dtbos
No androidboot.dtbo_idx configured
And no dtbos will be applied
Uncompressing Kernel Image … OK
kernel loaded at 0x0d080000, end = 0x0e09ba00
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] fdt get prop fail.
Loading Ramdisk to 7ef44000, end 7f7ff290 … OK
Loading Device Tree to 000000001ffea000, end 000000001ffffd6f … OK
fdt_fixup_memory_banks, reg:000000001fff6378
DTS already have ‘reg’ property
Starting kernel …
uboot time: 4381280 us
[i] INITRD INIT :: UPTIME: 1.77 8.92 Linux (none) 5.14.0-rc5 #1 SMP PREEMPT Wed Dec 15 10:08:36 CST 2021 aarch64 GNU/Linux
[i] init display
failed to find a module named meson_ee_pwrc
failed to find a module named meson_dw_hdmi
#MANUAL
link/ether 02:00:00:13:0f:01 brd ff:ff:ff:ff:ff:ff
BusyBox v1.30.1 () built-in shell (ash)
Krescue
__ _____ Khadas ## hyphop ##
/ //_/ _ \___ ___ ______ _____
/ ,< / , / -|-</ __/ // / -)
//|//||_//_/_,/__/
extreme tiny and fast rescue system
BUILD: 220110_266 from: Mon Jan 10 06:40:10 2022
[i] POST_CONFIG: kresq_type=sd + booted= + || start: /dev/mmcblk0
[i] Device: VIM3 Amlogic:G12B ver:0x0002 6 cores 2G ram 29.1 G eMMC
[w] root password undefined
[i] just type > krescue < to start gui
root@Krescue:/#
I have never used Android so this is a guess to the no video problem.
Make sure you do full emmc erase not the fast.
Trying installing the 4.9 kernel, ubuntu server or gnome. I know those images work very well. If it does not work after installing those I would say it might very well be an issue related to the HDMI chip. Core of the board is working fine or it would not run krescue.
Thank you very much
Tomorrow I will try to install Ubuntu.
Failed to find a module named meson_ee_pwrc
failed to find a module named meson_dw_hdmi
Could it be the problem? Is there a way to correct it?
Not sure what needs to be done with android, sorry.