VIM3 Pro Ubuntu无法正常启动，

zfuwen · January 4, 2023, 1:59am

Which Khadas SBC do you use?

VIM3 Pro

Which system do you use? Android, Ubuntu, OOWOW or others?

Ubuntu

Which version of system do you use? Khadas official images, self built images, or others?

VIM3_pro_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.9-211217.img

Please describe your issue below:

系统无法正常启动

Post a console log of your issue below:

[   11.865182@4] meson_cdev index: 0
[   11.868521@4] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[   11.877610@4] meson_cdev index: 1
[   11.880869@4] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-1 failed:-22
[   11.889960@4] meson_cdev index: 2
[   11.893220@4] cpucore_cooling_register, max_cpu_core_num:2
[   11.898743@4] meson_cdev index: 3
[   11.901980@4] cpucore_cooling_register, max_cpu_core_num:4
[   11.907487@4] meson_cdev index: 4
[   11.910784@4] meson_cdev index: 5
[   11.914047@4] find tzd id: 0
[   11.916958@4] find tzd id: 0
[   11.919805@4] find tzd id: 0
[   11.922629@4] meson_cdev probe done
[   11.926082@4] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   11.932875@4] gxbb_pm: enter meson_pm_probe!
[   11.937013@4] gxbb_pm: meson_pm_probe done
[   11.941481@4] ALSA device list:
[   11.944178@4]   #0: AML-AUGESOUND
[   11.949499@4] Freeing unused kernel memory: 5568K
[   12.091247@4] hub 1-1:1.0: USB hub found
[   12.092157@4] hub 1-1:1.0: 4 ports detected
[   12.142948@5] coherent pool not initialised!
[   12.143806@5] ------------[ cut here ]------------
[   12.147187@5] WARNING: CPU: 5 PID: 2462 at arch/arm64/mm/dma-mapping.c:62 __alloc_from_pool.isra.9+0xb0/0xc0
[   12.156969@5] Modules linked in:
[   12.160847@5] 
[   12.161822@5] CPU: 5 PID: 2462 Comm: systemd-udevd Not tainted 4.9.241 #18
[   12.168664@5] Hardware name: Khadas VIM3 (DT)
[   12.172999@5] task: ffffffc099f36200 task.stack: ffffff8020288000
[   12.179071@5] PC is at __alloc_from_pool.isra.9+0xb0/0xc0
[   12.184442@5] LR is at __alloc_from_pool.isra.9+0xb0/0xc0
[   12.189810@5] pc : [<ffffff800909c3b8>] lr : [<ffffff800909c3b8>] pstate: 40000145
[   12.197348@5] sp : ffffff802028b630
[   12.200815@5] x29: ffffff802028b630 x28: ffffffc09b3dad58 
[   12.206923@5] x27: 0000000000001000 x26: 0000000002080020 
[   12.212381@5] x25: ffffffc09b10f8a0 x24: ffffffc09b3dad58 
[   12.217832@5] x23: ffffff802028b7c8 x22: ffffff8009219340 
[   12.223298@5] x21: ffffff802028b6a8 x20: 0000000000001000 
[   12.228732@5] x19: ffffff800ac68000 x18: 0000000000000001 
[   12.234164@5] x17: 0000007f9d09bdd0 x16: 0000000000000000 
[   12.239601@5] x15: 0000000000000001 x14: ffffff8009f99268 
[   12.245035@5] x13: 0000000000000000 x12: 00000000ffffffff 
[   12.250487@5] x11: 0000000000000010 x10: 000000000000040e 
[   12.255936@5] x9 : 0000000000000001 x8 : ffffff800943f188 
[   12.261387@5] x7 : 0000000000003ff0 x6 : 0000000000000000 
[   12.266841@5] x5 : ffffff8009111408 x4 : ffffffc0a0373050 
[   12.272311@5] x3 : ffffff802028b3e0 x2 : 0000000000000000 
[   12.277772@5] x1 : 0000000000000000 x0 : 000000000000001e 
[   12.283242@5] 
[   12.283242@5] X4: 0xffffffc0a0372fd0:
[   12.288001@5] 2fd0  08003000 ffffff80 00000000 00000000 a036f060 ffffffc0 a0373050 ffffffc0
[   12.296871@5] 2ff0  00000001 00000000 00000000 00000000 a0373040 ffffffc0 09083284 ffffff80
[   12.305178@5] 3010  2028b360 ffffff80 ffffffff 0000007f a037cb10 ffffffc0 09111934 ffffff80
[   12.313506@5] 3030  40000145 00000000 00000000 00000000 2028b490 ffffff80 2028b360 ffffff80
[   12.321833@5] 3050  00000000 00000000 00000000 00000000 99f36c90 ffffffc0 00000000 00000000
[   12.330158@5] 3070  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.338471@5] 3090  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.346776@5] 30b0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.355086@5] 
[   12.355086@5] X24: 0xffffffc09b3dacd8:
[   12.359935@5] acd8  00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.368809@5] acf8  00000000 00000000 9b3da840 ffffffc0 00000000 00000000 00000000 00000000
[   12.377125@5] ad18  9ae2b800 ffffffc0 00000001 00000000 14be0f00 00000000 200f7d70 ffffff80
[   12.385430@5] ad38  0950b2d0 ffffff80 9b3da940 ffffffc0 00000000 00000000 9b3dad50 ffffffc0
[   12.393724@5] ad58  9b3dad50 ffffffc0 9b3dad60 ffffffc0 9b3dad60 ffffffc0 9ae2b800 ffffffc0
[   12.402055@5] ad78  09086910 ffffff80 692f2e2e 643a6f69 63697665 00003065 9b3dad90 ffffffc0
[   12.410373@5] ad98  9b3dad90 ffffffc0 9b3dada0 ffffffc0 9b3dada0 ffffffc0 9ae29c00 ffffffc0
[   12.418691@5] adb8  200f78d8 ffffff80 9b3daa00 ffffffc0 00000000 00000000 00000000 00000000
[   12.427005@5] 
[   12.427005@5] X25: 0xffffffc09b10f820:
[   12.431868@5] f820  9afe7a18 ffffffc0 9a1c3840 ffffffc0 00000000 00000000 00000000 2262126f
[   12.440720@5] f840  2262126f 00010802 01000003 01b05070 00020130 00000000 00000000 00000000
[   12.449033@5] f860  0ab32478 ffffff80 ffffffff ffffffff 00010000 00000000 ffffffff 00000000
[   12.457362@5] f880  00000000 00102040 0000000a 00000064 00000000 00000000 00000001 00000000
[   12.465688@5] f8a0  9b10e8a0 ffffffc0 9b3fc600 ffffffc0 9ad1d080 ffffffc0 9afcf030 ffffffc0
[   12.474019@5] f8c0  9b10f140 ffffffc0 9b10e8b0 ffffffc0 9bada100 ffffffc0 0ab2a650 ffffff80
[   12.482342@5] f8e0  9af2fbb8 ffffffc0 00000007 00000007 00000000 00000000 0ab1fbc0 ffffff80
[   12.490673@5] f900  00000001 00000000 9b10f908 ffffffc0 9b10f908 ffffffc0 00000000 00000000
[   12.499011@5] 
[   12.499011@5] X28: 0xffffffc09b3dacd8:
[   12.503801@5] acd8  00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.512743@5] acf8  00000000 00000000 9b3da840 ffffffc0 00000000 00000000 00000000 00000000
[   12.521066@5] ad18  9ae2b800 ffffffc0 00000001 00000000 14be0f00 00000000 200f7d70 ffffff80
[   12.529398@5] ad38  0950b2d0 ffffff80 9b3da940 ffffffc0 00000000 00000000 9b3dad50 ffffffc0
[   12.537725@5] ad58  9b3dad50 ffffffc0 9b3dad60 ffffffc0 9b3dad60 ffffffc0 9ae2b800 ffffffc0
[   12.546047@5] ad78  09086910 ffffff80 692f2e2e 643a6f69 63697665 00003065 9b3dad90 ffffffc0
[   12.554378@5] ad98  9b3dad90 ffffffc0 9b3dada0 ffffffc0 9b3dada0 ffffffc0 9ae29c00 ffffffc0
[   12.562714@5] adb8  200f78d8 ffffff80 9b3daa00 ffffffc0 00000000 00000000 00000000 00000000
[   12.571032@5] 
[   12.572009@5] ---[ end trace 263c0eafb2e806b9 ]---
[   12.576776@5] Call trace:
[   12.579376@5] Exception stack(0xffffff802028b450 to 0xffffff802028b580)
[   12.585963@5] b440:                                   ffffff800ac68000 0000007fffffffff
[   12.593936@5] b460: ffffffc0a037cb10 ffffff800909c3b8 0000000040000145 0000000000000000
[   12.601909@5] b480: 0000000100000001 ffffff800a2dd760 ffffff802028b530 ffffff8009111b20
[   12.609882@5] b4a0: ffffff802028b590 ffffff800a2d3fb0 ffffff802028b6a8 ffffff8009219340
[   12.617856@5] b4c0: ffffff802028b7c8 ffffffc09b3dad58 ffffffc09b10f8a0 0000000002080020
[   12.625829@5] b4e0: 0000000000001000 ffffffc09b3dad58 ffffffc09b803800 0000000000000000
[   12.633802@5] b500: 000000000000001e 0000000000000000 0000000000000000 ffffff802028b3e0
[   12.641776@5] b520: ffffffc0a0373050 ffffff8009111408 0000000000000000 0000000000003ff0
[   12.649749@5] b540: ffffff800943f188 0000000000000001 000000000000040e 0000000000000010
[   12.657722@5] b560: 00000000ffffffff 0000000000000000 ffffff8009f99268 0000000000000001
[   12.665702@5] [ffffff802028b630+  48][<ffffff800909c3b8>] __alloc_from_pool.isra.9+0xb0/0xc0
[   12.674103@5] [ffffff802028b660+  80][<ffffff800909ca7c>] __dma_alloc+0x11c/0x258
[   12.681559@5] [ffffff802028b6b0+ 112][<ffffff8009219340>] dma_pool_alloc+0x218/0x248
[   12.689271@5] [ffffff802028b720+ 240][<ffffff8009673e6c>] nvme_queue_rq+0x3cc/0x5b0
[   12.696898@5] [ffffff802028b810+ 160][<ffffff80094cf0fc>] blk_mq_make_request+0x2e4/0x3f0
[   12.705044@5] [ffffff802028b8b0+  80][<ffffff80094c131c>] generic_make_request+0xbc/0x240
[   12.713189@5] [ffffff802028b900+  96][<ffffff80094c156c>] submit_bio+0xcc/0x1e0
[   12.720470@5] [ffffff802028b960+  48][<ffffff800928ac2c>] mpage_bio_submit+0x5c/0x98
[   12.728182@5] [ffffff802028b990+ 224][<ffffff800928b258>] do_mpage_readpage+0x5f0/0x6d0
[   12.736156@5] [ffffff802028ba70+ 224][<ffffff800928b434>] mpage_readpages+0xfc/0x1a0
[   12.743870@5] [ffffff802028bb50+  48][<ffffff8009284584>] blkdev_readpages+0x3c/0x50
[   12.751584@5] [ffffff802028bb80+ 208][<ffffff80091d51e0>] __do_page_cache_readahead+0x1e0/0x2b0
[   12.760250@5] [ffffff802028bc50+  64][<ffffff80091d5674>] force_page_cache_readahead+0xb4/0x110
[   12.768917@5] [ffffff802028bc90+  64][<ffffff80091d5758>] page_cache_sync_readahead+0x88/0xa0
[   12.777410@5] [ffffff802028bcd0+ 192][<ffffff80091c5b98>] generic_file_read_iter+0x5c0/0x808
[   12.785816@5] [ffffff802028bd90+  32][<ffffff8009284a08>] blkdev_read_iter+0x50/0x78
[   12.793530@5] [ffffff802028bdb0+ 144][<ffffff800923e5e8>] __vfs_read+0xd0/0x110
[   12.800810@5] [ffffff802028be40+  64][<ffffff800923f4fc>] vfs_read+0x94/0x150
[   12.807916@5] [ffffff802028be80+   0][<ffffff8009240c24>] SyS_read+0x5c/0xc8
[   12.814937@5] [0000000000000000+   0][<ffffff8009083b40>] el0_svc_naked+0x34/0x38
[   12.822588@5] coherent pool not initialised!
[   12.825548@4] coherent pool not initialised!
[   12.825554@4] ------------[ cut here ]------------
[   12.825565@4] WARNING: CPU: 4 PID: 2462 at arch/arm64/mm/dma-mapping.c:62 __alloc_from_pool.isra.9+0xb0/0xc0
[   12.825568@4] Modules linked in:
[   12.825569@4] 
[   12.825573@4] CPU: 4 PID: 2462 Comm: systemd-udevd Tainted: G        W       4.9.241 #18
[   12.825574@4] Hardware name: Khadas VIM3 (DT)
[   12.825576@4] task: ffffffc099f36200 task.stack: ffffff8020288000
[   12.825578@4] PC is at __alloc_from_pool.isra.9+0xb0/0xc0
[   12.825580@4] LR is at __alloc_from_pool.isra.9+0xb0/0xc0
[   12.825581@4] pc : [<ffffff800909c3b8>] lr : [<ffffff800909c3b8>] pstate: 40000145
[   12.825582@4] sp : ffffff802028b710
[   12.825585@4] x29: ffffff802028b710 x28: ffffffc09823ce18 
[   12.825587@4] x27: 0000000000001000 x26: 0000000002080020 
[   12.825589@4] x25: ffffffc09b10f8a0 x24: ffffffc09823ce18 
[   12.825591@4] x23: ffffff802028b8a8 x22: ffffff8009219340 
[   12.825593@4] x21: ffffff802028b788 x20: 0000000000001000 
[   12.825595@4] x19: ffffff800ac68000 x18: 0000000000000000 
[   12.825597@4] x17: 0000007f9d09bdd0 x16: ffffff8009240bc8 
[   12.825599@4] x15: 0000000000000230 x14: 0000000000000000 
[   12.825601@4] x13: ffffffbf02601b40 x12: ffffff800aac4000 
[   12.825603@4] x11: 0000000000000000 x10: ffffff800ac6d000 
[   12.825606@4] x9 : 0000000000000000 x8 : ffffff800ac84b98 
[   12.825608@4] x7 : 0000000000003ff0 x6 : 0000000000000000 
[   12.825610@4] x5 : ffffff8009108370 x4 : ffffffc0a035a050 
[   12.825612@4] x3 : ffffff802028b500 x2 : 0000000000000000 
[   12.825614@4] x1 : 0000000000000000 x0 : 000000000000001e 
[   12.825616@4] 
[   12.825616@4] X4: 0xffffffc0a0359fd0:
[   12.825623@4] 9fd0  08003000 ffffff80 0a61d7b0 ffffff80 a0356060 ffffffc0 a035a050 ffffffc0
[   12.825629@4] 9ff0  00000001 00000000 00000000 00000000 a035a040 ffffffc0 09083284 ffffff80
[   12.825636@4] a010  2003fe00 ffffff80 ffffffff 0000007f a0363b10 ffffffc0 09085ff0 ffffff80
[   12.825642@4] a030  40000145 00000000 00000000 00000000 2003ff30 ffffff80 2003fe00 ffffff80
[   12.825648@4] a050  00000000 00000000 00000000 00000000 9b36b490 ffffffc0 00000000 00000000
[   12.825654@4] a070  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825660@4] a090  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825666@4] a0b0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825669@4] 
[   12.825669@4] X24: 0xffffffc09823cd98:
[   12.825675@4] cd98  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825682@4] cdb8  00000000 00000000 702f2e2e 62717974 00000000 00000000 9823cdd0 ffffffc0
[   12.825688@4] cdd8  9823cdd0 ffffffc0 9823cde0 ffffffc0 9823cde0 ffffffc0 00000000 00000000
[   12.825694@4] cdf8  00000000 00000000 9823ce40 ffffffc0 00000000 00000000 9823ce10 ffffffc0
[   12.825700@4] ce18  9823ce10 ffffffc0 9823ce20 ffffffc0 9823ce20 ffffffc0 00000000 00000000
[   12.825706@4] ce38  00000000 00000000 9823ce80 ffffffc0 00000000 00000000 00000000 00000000
[   12.825712@4] ce58  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825718@4] ce78  00000000 00000000 9823cec0 ffffffc0 00000000 00000000 00000000 00000000
[   12.825719@4] 
[   12.825719@4] X25: 0xffffffc09b10f820:
[   12.825726@4] f820  9afe7a18 ffffffc0 9a1c3840 ffffffc0 00000000 00000000 00000000 2262126f
[   12.825732@4] f840  2262126f 00010802 01000003 01b05070 00020130 00000000 00000000 00000000
[   12.825738@4] f860  0ab32478 ffffff80 ffffffff ffffffff 00010000 00000000 ffffffff 00000000
[   12.825744@4] f880  00000000 00102040 0000000a 00000064 00000000 00000000 00000001 00000000
[   12.825750@4] f8a0  9b10e8a0 ffffffc0 9b3fc600 ffffffc0 9ad1d080 ffffffc0 9afcf030 ffffffc0
[   12.825757@4] f8c0  9b10f140 ffffffc0 9b10e8b0 ffffffc0 9bada100 ffffffc0 0ab2a650 ffffff80
[   12.825763@4] f8e0  9af2fbb8 ffffffc0 00000007 00000007 00000000 00000000 0ab1fbc0 ffffff80
[   12.825769@4] f900  00000001 00000000 9b10f908 ffffffc0 9b10f908 ffffffc0 00000000 00000000
[   12.825770@4] 
[   12.825770@4] X28: 0xffffffc09823cd98:
[   12.825776@4] cd98  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825782@4] cdb8  00000000 00000000 702f2e2e 62717974 00000000 00000000 9823cdd0 ffffffc0
[   12.825788@4] cdd8  9823cdd0 ffffffc0 9823cde0 ffffffc0 9823cde0 ffffffc0 00000000 00000000
[   12.825795@4] cdf8  00000000 00000000 9823ce40 ffffffc0 00000000 00000000 9823ce10 ffffffc0
[   12.825801@4] ce18  9823ce10 ffffffc0 9823ce20 ffffffc0 9823ce20 ffffffc0 00000000 00000000
[   12.825807@4] ce38  00000000 00000000 9823ce80 ffffffc0 00000000 00000000 00000000 00000000
[   12.825813@4] ce58  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   12.825819@4] ce78  00000000 00000000 9823cec0 ffffffc0 00000000 00000000 00000000 00000000
[   12.825820@4] 
[   12.825821@4] ---[ end trace 263c0eafb2e806ba ]---
[   12.825822@4] Call trace:
[   12.825824@4] Exception stack(0xffffff802028b530 to 0xffffff802028b660)
[   12.825826@4] b520:                                   ffffff800ac68000 0000007fffffffff
[   12.825828@4] b540: ffffffc0a0363b10 ffffff800909c3b8 0000000040000145 ffffff8009111974
[   12.825829@4] b560: ffffff800ac6d000 0000000000000004 ffffff802028b610 ffffff8009111b20
[   12.825831@4] b580: ffffff802028b670 ffffff800a2d3fb0 ffffff802028b788 ffffff8009219340
[   12.825833@4] b5a0: ffffff802028b8a8 ffffffc09823ce18 ffffffc09b10f8a0 0000000002080020
[   12.825834@4] b5c0: 0000000000001000 ffffffc09823ce18 00000000000001c0 0000000000000000
[   12.825836@4] b5e0: 000000000000001e 0000000000000000 0000000000000000 ffffff802028b500
[   12.825837@4] b600: ffffffc0a035a050 ffffff8009108370 0000000000000000 0000000000003ff0
[   12.825839@4] b620: ffffff800ac84b98 0000000000000000 ffffff800ac6d000 0000000000000000
[   12.825841@4] b640: ffffff800aac4000 ffffffbf02601b40 0000000000000000 0000000000000230
[   12.825844@4] [ffffff802028b710+  48][<ffffff800909c3b8>] __alloc_from_pool.isra.9+0xb0/0xc0
[   12.825847@4] [ffffff802028b740+  80][<ffffff800909ca7c>] __dma_alloc+0x11c/0x258
[   12.825851@4] [ffffff802028b790+ 112][<ffffff8009219340>] dma_pool_alloc+0x218/0x248
[   12.825856@4] [ffffff802028b800+ 240][<ffffff8009673e6c>] nvme_queue_rq+0x3cc/0x5b0
[   12.825859@4] [ffffff802028b8f0+ 160][<ffffff80094cf0fc>] blk_mq_make_request+0x2e4/0x3f0
[   12.825863@4] [ffffff802028b990+  80][<ffffff80094c131c>] generic_make_request+0xbc/0x240
[   12.825864@4] [ffffff802028b9e0+  96][<ffffff80094c156c>] submit_bio+0xcc/0x1e0
[   12.825867@4] [ffffff802028ba40+  48][<ffffff800928ac2c>] mpage_bio_submit+0x5c/0x98
[   12.825869@4] [ffffff802028ba70+ 224][<ffffff800928b46c>] mpage_readpages+0x134/0x1a0
[   12.825872@4] [ffffff802028bb50+  48][<ffffff8009284584>] blkdev_readpages+0x3c/0x50
[   12.825876@4] [ffffff802028bb80+ 208][<ffffff80091d51e0>] __do_page_cache_readahead+0x1e0/0x2b0
[   12.825878@4] [ffffff802028bc50+  64][<ffffff80091d5674>] force_page_cache_readahead+0xb4/0x110
[   12.825881@4] [ffffff802028bc90+  64][<ffffff80091d5758>] page_cache_sync_readahead+0x88/0xa0
[   12.825883@4] [ffffff802028bcd0+ 192][<ffffff80091c5b98>] generic_file_read_iter+0x5c0/0x808
[   12.825886@4] [ffffff802028bd90+  32][<ffffff8009284a08>] blkdev_read_iter+0x50/0x78
[   12.825890@4] [ffffff802028bdb0+ 144][<ffffff800923e5e8>] __vfs_read+0xd0/0x110
[   12.825892@4] [ffffff802028be40+  64][<ffffff800923f4fc>] vfs_read+0x94/0x150
[   12.825894@4] [ffffff802028be80+   0][<ffffff8009240c24>] SyS_read+0x5c/0xc8
[   12.825898@4] [0000000000000000+   0][<ffffff8009083b40>] el0_svc_naked+0x34/0x38
[   13.504204@5] ------------[ cut here ]------------
[   13.508970@5] WARNING: CPU: 5 PID: 2131 at arch/arm64/mm/dma-mapping.c:62 __alloc_from_pool.isra.9+0xb0/0xc0
[   13.518755@5] Modules linked in:
[   13.522605@5] 
[   13.523610@5] CPU: 5 PID: 2131 Comm: kworker/5:1H Tainted: G        W       4.9.241 #18
[   13.531581@5] Hardware name: Khadas VIM3 (DT)
[   13.535919@5] Workqueue: kblockd blk_mq_run_work_fn
[   13.541429@5] task: ffffffc09a1d0e00 task.stack: ffffff80201d0000
[   13.546836@5] PC is at __alloc_from_pool.isra.9+0xb0/0xc0
[   13.552209@5] LR is at __alloc_from_pool.isra.9+0xb0/0xc0
[   13.557582@5] pc : [<ffffff800909c3b8>] lr : [<ffffff800909c3b8>] pstate: 40000145
[   13.565121@5] sp : ffffff80201d3ac0
[   13.568588@5] x29: ffffff80201d3ac0 x28: ffffffc09b3dad58 
[   13.574695@5] x27: 0000000000001000 x26: 0000000002080020 
[   13.580158@5] x25: ffffffc09b10f8a0 x24: ffffffc09b3dad58 
[   13.585618@5] x23: ffffff80201d3c58 x22: ffffff8009219340 
[   13.591068@5] x21: ffffff80201d3b38 x20: 0000000000001000 
[   13.596523@5] x19: ffffff800ac68000 x18: 0000000000000001 
[   13.601973@5] x17: 0000007f9d09bdd0 x16: 0000000000000000 
[   13.607428@5] x15: 0000000000000001 x14: ffffff8009f99268 
[   13.612884@5] x13: 0000000000000000 x12: 00000000ffffffff 
[   13.618323@5] x11: 0000000000000010 x10: 00000000000004cf 
[   13.623771@5] x9 : 0000000000000001 x8 : ffffff800943f188 
[   13.629226@5] x7 : 0000000000003ff0 x6 : 0000000000000000 
[   13.634680@5] x5 : ffffff8009111408 x4 : ffffffc0a0373050 
[   13.640142@5] x3 : ffffff80201d3870 x2 : 0000000000000000 
[   13.645602@5] x1 : 0000000000000000 x0 : 000000000000001e

zfuwen · January 4, 2023, 2:03am

** 3390 printk messages dropped ** [  368.913001@2] x13bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02

L0:00000000
L1:20000703
L2:00008067
L3:14000000
B2:00402000
B1:e0f83180

TE: 176918

BL2 Built : 15:22:05, Aug 28 2019. g12b g1bf2b53 - luan.yuan@droid15-sz

Board ID = 8
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
A53 clk: 1200 MHz
A73 clk: 1200 MHz
CLK81: 166.6M
smccc: 0002faf4
eMMC boot @ 0
sw8 s
DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 15:22:01
board id: 8
Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
PIEI prepare done
fastboot data load
00000000
emmc switch 1 ok
ddr saved addr:00016000
Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
00000000
emmc switch 0 ok
fastboot data verify
verify result: 265
Cfg max: 4, cur: 1. Board id: 255. Force loop cfg
LPDDR4 probe
ddr clk to 1608MHz
Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0

dmc_version 0001
Check phy result
INFO : End of CA training
INFO : End of initialization
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of Write leveling coarse delay
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!

channel==0
RxClkDly_Margin_A0==97 ps 10
TxDqDly_Margin_A0==106 ps 11
RxClkDly_Margin_A1==87 ps 9
TxDqDly_Margin_A1==97 ps 10
TrainedVREFDQ_A0==66
TrainedVREFDQ_A1==66
VrefDac_Margin_A0==29
DeviceVref_Margin_A0==32
VrefDac_Margin_A1==30
DeviceVref_Margin_A1==32


channel==1
RxClkDly_Margin_A0==97 ps 10
TxDqDly_Margin_A0==106 ps 11
RxClkDly_Margin_A1==87 ps 9
TxDqDly_Margin_A1==97 ps 10
TrainedVREFDQ_A0==30
TrainedVREFDQ_A1==30
VrefDac_Margin_A0==28
DeviceVref_Margin_A0==30
VrefDac_Margin_A1==31
DeviceVref_Margin_A1==30

 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004 

soc_vref_reg_value 0x 00000024 00000025 00000025 00000025 00000024 00000025 00000024 00000024 00000025 00000023 00000023 00000025 00000025 00000025 00000024 00000025 00000023 00000024 00000024 00000024 00000025 00000024 00000023 00000023 00000024 00000025 00000024 00000026 00000025 00000025 00000025 00000023 dram_vref_reg_value 0x 00000015
2D training succeed
aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 13:54:19
auto size-- 65535DDR cs0 size: 2048MB
DDR cs1 size: 2048MB
DMC_DDR_CTRL: 00e00024DDR size: 3928MB
cs0 DataBus test pass
cs1 DataBus test pass
cs0 AddrBus test pass
cs1 AddrBus test pass

100bdlr_step_size ps== 420
result report
boot times 0Enable ddr reg access
00000000
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
00000000
emmc switch 0 ok
Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000d0000, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
MVN_1=0x00000000
MVN_2=0x00000000
[Image: g12b_v1.1.3390-6ac5299 2019-09-26 14:10:05 luan.yuan@droid15-sz]
OPS=0x10
ring efuse init
chipver efuse init
29 0b 10 00 01 23 22 00 00 16 31 34 32 58 33 50 
[0.018961 Inits done]
secure task start!
high task start!
low task start!
run into bl31
NOTICE:  BL31: v1.3(release):4fc40b1
NOTICE:  BL31: Built : 15:58:17, May 22 2019
NOTICE:  BL31: G12A normal boot!
NOTICE:  BL31: BL33 decompress pass
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01 (Dec 17 2021 - 17:10:27)

DRAM:  3.8 GiB
Relocation Offset is: d6e42000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 00000000d7f39210
aml_i2c_init_port init regs for 0
MCU version: 0x00 0x03
MCU version is to low! Doesn't support froce boot from SD card.
MMC:   aml_priv->desc_buf = 0x00000000d3e32a70
aml_priv->desc_buf = 0x00000000d3e34db0
SDIO Port B: 0, SDIO Port C: 1

numbqq · January 4, 2023, 2:06am

试试最新固件看看：https://dl.khadas.com/products/vim3/firmware/ubuntu/emmc/vim3-ubuntu-20.04-server-linux-4.9-fenix-1.4-221229-emmc.img.xz

看了下log，你接了SSD吗？如果是，先移除看看？

zfuwen · January 4, 2023, 2:55am

接SSD了，这个项目一直都要求连接并使用SSD呢。
和SSD有关吗？

zfuwen · January 4, 2023, 2:56am

新固件和旧固件有什么区别吗？？是否能将修改点列出来给我们看下

因这些都是在线运行的项目，需要替换系统的话，我们需要知道差异，可能会带来什么问题都需要评估。

zfuwen · January 4, 2023, 3:35am

[   13.342734@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[   13.347913@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   13.350959@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   13.358940@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe64 hci version 0x110 quirks 0x00010010
[   13.367613@3] xhci-hcd xhci-hcd.0.auto: irq 15, io mem 0xff500000
[   13.373952@3] hub 1-0:1.0: USB hub found
[   13.377569@3] hub 1-0:1.0: 2 ports detected
[   13.381860@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   13.387355@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   13.395176@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   13.403606@3] hub 2-0:1.0: USB hub found
[   13.407293@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[   13.414639@3] usb usb2: Unsupported the hub
[   13.419000@3] i2c i2c-4: sensor_probe: kxtj3,ffffffc099c3a800
[   13.424604@3] sensors 4-000e: sensor_chip_init:kxtj3:devid=0x35,ops=0xffffff800ab48330
[   13.432807@3] input: gsensor as /devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-000e/input/input3
[   13.442381@3] sensors 4-000e: sensor_irq_init:use polling,delay=30 ms
[   13.448504@3] sensors 4-000e: sensor_misc_device_register:miscdevice: accel
[   13.455387@3] sensors 4-000e: sensor_probe:initialized ok,sensor name:kxtj3,type:2,id=0
[   13.455387@3] 
[   13.465031@3] rtc-hym8563 4-0051: no valid clock/calendar values available
[   13.471852@3] rtc-hym8563 4-0051: hctosys: unable to read the hardware clock
[   13.479298@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[   13.587655@3] dwc_otg: Core Release: 3.30a
[   13.588651@3] dwc_otg: Setting default values for core params
[   13.592818@3] dwc_otg: curmode: 0, host_only: 0
[   13.609467@3] dwc_otg: Using Buffer DMA mode
[   13.610458@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[   13.614354@3] dwc_otg: Working on port type = SLAVE
[   13.619208@3] dwc_otg: Dedicated Tx FIFOs mode
[   13.624649@3] input: adc_keypad as /devices/platform/adc_keypad/input/input4
[   13.631102@3] bl: chip type/name: (5-g12a)
[   13.634717@3] bl: key_valid: 0
[   13.637755@3] bl: aml_bl_config_load from dts
[   13.642090@3] bl: no backlight exist
[   13.645646@3] aml-bl: probe of backlight failed with error -1
[   13.651744@3] meson_cdev probe
[   13.654432@3] meson_cdev index: 0
[   13.657737@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[   13.666859@3] meson_cdev index: 1
[   13.670126@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-1 failed:-22
[   13.679206@3] meson_cdev index: 2
[   13.682471@3] cpucore_cooling_register, max_cpu_core_num:2
[   13.687996@3] meson_cdev index: 3
[   13.691230@3] cpucore_cooling_register, max_cpu_core_num:4
[   13.696778@3] meson_cdev index: 4
[   13.699993@3] meson_cdev index: 5
[   13.703297@3] find tzd id: 0
[   13.706211@3] find tzd id: 0
[   13.709057@3] find tzd id: 0
[   13.711863@3] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   13.718602@3] meson_cdev probe done
[   13.722084@3] gxbb_pm: enter meson_pm_probe!
[   13.726259@3] gxbb_pm: meson_pm_probe done
[   13.730704@3] ALSA device list:
[   13.733437@3]   #0: AML-AUGESOUND
[   13.738705@3] Freeing unused kernel memory: 5568K
[   13.875340@3] hub 1-1:1.0: USB hub found
[   13.876242@3] hub 1-1:1.0: 4 ports detected
[   13.978645@5] fb: osd[0] enable: 1 (sh)
[   15.005015@0] fb: osd[1] enable: 0 (sh)
[   16.098908@2] raid6: int64x1  gen()  1098 MB/s
[   16.166886@2] raid6: int64x1  xor()   996 MB/s
[   16.234900@2] raid6: int64x2  gen()  1748 MB/s
[   16.302895@3] raid6: int64x2  xor()  1321 MB/s
[   16.370904@4] raid6: int64x4  gen()  2263 MB/s
[   16.438899@3] raid6: int64x4  xor()  1573 MB/s
[   16.506912@2] raid6: int64x8  gen()  2280 MB/s
[   16.574893@2] raid6: int64x8  xor()  1570 MB/s
[   16.642890@2] raid6: neonx1   gen()  2720 MB/s
[   16.710886@2] raid6: neonx1   xor()  1641 MB/s
[   16.778895@2] raid6: neonx2   gen()  3224 MB/s
[   16.846902@5] raid6: neonx2   xor()  2464 MB/s
[   16.914887@3] raid6: neonx4   gen()  4021 MB/s
[   16.982898@5] raid6: neonx4   xor()  3166 MB/s
[   17.050880@5] raid6: neonx8   gen()  4593 MB/s
[   17.118879@5] raid6: neonx8   xor()  3406 MB/s
[   17.119537@5] raid6: using algorithm neonx8 gen() 4593 MB/s
[   17.123868@5] raid6: .... xor() 3406 MB/s, rmw enabled
[   17.128981@5] raid6: using intx1 recovery algorithm
[   17.134181@5] xor: measuring software checksum speed
[   17.174877@5]    8regs     :  7461.000 MB/sec
[   17.214877@5]    8regs_prefetch:  6277.000 MB/sec
[   17.254899@4]    32regs    :  8541.000 MB/sec
[   17.294876@4]    32regs_prefetch:  8350.000 MB/sec
[   17.295562@4] xor: using function: 32regs (8541.000 MB/sec)
[   17.327527@4] Btrfs loaded, crc32c=crc32c-generic, assert=on
[   17.328308@4] BTRFS: selftest: sectorsize: 4096  nodesize: 4096
[   17.334168@4] BTRFS: selftest: Running btrfs free space cache tests
[   17.340390@4] BTRFS: selftest: Running extent only tests
[   17.345679@4] BTRFS: selftest: Running bitmap only tests
[   17.350961@4] BTRFS: selftest: Running bitmap and extent tests
[   17.356774@4] BTRFS: selftest: Running space stealing from bitmap to extent
[   17.364013@4] BTRFS: selftest: Free space cache tests finished
[   17.369503@4] BTRFS: selftest: Running extent buffer operation tests
[   17.375826@4] BTRFS: selftest: Running btrfs_split_item tests
[   17.381567@4] BTRFS: selftest: Running extent I/O tests
[   17.386748@4] BTRFS: selftest: Running find delalloc tests
[   17.501462@4] BTRFS: selftest: Running extent buffer bitmap tests
[   17.553452@4] BTRFS: selftest: Extent I/O tests finished
[   17.554084@4] BTRFS: selftest: Running btrfs_get_extent tests
[   17.559545@4] BTRFS: selftest: Running hole first btrfs_get_extent test
[   17.566063@4] BTRFS: selftest: Running outstanding_extents tests
[   17.572048@4] BTRFS: selftest: Running qgroup tests
[   17.576871@4] BTRFS: selftest: Qgroup basic add
[   17.581406@4] BTRFS: selftest: Qgroup multiple refs test
[   17.586710@4] BTRFS: selftest: Running free space tree tests
[   17.613677@4] BTRFS: selftest: sectorsize: 4096  nodesize: 8192
[   17.614553@4] BTRFS: selftest: Running btrfs free space cache tests
[   17.620803@4] BTRFS: selftest: Running extent only tests
[   17.626096@4] BTRFS: selftest: Running bitmap only tests
[   17.631382@4] BTRFS: selftest: Running bitmap and extent tests
[   17.637192@4] BTRFS: selftest: Running space stealing from bitmap to extent
[   17.644433@4] BTRFS: selftest: Free space cache tests finished
[   17.649919@4] BTRFS: selftest: Running extent buffer operation tests
[   17.656244@4] BTRFS: selftest: Running btrfs_split_item tests
[   17.661975@4] BTRFS: selftest: Running extent I/O tests
[   17.667164@4] BTRFS: selftest: Running find delalloc tests
[   17.781743@4] BTRFS: selftest: Running extent buffer bitmap tests
[   17.833748@4] BTRFS: selftest: Extent I/O tests finished
[   17.834423@4] BTRFS: selftest: Running btrfs_get_extent tests
[   17.839886@4] BTRFS: selftest: Running hole first btrfs_get_extent test
[   17.846399@4] BTRFS: selftest: Running outstanding_extents tests
[   17.852385@4] BTRFS: selftest: Running qgroup tests
[   17.857208@4] BTRFS: selftest: Qgroup basic add
[   17.861745@4] BTRFS: selftest: Qgroup multiple refs test
[   17.867051@4] BTRFS: selftest: Running free space tree tests
[   17.894047@4] BTRFS: selftest: sectorsize: 4096  nodesize: 16384
[   17.895031@4] BTRFS: selftest: Running btrfs free space cache tests
[   17.901277@4] BTRFS: selftest: Running extent only tests
[   17.906564@4] BTRFS: selftest: Running bitmap only tests
[   17.911853@4] BTRFS: selftest: Running bitmap and extent tests
[   17.917662@4] BTRFS: selftest: Running space stealing from bitmap to extent
[   17.924904@4] BTRFS: selftest: Free space cache tests finished
[   17.930389@4] BTRFS: selftest: Running extent buffer operation tests
[   17.936714@4] BTRFS: selftest: Running btrfs_split_item tests
[   17.942446@4] BTRFS: selftest: Running extent I/O tests
[   17.947635@4] BTRFS: selftest: Running find delalloc tests
[   18.062452@4] BTRFS: selftest: Running extent buffer bitmap tests
[   18.114454@4] BTRFS: selftest: Extent I/O tests finished
[   18.115103@4] BTRFS: selftest: Running btrfs_get_extent tests
[   18.120566@4] BTRFS: selftest: Running hole first btrfs_get_extent test
[   18.127077@4] BTRFS: selftest: Running outstanding_extents tests
[   18.133063@4] BTRFS: selftest: Running qgroup tests
[   18.137890@4] BTRFS: selftest: Qgroup basic add
[   18.142424@4] BTRFS: selftest: Qgroup multiple refs test
[   18.147729@4] BTRFS: selftest: Running free space tree tests
[   18.174719@4] BTRFS: selftest: sectorsize: 4096  nodesize: 32768
[   18.175699@4] BTRFS: selftest: Running btrfs free space cache tests
[   18.181944@4] BTRFS: selftest: Running extent only tests
[   18.187236@4] BTRFS: selftest: Running bitmap only tests
[   18.192522@4] BTRFS: selftest: Running bitmap and extent tests
[   18.198332@4] BTRFS: selftest: Running space stealing from bitmap to extent
[   18.205572@4] BTRFS: selftest: Free space cache tests finished
[   18.211061@4] BTRFS: selftest: Running extent buffer operation tests
[   18.217385@4] BTRFS: selftest: Running btrfs_split_item tests
[   18.223117@4] BTRFS: selftest: Running extent I/O tests
[   18.228305@4] BTRFS: selftest: Running find delalloc tests
[   18.342999@4] BTRFS: selftest: Running extent buffer bitmap tests
[   18.394952@4] BTRFS: selftest: Extent I/O tests finished
[   18.395595@4] BTRFS: selftest: Running btrfs_get_extent tests
[   18.401063@4] BTRFS: selftest: Running hole first btrfs_get_extent test
[   18.407575@4] BTRFS: selftest: Running outstanding_extents tests
[   18.413564@4] BTRFS: selftest: Running qgroup tests
[   18.418387@4] BTRFS: selftest: Qgroup basic add
[   18.422922@4] BTRFS: selftest: Qgroup multiple refs test
[   18.428229@4] BTRFS: selftest: Running free space tree tests
[   18.455253@4] BTRFS: selftest: sectorsize: 4096  nodesize: 65536
[   18.456225@4] BTRFS: selftest: Running btrfs free space cache tests
[   18.462474@4] BTRFS: selftest: Running extent only tests
[   18.467764@4] BTRFS: selftest: Running bitmap only tests
[   18.473053@4] BTRFS: selftest: Running bitmap and extent tests
[   18.478861@4] BTRFS: selftest: Running space stealing from bitmap to extent
[   18.486102@4] BTRFS: selftest: Free space cache tests finished
[   18.491591@4] BTRFS: selftest: Running extent buffer operation tests
[   18.497916@4] BTRFS: selftest: Running btrfs_split_item tests
[   18.503650@4] BTRFS: selftest: Running extent I/O tests
[   18.508836@4] BTRFS: selftest: Running find delalloc tests
[   18.623646@4] BTRFS: selftest: Running extent buffer bitmap tests
[   18.675608@4] BTRFS: selftest: Extent I/O tests finished
[   18.676248@4] BTRFS: selftest: Running btrfs_get_extent tests
[   18.681717@4] BTRFS: selftest: Running hole first btrfs_get_extent test
[   18.688229@4] BTRFS: selftest: Running outstanding_extents tests
[   18.694215@4] BTRFS: selftest: Running qgroup tests
[   18.699037@4] BTRFS: selftest: Qgroup basic add
[   18.703575@4] BTRFS: selftest: Qgroup multiple refs test
[   18.708879@4] BTRFS: selftest: Running free space tree tests
[   24.167896@0] EXT4-fs (mmcblk0p6): 43 orphan inodes deleted
[   24.169481@0] EXT4-fs (mmcblk0p6): recovery complete
[   24.182263@0] EXT4-fs (mmcblk0p6): mounted filesystem with writeback data mode. Opts: data=writeback
[   24.374667@0] systemd[1]: System time before build time, advancing clock.
[   24.382427@0] cgroup: cgroup2: unknown option "nsdelegate"
[   24.391490@0] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   24.412977@2] systemd[1]: Detected architecture arm64.
[   24.426944@2] systemd[1]: Set hostname to <Khadas>.
[   24.463099@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[   24.598442@4] systemd[1]: Created slice system-modprobe.slice.
[   24.601225@4] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   24.607513@4] systemd[1]: Created slice User and Session Slice.
[   24.613162@4] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   24.621195@4] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   24.630521@4] systemd[1]: Reached target Remote File Systems.
[   24.636154@4] systemd[1]: Reached target Slices.
[   24.640750@4] systemd[1]: Reached target Swap.
[   24.645179@4] systemd[1]: Reached target System Time Set.
[   24.652022@4] systemd[1]: Listening on Syslog Socket.
[   24.655759@4] systemd[1]: Listening on fsck to fsckd communication Socket.
[   24.662573@4] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   24.669480@4] systemd[1]: Listening on Journal Audit Socket.
[   24.674939@4] systemd[1]: Listening on Journal Socket (/dev/log).
[   24.681073@4] systemd[1]: Listening on Journal Socket.
[   24.686141@4] systemd[1]: Listening on udev Control Socket.
[   24.691599@4] systemd[1]: Listening on udev Kernel Socket.
[   24.698575@4] systemd[1]: Mounting Huge Pages File System...
[   24.704456@4] systemd[1]: Mounting POSIX Message Queue File System...
[   24.710836@4] systemd[1]: Mounting Kernel Debug File System...
[   24.716592@4] systemd[1]: Mounting Kernel Trace File System...
[   24.722933@4] systemd[1]: Starting Journal Service...
[   24.727239@4] systemd[1]: Started Camera ISP 3A server service.
[   24.745633@4] systemd[1]: Starting Restore / save the current clock...
[   24.751020@4] systemd[1]: Starting Set the console keyboard layout...
[   24.759902@4] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   24.765781@4] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[   24.774501@4] systemd[1]: Started Nameserver information manager.
[   24.780512@4] systemd[1]: Reached target Network (Pre).
[   24.786201@3] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   24.793022@3] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   24.805490@3] systemd[1]: Starting Load Kernel Modules...
[   24.810862@3] systemd[1]: Starting Remount Root and Kernel File Systems...
[   24.817875@3] systemd[1]: Starting udev Coldplug all Devices...
[   24.824523@3] systemd[1]: Started Journal Service.
[   24.855510@3] EXT4-fs (mmcblk0p6): re-mounted. Opts: commit=600,errors=remount-ro
[   24.883192@5] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r)
[   24.886082@5] ======== dhd_wlan_init_plat_data ========
[   24.891303@5] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=98, oob_irq_flags=0x418
[   24.891304@5] dhd_wlan_init_gpio: WL_REG_ON=-1
[   24.891306@5] dhd_wifi_platform_load: Enter
[   24.891343@5] Power-up adapter 'DHD generic adapter'
[   24.891345@5] wifi_platform_set_power = 1
[   24.891346@5] ======== PULL WL_REG_ON(-1) HIGH! ========
[   24.891359@5] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
[   25.091372@5] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
[   25.318439@3] systemd-journald[2523]: Received client request to flush runtime journal.
[   25.598951@5] wifi_platform_bus_enumerate device present 1
[   25.599870@5] ======== Card detection to detect SDIO card! ========
[   25.608908@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   25.612512@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   25.620022@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   25.625512@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   25.633749@3] amlvideo2.0 cma memory is cfc00000 , size is  1800000
[   25.636837@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   25.636840@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   25.638400@5] amlvideo2.1 cma memory is d1400000 , size is  1800000
[   25.639471@5] meson-mmc: actual_clock :0, HHI_nand: 0x80
[   25.639473@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   25.639789@5] amlvideo2.1 cma memory release succeed
[   25.659447@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[   25.659449@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   25.687879@3] out of value, fixed it
[   25.687899@3] id=0 set inskew=0
[   25.688058@3] AED req_sel0 module:TDMOUT_B
[   25.692691@4] mali ffe40000.bifrost: Continuing without Mali regulator control
[   25.692767@4] mali ffe40000.bifrost: max pp is 2
[   25.692769@4] mali ffe40000.bifrost: set min pp to default 1
[   25.692771@4] mali ffe40000.bifrost: min pp is 1
[   25.692773@4] mali ffe40000.bifrost: set min clk default to 0
[   25.692774@4] mali ffe40000.bifrost: min clk  is 0
[   25.692786@4] mali ffe40000.bifrost: hiu io source  0xffffff8010a14000
[   25.692790@4] mali ffe40000.bifrost: hiu io source  0xffffff8010a16000
[   25.692792@4] mali ffe40000.bifrost: num of pp used most of time 1
[   25.692795@4] mali ffe40000.bifrost: clock dvfs cfg table size is 6
[   25.692814@4] mali ffe40000.bifrost: max clk set 4
[   25.692815@4] mali ffe40000.bifrost: max clk  is 4
[   25.692817@4] mali ffe40000.bifrost: turbo clk set to 5
[   25.692818@4] mali ffe40000.bifrost: turbo clk  is 5
[   25.692820@4] mali ffe40000.bifrost: default clk set to 4
[   25.692821@4] mali ffe40000.bifrost: default clk  is 4
[   25.692825@4] mali ffe40000.bifrost: ====================0====================
[   25.692825@4] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[   25.692827@4] mali ffe40000.bifrost: ====================1====================
[   25.692827@4] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[   25.692830@4] mali ffe40000.bifrost: ====================2====================
[   25.692830@4] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[   25.692832@4] mali ffe40000.bifrost: ====================3====================
[   25.692832@4] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[   25.692834@4] mali ffe40000.bifrost: ====================4====================
[   25.692834@4] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[   25.692836@4] mali ffe40000.bifrost: ====================5====================
[   25.692836@4] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[   25.692838@4] mali ffe40000.bifrost: clock dvfs table size is 6
[   25.692921@4] mali_plat=ffffff80022e4620
[   25.693116@4] find tzd id: 0
[   25.693155@4] gpu cooling register okay with err=0
[   25.693262@4] find tzd id: 0
[   25.693272@4] gpu core cooling register okay with err=0
[   25.693295@4] shader_present=3, tiler_present=1, l2_present=1
[   25.693379@4] Mali_pwr_on:gpu_irq : 200
[   25.693566@4] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
[   25.695617@4] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
[   25.703943@2] mali ffe40000.bifrost: Probed as mali0
[   25.742159@5] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   25.752279@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   25.755113@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   25.765439@5] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   25.774649@5] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[   25.784407@5] sdio: queuing unknown CIS tuple 0x8e (9 bytes)
[   25.891314@5] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   25.891316@5] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   25.891318@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   25.891320@5] meson-mmc: Data 1 aligned delay is 0
[   25.891323@5] meson-mmc: sdio: clk 199999997 tuning start
[   25.891350@5] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   25.892184@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   25.893005@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.893828@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.894649@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.894650@5] meson-mmc: [prev_map] fixed_adj_win_map:30
[   25.894651@5] meson-mmc: [0]=0
[   25.894652@5] meson-mmc: [1]=1
[   25.894653@5] meson-mmc: [2]=1
[   25.894654@5] meson-mmc: [3]=1
[   25.894655@5] meson-mmc: [4]=1
[   25.894656@5] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[   25.894658@5] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[   25.894679@5] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   25.895504@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   25.896326@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.897146@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.898002@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.898003@5] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[   25.898005@5] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[   25.898027@5] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   25.898865@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   25.899713@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.900532@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.901352@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.901353@5] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[   25.901355@5] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[   25.902175@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   25.903003@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   25.903864@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.904703@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.905524@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.905525@5] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[   25.905527@5] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[   25.906346@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   25.907298@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   25.908162@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.908979@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.909802@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.909803@5] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[   25.909805@5] meson-mmc: step:20, delay1:0x14514514, delay2:0x14014514
[   25.910660@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   25.911496@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   25.912316@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.913136@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.913956@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.913957@5] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[   25.913959@5] meson-mmc: step:24, delay1:0x18618618, delay2:0x18018618
[   25.914793@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   25.914816@5] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   25.915732@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   25.916552@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   25.917370@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   25.917372@5] meson-mmc: [>>>>>>>>bitmap_xor_dst] fixed_adj_win_map:2
[   25.917373@5] meson-mmc: [0]=0
[   25.917373@5] meson-mmc: [1]=1
[   25.917374@5] meson-mmc: [2]=0
[   25.917375@5] meson-mmc: [3]=0
[   25.917375@5] meson-mmc: [4]=0
[   25.917377@5] meson-mmc: [_find_fixed_adj_valid_win] fir_adj:1
[   25.917378@5] meson-mmc: [>>>>>>>>prev_map_range] fixed_adj_win_map:495
[   25.917379@5] meson-mmc: [1]=1
[   25.917379@5] meson-mmc: [2]=1
[   25.917380@5] meson-mmc: [3]=1
[   25.917381@5] meson-mmc: [4]=1
[   25.917381@5] meson-mmc: [0]=0
[   25.917383@5] meson-mmc: left:3, right:0, mid:4, size:4
[   25.917384@5] meson-mmc: step:0, delay1:0x0, delay2:0x0
[   25.917386@5] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[   25.917388@5] meson-mmc: delay1:0x0, delay2:0x0
[   25.920886@5] sdio: new ultra high speed SDR104 SDIO card at address 0001
[   25.921105@3] sdio: clock 199999997, 4-bit-bus-width
[   25.921105@3]  
[   25.921105@3] meson-mmc: [sdio_reinit] finish
[   25.937343@3] bcmsdh_register: register client driver
[   25.937450@3] bcmsdh_sdmmc_probe: Enter num=1
[   25.937516@3] bcmsdh_sdmmc_probe: Enter num=2
[   25.937518@3] bus num (host idx)=2, slot num (rca)=1
[   25.937520@3] found adapter info 'DHD generic adapter'
[   25.937523@3] Wifi: bcmdhd_mem_prealloc: sectoin 3, size 139264
[   25.937542@3] alloc static buf at ffffffc09a980000!
[   25.937543@3] Wifi: bcmdhd_mem_prealloc: sectoin 4, size 0
[   25.937592@3] sdioh_attach: set sd_f2_blocksize 256
[   25.937637@3] sdioh_attach: sd clock rate = 0
[   25.937964@3] dhdsdio_probe : no mutex held. set lock
[   25.938066@3] F1 signature read @0x18000000=0x17294359
[   25.941540@3] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[   25.942103@3] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[   25.942155@3] Wifi: bcmdhd_mem_prealloc: sectoin 7, size 30432
[   25.942167@3] dhd_conf_set_chiprev: chip=0x4359, chiprev=9
[   25.942203@3] Wifi: bcmdhd_mem_prealloc: sectoin 0, size 10320
[   25.942223@3] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
[   25.942438@3] Wifi: bcmdhd_mem_prealloc: sectoin 5, size 65536
[   25.942576@3] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
[   25.942645@3] wl_escan_attach: Enter
[   25.942647@3] Wifi: bcmdhd_mem_prealloc: sectoin 19, size 67488
[   25.942665@3] wl_escan_init: Enter
[   25.942760@3] wl_create_event_handler(): thread:wl_escan_handler:acb started
[   25.942764@3] Wifi: bcmdhd_mem_prealloc: sectoin 20, size 65536
[   25.942775@3] Wifi: bcmdhd_mem_prealloc: sectoin 21, size 65536
[   25.942784@0] tsk Enter, tsk = 0xffffffc09a9f0198
[   25.942786@3] Wifi: bcmdhd_mem_prealloc: sectoin 22, size 65536
[   25.942795@3] Wifi: bcmdhd_mem_prealloc: sectoin 23, size 65536
[   25.942850@3] dhd_attach(): thread:dhd_watchdog_thread:acc started
[   25.942944@1] dhd_attach(): thread:dhd_dpc:acd started
[   25.943022@3] dhd_attach(): thread:dhd_rxf:ace started
[   25.943027@3] dhd_deferred_work_init: work queue initialized
[   25.943030@3] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[   25.943038@3] Wifi: bcmdhd_mem_prealloc: sectoin 1, size 10300
[   25.943040@3] Wifi: bcmdhd_mem_prealloc: sectoin 2, size 65536
[   25.943052@3] dhd_bus_set_default_min_res_mask: Unhandled chip id
[   25.943276@3] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[   25.955191@2] Dongle Host Driver, version 1.579.77.41.10 (r)
[   25.955505@2] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
[   25.955508@2] Register interface [wlan0]  MAC: 10:2c:6b:cb:f5:ad
[   25.955508@2] 
[   25.955544@2] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0
[   25.955549@2] dhd_wl_ioctl: returning as busstate=0
[   25.955552@2] dhd_dbg_detach_pkt_monitor, 2204
[   25.955554@2] dhd_bus_devreset: == Power OFF ==
[   25.955811@5] bcmsdh_oob_intr_unregister: Enter
[   25.955812@5] bcmsdh_oob_intr_unregister: irq is not registered
[   25.955816@5] dhd_txglom_enable: enable 0
[   25.955818@5] dhd_conf_set_txglom_params: txglom_mode=copy
[   25.955819@5] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
[   25.955820@5] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
[   25.955822@5] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[   25.955823@5] dhd_bus_devreset:  WLAN OFF DONE
[   25.955871@5] wifi_platform_set_power = 0
[   25.955873@5] ======== PULL WL_REG_ON(-1) LOW! ========
[   25.955883@5] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
[   26.155903@5] dhdsdio_probe : the lock is released.
[   26.155969@5] dhd_module_init: Exit err=0
[   26.160263@3] No find node.
[   26.160267@3] register clk_set_setting cpu[46]
[   26.162857@5] Registered firmware driver success.
[   26.163336@5] Try to load video/h264_enc.bin  ...
[   26.164694@3] load firmware size : 76288, Name : video/h264_enc.bin.
[   26.164707@3] the fw pack ver v0.0 is too lower.
[   26.164708@3] it may work abnormally so need to be update in time.
[   26.165063@3] Try to load video/video_ucode.bin  ...
[   26.165608@5] dhd_ioctl_entry: Interface is down 
[   26.177344@5] load firmware size : 1706240, Name : video/video_ucode.bin.
[   26.177464@5] the fw pack ver v0.2 is too lower.
[   26.177466@5] it may work abnormally so need to be update in time.
[   26.194332@5] Amlogic A/V streaming port init
[   26.198115@2] get gate demux control ok ffffffc099b085c0
[   26.198124@2] get gate parser_top control ok ffffffc099b08640
[   26.198143@2] get gate vdec control ok ffffffc099b086c0
[   26.198147@2] get gate clk_81 control failed           (null)
[   26.198169@2] get gate clk_vdec_mux control ok ffffffc099b08740
[   26.198195@2] get gate clk_hcodec_mux control ok ffffffc099b087c0
[   26.198223@2] get gate clk_hevc_mux control ok ffffffc099b08840
[   26.198255@2] get gate clk_hevcb_mux control ok ffffffc099b088c0
[   26.198270@2] get gate ahbarb0 control ok ffffffc099b08940
[   26.198272@2] get gate asyncfifo control failed           (null)
[   26.209863@3] ammvdec_h264 module init
[   26.224974@3] ammvdec_mpeg12 module init
[   26.229011@3] ammvdec_mpeg4_driver_init_module 
[   26.244569@3] amvenc_avc_probe -- reserved memory config fail.
[   26.244571@3] amvenc_avc - cma memory pool size: 60 MB
[   26.244589@3] encode_wq_init.
[   26.244592@3] encode start monitor.
[   26.244671@3] encode workqueue monitor start.
[   26.247346@3] vpu_init
[   26.247502@3] vpu_probe
[   26.247504@3] HevcEnc reserved memory config fail.
[   26.247506@3] HevcEnc - cma memory pool size: 64 MB
[   26.247524@3] HevcEnc - wave420l_irq: 48
[   26.247574@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff801139c000
[   26.247677@3] success to probe vpu device with video memory from cma
[   26.260395@3] npu_version: 2
[   26.260558@3] Galcore version 6.4.6.2.5.3.2
[   26.276204@3] acamera_soc_lens_init@soc_lens.c:221 GENERIC(INFO) :Lens subdevice init
[   26.276518@3] soc_lens_probe@soc_lens.c:193 GENERIC(INFO) :register v4l2 lens device. result 0, sd 0x2a24480 sd->dev 0x999a4410
[   26.283338@3] acamera_camera_sensor_init@soc_sensor.c:564 GENERIC(ERR) :Sensor subdevice init
[   26.297874@3] fw_module_init@main_kernel_juno_v4l2.c:772 GENERIC(ERR) :Juno isp fw_module_init
[   26.297875@3] 
[   26.952459@4] amlvideo2.0 cma memory release succeed

zfuwen · January 4, 2023, 3:38am

拆掉SSD后，能正常启动。

为什么会出现这种情况？？

zfuwen · January 4, 2023, 3:44am

之前还出现过，接了SSD启动会启动不起来，是否都是相同的问题？？
这个是否有办法修正啊，项目上必须要使用SSD电子盘做存储数据。

numbqq · January 4, 2023, 3:51am

接上SSD必现？SSD什么型号的？所有的板子都是这样？

如何重现？最好能提供下具体的重现方法。

zfuwen · January 4, 2023, 4:00am

重新接上SSD后又会重现，重新烧写系统、重新格式化SSD又能正常启动。

zfuwen · January 4, 2023, 4:02am

重启启动不起来的不是必现，同一台机，不定期执行reboot重启，会有概率出现设备连不上没反应。

zfuwen · January 4, 2023, 4:04am

SSD是海康的2T版本。

一共出了60台，客户当前在使用的只有16台左右，这二台是16台中的其中二台出现这种情况。

发出去之前是老化测试了24小时，一直正常的。

zfuwen · January 4, 2023, 4:05am

在不换主板的情况下，拆掉SSD一定能正常启动，接下SSD一定会报上面的错误，更详细的日志信息我发了企业微信交流群里。

zfuwen · January 4, 2023, 4:06am

拆了SSD，串口登录后会报以下错误信息：

Ubuntu 20.04.3 LTS Khadas ttyS0

Khadas login: root
Password: 
run-parts: failed to exec /etc/update-motd.d/00-header: Exec format error
run-parts: /etc/update-motd.d/00-header exited with return code 1
run-parts: failed to exec /etc/update-motd.d/10-help-text: Exec format error
run-parts: /etc/update-motd.d/10-help-text exited with return code 1
run-parts: failed to exec /etc/update-motd.d/50-motd-news: Exec format error
run-parts: /etc/update-motd.d/50-motd-news exited with return code 1
Last login: Thu Dec 22 18:19:39 CST 2022 on ttyS0

zfuwen · January 4, 2023, 5:07am

Starting kernel ...

uboot time: 5409429 us
[    0.366112@4] codec_mm_module_init
[    0.372825@4] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.545242@4] dmi: Firmware registration failed.
[    0.549084@4] lcd: error: failed to get null
[    0.549105@4] lcd: error: Out of clock range, reset to default setting
[    0.549181@4] lcd: error: lcd_debug_info_if is null
[    0.644890@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    0.821046@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    0.997203@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.173359@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.349512@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.525666@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.701819@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.877966@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    2.054119@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    2.230274@4] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    2.324744@4] amlogic-pcie-v2 fc000000.pcieA: phy link never came up
[    2.324927@4] amlogic-pcie-v2 fc000000.pcieA: link timeout, disable PCIE PLL
[    2.324942@4] amlogic-pcie-v2 fc000000.pcieA: power down pcie phy
[    2.528627@4] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.549944@4] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[    2.551715@4] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[    2.553612@4] ff803000.serial: clock gate not found
[    2.690936@4] amlogic-new-usb3-v2 ffe09080.usb3phy: This phy has no usb port
[    2.701036@4] meson-remote ff808040.rc: don't find the node <led_blink>
[    2.703366@4] meson-remote ff808040.rc: don't find the node <led_blink_frq>
[    2.710919@4] efuse efuse:  open efuse clk gate error!!
[    2.743545@4] meson-fb meson-fb: create ion_client ffffffc09aeb3240, handle=ffffffc099e57180
[    2.743548@4] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
[    7.902657@1] di_get_vpu_clkb: get clk vpu error.
[    7.903897@1] get fclk_div5 err
[    7.904859@1] vdin_drv_probe: vdin cannot get msr clk !!!
[    7.910774@1] get fclk_div5 err
[    7.913367@1] vdin_drv_probe: vdin cannot get msr clk !!!
[    7.922369@0] amlvideo2 probe called
[    7.922629@0] amlvideo2 probe called
[    7.926302@2] Reserved memory: failed to init DMA memory pool at 0x00000000e3000000, size 0 MiB
[    7.937643@2] meson-mmc: >>>>>>>>hostbase ffffff8008a03000, dmode 
[    7.991889@0] meson-mmc: >>>>>>>>hostbase ffffff8008a8d000, dmode 
[    8.033428@0] meson-mmc: >>>>>>>>hostbase ffffff8008b17000, dmode 
[    8.037490@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    8.045243@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    8.048453@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    8.073769@1] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
[    8.073769@1] 
[    8.078925@1] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
[    8.084801@1] cectx ff80023c.aocec: cecb_ver:0x1
[    8.089320@1] cectx ff80023c.aocec: line_reg:0x1
[    8.093919@1] cectx ff80023c.aocec: line_bit:0x3
[    8.098502@1] cectx ff80023c.aocec: ee_to_ao:0x1
[    8.103407@1] cectx ff80023c.aocec: not find 'port_num'
[    8.108331@2] cectx ff80023c.aocec: using cec:1
[    8.112836@2] cectx ff80023c.aocec: no hdmirx regs
[    8.117554@2] cectx ff80023c.aocec: no hhi regs
[    8.122073@2] cectx ff80023c.aocec: not find 'output'
[    8.128539@2] cectx ff80023c.aocec: irq cnt:2
[    8.131545@2] cectx ff80023c.aocec: wakeup_reason:0x0
[    8.136509@2] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[    8.142001@2] cectx ff80023c.aocec: aml_cec_probe success end
[    8.596525@0] defendkey ff630218.defendkey: Reserved memory is not enough!
[    8.611295@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    8.613405@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
[    8.620814@2] aml_dai_tdm_probe, failed add snd tdm controls
[    8.988641@1] edt_ft5x06 3-0038: touchscreen probe failed
[    8.994418@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    8.996237@0] usb usb2: Unsupported the hub
[    9.002438@1] rtc-hym8563 4-0051: hctosys: unable to read the hardware clock
[    9.122561@2] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    9.126102@2] thermal thermal_zone0: binding zonSELinux:  Could not open policy file <= /etc/selinux/targeted/policy/policy.32:  No such file or directory
[   19.076869@0] cgroup: cgroup2: unknown option "nsdelegate"
[   19.819837@4] out of value, fixed it
[   20.213601@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   20.214574@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   20.222011@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   20.227574@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   20.238490@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff
[   20.240572@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7
[   20.446180@4] meson-mmc: Tuning transfer error: nmatch=2 tuning_err:0xffffffac
[   20.450338@2] meson-fb meson-fb: create ion_client ffffffc09aeb3240, handle=ffffffc07ed10840
[   20.456266@2] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ea400000, size 1 MiB
[   20.700566@4] No find node.
[   20.736666@4] Amlogic A/V streaming port init
[   20.817802@2] iq name from dts config is ----> os08a10
[   20.827375@2] config sensor os08a10 driver.
[   20.829835@2] pwr_enable: get_named_gpio power-enable fail
[   20.831378@2] set power fail
[   20.845890@2] arm_sensor_i2c_probe: start to probe
[   20.846177@2] system_i2c_init:success to add i2c driver
[   20.850426@2] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.857115@2] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.863735@2] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.893103@2] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.894288@2] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.900991@2] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   21.470408@2] meson-fb meson-fb: create ion_client ffffffc09aeb3240, handle=ffffffc07ec8b840
[   21.473233@2] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ea500000, size 1 MiB
[   22.497237@2] meson-fb meson-fb: create ion_client ffffffc09aeb3240, handle=ffffffc07ec8b980
[   22.500024@2] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ea600000, size 8 MiB
[  109.645208@1] meson-remote ff808040.rc: remote_ioctl invalid user space pointer
[  109.782998@5] out of value, fixed it
[  111.510711@2] meson-mmc: Tuning transfer error: nmatch=13 tuning_err:0xffffffac
[  111.827615@0] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23

为什么22秒到109秒之前等待那么久？？？

zfuwen · January 4, 2023, 5:09am

[   20.872505] camera_ioctl@soc_sensor.c:430 GENERIC(ERR) :get isp_seq_num = 0

[   20.872514] sensor_print_params@V4L2_drv.c:63 GENERIC(ERR) :SOC SENSOR PARAMETERS
[   20.872519] sensor_print_params@V4L2_drv.c:64 GENERIC(ERR) :pixels_per_line: 0
[   20.872524] sensor_print_params@V4L2_drv.c:65 GENERIC(ERR) :again_log2_max: 2097152
[   20.872529] sensor_print_params@V4L2_drv.c:66 GENERIC(ERR) :dgain_log2_max: 0
[   20.872533] sensor_print_params@V4L2_drv.c:67 GENERIC(ERR) :again_accuracy: 0
[   20.872538] sensor_print_params@V4L2_drv.c:68 GENERIC(ERR) :integration_time_min: 0
[   20.872542] sensor_print_params@V4L2_drv.c:69 GENERIC(ERR) :integration_time_max: 0
[   20.872547] sensor_print_params@V4L2_drv.c:70 GENERIC(ERR) :integration_time_long_max: 0
[   20.872551] sensor_print_params@V4L2_drv.c:71 GENERIC(ERR) :integration_time_limit: 0
[   20.872556] sensor_print_params@V4L2_drv.c:72 GENERIC(ERR) :day_light_integration_time_max: 0
[   20.872560] sensor_print_params@V4L2_drv.c:73 GENERIC(ERR) :integration_time_apply_delay: 2
[   20.872565] sensor_print_params@V4L2_drv.c:74 GENERIC(ERR) :isp_exposure_channel_delay: 0
[   20.872569] sensor_print_params@V4L2_drv.c:75 GENERIC(ERR) :xoffset: 0
[   20.872574] sensor_print_params@V4L2_drv.c:76 GENERIC(ERR) :yoffset: 0
[   20.872578] sensor_print_params@V4L2_drv.c:77 GENERIC(ERR) :lines_per_second: 0
[   20.872583] sensor_print_params@V4L2_drv.c:78 GENERIC(ERR) :sensor_exp_number: 1
[   20.872587] sensor_print_params@V4L2_drv.c:79 GENERIC(ERR) :modes_num: 6
[   20.872592] sensor_print_params@V4L2_drv.c:80 GENERIC(ERR) :mode: 0
[   20.872596] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 0
[   20.872601] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.872605] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1280
[   20.872610] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 720
[   20.872614] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    1280
[   20.872618] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    1
[   20.872623] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 1
[   20.872627] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.872632] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1920
[   20.872636] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 1080
[   20.872640] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    7680
[   20.872645] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    1
[   20.872649] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 2
[   20.872654] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.872658] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1920
[   20.872662] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 1080
[   20.872667] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    15360
[   20.872671] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.872676] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 3
[   20.872680] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.872684] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  3840
[   20.872689] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 2160
[   20.872693] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    7680
[   20.872698] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.872702] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 4
[   20.872706] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.872711] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  3840
[   20.872715] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 2160
[   20.872720] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    15360
[   20.872724] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.872729] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 5
[   20.872733] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   2
[   20.872737] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1920
[   20.872742] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 1080
[   20.872746] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    15360
[   20.872751] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.893103] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.894158] i2c_io_read_sample@acamera_sbus_i2c.c:98 GENERIC(ERR) :I2C not ok
[   20.894288] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.900856] i2c_io_read_sample@acamera_sbus_i2c.c:98 GENERIC(ERR) :I2C not ok
[   20.900991] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.907522] i2c_io_read_sample@acamera_sbus_i2c.c:98 GENERIC(ERR) :I2C not ok
[   20.907527] sensor_get_id@OV08a10_drv.c:366 GENERIC(ERR) :sensor_get_id: Failed to read sensor id

[   20.907533] camera_ioctl@soc_sensor.c:430 GENERIC(ERR) :get isp_seq_num = 0

[   20.907539] sensor_print_params@V4L2_drv.c:63 GENERIC(ERR) :SOC SENSOR PARAMETERS
[   20.907543] sensor_print_params@V4L2_drv.c:64 GENERIC(ERR) :pixels_per_line: 0
[   20.907548] sensor_print_params@V4L2_drv.c:65 GENERIC(ERR) :again_log2_max: 2097152
[   20.907553] sensor_print_params@V4L2_drv.c:66 GENERIC(ERR) :dgain_log2_max: 0
[   20.907557] sensor_print_params@V4L2_drv.c:67 GENERIC(ERR) :again_accuracy: 0
[   20.907562] sensor_print_params@V4L2_drv.c:68 GENERIC(ERR) :integration_time_min: 0
[   20.907566] sensor_print_params@V4L2_drv.c:69 GENERIC(ERR) :integration_time_max: 0
[   20.907571] sensor_print_params@V4L2_drv.c:70 GENERIC(ERR) :integration_time_long_max: 0
[   20.907575] sensor_print_params@V4L2_drv.c:71 GENERIC(ERR) :integration_time_limit: 0
[   20.907580] sensor_print_params@V4L2_drv.c:72 GENERIC(ERR) :day_light_integration_time_max: 0
[   20.907584] sensor_print_params@V4L2_drv.c:73 GENERIC(ERR) :integration_time_apply_delay: 2
[   20.907589] sensor_print_params@V4L2_drv.c:74 GENERIC(ERR) :isp_exposure_channel_delay: 0
[   20.907593] sensor_print_params@V4L2_drv.c:75 GENERIC(ERR) :xoffset: 0
[   20.907598] sensor_print_params@V4L2_drv.c:76 GENERIC(ERR) :yoffset: 0
[   20.907602] sensor_print_params@V4L2_drv.c:77 GENERIC(ERR) :lines_per_second: 0
[   20.907607] sensor_print_params@V4L2_drv.c:78 GENERIC(ERR) :sensor_exp_number: 1
[   20.907611] sensor_print_params@V4L2_drv.c:79 GENERIC(ERR) :modes_num: 6
[   20.907615] sensor_print_params@V4L2_drv.c:80 GENERIC(ERR) :mode: 0
[   20.907620] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 0
[   20.907624] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.907629] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1280
[   20.907633] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 720
[   20.907638] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    1280
[   20.907642] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    1
[   20.907647] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 1
[   20.907651] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.907655] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1920
[   20.907660] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 1080
[   20.907664] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    7680
[   20.907669] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    1
[   20.907673] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 2
[   20.907678] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.907682] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1920
[   20.907687] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 1080
[   20.907691] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    15360
[   20.907696] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.907700] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 3
[   20.907704] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.907709] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  3840
[   20.907713] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 2160
[   20.907718] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    7680
[   20.907722] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.907727] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 4
[   20.907731] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   0
[   20.907736] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  3840
[   20.907740] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 2160
[   20.907745] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    15360
[   20.907749] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.907754] sensor_print_params@V4L2_drv.c:83 GENERIC(ERR) :preset 5
[   20.907758] sensor_print_params@V4L2_drv.c:84 GENERIC(ERR) :    mode:   2
[   20.907763] sensor_print_params@V4L2_drv.c:85 GENERIC(ERR) :    width:  1920
[   20.907767] sensor_print_params@V4L2_drv.c:86 GENERIC(ERR) :    height: 1080
[   20.907771] sensor_print_params@V4L2_drv.c:87 GENERIC(ERR) :    fps:    15360
[   20.907776] sensor_print_params@V4L2_drv.c:88 GENERIC(ERR) :    exp:    2
[   20.907783] acamera_camera_v4l2_get_subdev_by_name@main_kernel_juno_v4l2.c:104 GENERIC(ERR) :Requested a pointer to the subdev with a name SocCalibrations
[   20.907789] acamera_camera_v4l2_get_subdev_by_name@main_kernel_juno_v4l2.c:111 GENERIC(ERR) :Return subdev pointer 0x2a7c400
[   20.907803] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:39

[   20.907808] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:40

[   20.907814] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:43

[   20.907819] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:44

[   20.907824] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:45

[   20.907831] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:74

[   20.907836] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:75

[   20.907843] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:104

[   20.907848] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:105

[   20.907853] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:107

[   20.907880] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:39

[   20.907885] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:39

[   20.907891] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:40

[   20.907895] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:40

[   20.907901] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:43

[   20.907906] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:43

[   20.907910] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:44

[   20.907915] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:44

[   20.907920] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:45

[   20.907925] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:45

[   20.907939] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:74

[   20.907944] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:74

[   20.907949] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:75

[   20.907954] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:75

[   20.907965] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:104

[   20.907970] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:104

[   20.907975] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:105

[   20.907980] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:105

[   20.907985] iq_ioctl@soc_iq.c:97 SUBDEV_IQ(CRIT) :Unitialialized calibration at ctx:0 id:107

[   20.907990] iq_ioctl@soc_iq.c:129 SUBDEV_IQ(CRIT) :Uninitialized calibration at ctx:0 id:107

[   20.907999] get_calibrations_v4l2@acamera_get_calibrations_v4l2.c:31 GENERIC(CRIT) :Request calibration ctx_id:0 sensor_arg:0x22ede28 from soc_iq device ret 0
[   20.909199] general_set_wdr_mode@general_func.c:453 GENERAL(CRIT) :Setting Linear Binary Sequence

[   20.909435] sbuf_mgr_alloc_sbuf@sbuf_func.c:175 SBUF(CRIT) :sbuf: len_needed: 234096, len_alloc: 241663, len_used: 237568, page_size: 4096, buf_alloc: ffffffc088000000, buf_used: ffffffc088000000.
[   20.909446] sbuf_calibration_init@sbuf_func.c:452 SBUF(ERR) :sbuf_calibration_init.
[   20.909451] get_cur_calibration_total_size@sbuf_func.c:310 SBUF(ERR) :fw_instance: ffffff80022e3960, CALIBRATION_TOTAL_SIZE: 123.
[   20.909460] get_cur_calibration_total_size@sbuf_func.c:325 SBUF(ERR) :Total size for all IQ LUTs is 24852 bytes
[   20.909465] sbuf_mgr_item_count_in_using@sbuf_func.c:427 SBUF(ERR) :sbuf item using total count: 0.
[   20.909470] update_cur_calibration_to_sbuf@sbuf_func.c:362 SBUF(ERR) :sbuf_cali_base: ffffffc08800009d, p_sbuf_lut_arr: ffffffc08800009d, p_sbuf_cali_data: ffffffc08800084d
[   20.909485] sbuf_calibration_init@sbuf_func.c:493 SBUF(CRIT) :sbuf_calibration wdr_mode updated: 65535 -> 0.
[   20.909495] dma_writer_init@dma_writer.c:155 DMA_WRITER(ERR) :DMA_WRITER: Failed to initialize a dma writer type:0 output. 0x0 
[   20.909502] dma_writer_init@dma_writer.c:155 DMA_WRITER(ERR) :DMA_WRITER: Failed to initialize a dma writer type:1 output. 0x0 
[   20.909510] acamera_camera_v4l2_get_subdev_by_name@main_kernel_juno_v4l2.c:104 GENERIC(ERR) :Requested a pointer to the subdev with a name SocLens
[   20.909516] acamera_camera_v4l2_get_subdev_by_name@main_kernel_juno_v4l2.c:111 GENERIC(ERR) :Return subdev pointer 0x2ace480
[   20.909522] acamera_camera_v4l2_get_subdev_by_name@main_kernel_juno_v4l2.c:104 GENERIC(ERR) :Requested a pointer to the subdev with a name SocLens
[   20.909528] acamera_camera_v4l2_get_subdev_by_name@main_kernel_juno_v4l2.c:111 GENERIC(ERR) :Return subdev pointer 0x2ace480
[   20.909536] lens_init@lens_init.c:139 GENERIC(NOTICE) :Lens VCM driver is NULL
[   20.909541] soc_lens_init@soc_lens.c:62 GENERIC(INFO) :Lens has been initialized for ctx:0

[   20.909547] soc_lens_init@soc_lens.c:68 GENERIC(INFO) :Lens has been initialized
[   20.909553] lens_print_params@v4l2_vcm.c:57 GENERIC(ERR) :SOC SENSOR PARAMETERS
[   20.909558] lens_print_params@v4l2_vcm.c:58 GENERIC(ERR) :lens_type: 10
[   20.909562] lens_print_params@v4l2_vcm.c:59 GENERIC(ERR) :min_step: 64
[   20.909568] lens_print_params@v4l2_vcm.c:60 GENERIC(ERR) :next_zoom: 0
[   20.909572] lens_print_params@v4l2_vcm.c:61 GENERIC(ERR) :curr_zoom: 0
[   20.909577] lens_print_params@v4l2_vcm.c:62 GENERIC(ERR) :next_pos: 0
[   20.910758] acamera_init_context_seq@acamera_fw.c:292 GENERIC(ERR) :load isp context sequence[0]

[   20.914131] isp_fw_process@main_firmware.c:120 GENERIC(CRIT) :isp_fw_process start
[   20.914235] isp_v4l2_create_instance@isp-v4l2.c:780 GENERIC(CRIT) :V4L2 capture device registered as video0.
[   20.914250] soc_sensor_probe@soc_sensor.c:530 GENERIC(ERR) :register v4l2 sensor device. result 0, sd 0x2b12d98 sd->dev 0x9b28c410
[   20.914358] connection_thread@main_firmware.c:102 GENERIC(CRIT) :connection_thread start
[   20.920105] isp_v4l2_stream_try_format@isp-v4l2-stream.c:1326 GENERIC(CRIT) :[Stream#0] format 0x00000000 is not supported, setting default format 0x34424752.

[   20.920330] fw_intf_stream_stop@fw-interface.c:331 GENERIC(CRIT) :Stream off 4

[   21.469498] fb: malloc_osd_memory, cma:ffffff800ad210d8
[   21.469504] fb: malloc_osd_memory, 1232, base:0x000000007f800000, size:8388608
[   21.469506] fb: use ion buffer for fb memory, fb_index=2
[   21.469509] fb: OSD2 as afbcd mode,afbc_type=2
[   21.470408] meson-fb meson-fb: create ion_client ffffffc09aeb3240, handle=ffffffc07ec8b840
[   21.473233] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ea500000, size 1 MiB
[   21.481632] fb:  2, phy: 0x00000000ea500000, vir:0xffffff8011e67000, size=1024K

[   21.481634] fb: Frame buffer memory assigned at
[   21.481636] fb:  2, phy: 0x00000000ea500000, vir:0xffffff8011e67000, size=1024K

[   21.481639] fb:  2, phy: 0x00000000ea500000, vir:0xffffff8011e67000, size=1024K

[   21.481641] fb: logo_index=0,fb_index=2
[   21.481643] fb: ---------------clear fb2 memory ffffff8011e67000
[   21.481807] fb: osd[2] canvas.idx =0x41
[   21.481809] fb: osd[2] canvas.addr=0xea500000
[   21.481810] fb: osd[2] canvas.width=128
[   21.481812] fb: osd[2] canvas.height=32
[   21.481814] fb: osd[2] frame.width=32
[   21.481815] fb: osd[2] frame.height=32
[   21.481817] fb: osd[2] out_addr_id =0x3
[   22.493504] fb: vpu clkc clock is 199 MHZ
[   22.493514] fb: malloc_osd_memory, cma:ffffff800ad210d8
[   22.493517] fb: malloc_osd_memory, 1232, base:0x000000007f800000, size:8388608
[   22.493519] fb: use ion buffer for fb memory, fb_index=3
[   22.493521] fb: OSD3 as afbcd mode,afbc_type=2
[   22.497237] meson-fb meson-fb: create ion_client ffffffc09aeb3240, handle=ffffffc07ec8b980
[   22.500024] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ea600000, size 8 MiB
[   22.508462] fb:  3, phy: 0x00000000ea600000, vir:0xffffff8011f68000, size=8192K

[   22.508464] fb: Frame buffer memory assigned at
[   22.508467] fb:  3, phy: 0x00000000ea600000, vir:0xffffff8011f68000, size=8192K

[   22.508469] fb:  3, phy: 0x00000000ea600000, vir:0xffffff8011f68000, size=8192K

[   22.508471] fb: logo_index=0,fb_index=3
[   22.508473] fb: ---------------clear fb3 memory ffffff8011f68000
[   22.509788] fb: osd[3] canvas.idx =0x42
[   22.509790] fb: osd[3] canvas.addr=0xea600000
[   22.509791] fb: osd[3] canvas.width=128
[   22.509793] fb: osd[3] canvas.height=32
[   22.509794] fb: osd[3] frame.width=32
[   22.509796] fb: osd[3] frame.height=32
[   22.509798] fb: osd[3] out_addr_id =0x4
[   68.636412] fb: mem_free_work, free memory: addr:800000
[  109.484013] IPVS: Creating netns size=1928 id=1
[  109.509264] zram: Added device: zram0
[  109.509802] zram: Added device: zram1
[  109.513813] zram: Added device: zram2
[  109.514246] zram: Added device: zram3
[  109.515024] zram: Added device: zram4
[  109.515384] zram: Added device: zram5
[  109.554482] zram1: detected capacity change from 0 to 268435456
[  109.592770] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[  109.593697] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  109.601231] Adding 262140k swap on /dev/zram1.  Priority:5 extents:1 across:262140k SS
[  109.603354] zram2: detected capacity change from 0 to 268435456
[  109.633843] Adding 262140k swap on /dev/zram2.  Priority:5 extents:1 across:262140k SS
[  109.645208] meson-remote ff808040.rc: remote_ioctl invalid user space pointer
[  109.645325] zram3: detected capacity change from 0 to 268435456
[  109.683030] Adding 262140k swap on /dev/zram3.  Priority:5 extents:1 across:262140k SS
[  109.684469] zram4: detected capacity change from 0 to 268435456
[  109.684868] IPVS: Creating netns size=1928 id=2
[  109.737887] Adding 262140k swap on /dev/zram4.  Priority:5 extents:1 across:262140k SS
[  109.782998] out of value, fixed it
[  109.783050] id=0 set inskew=0
[  109.783124] AED req_sel0 module:TDMOUT_B
[  109.906122] BT_RADIO going: off
[  109.906128] AML_BT: going OFF
[  110.346154] IPVS: Creating netns size=1928 id=3
[  110.587643] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  110.587748] dhd_open: Enter ffffffc09b39b000
[  110.587750] dhd_open : no mutex held. set lock
[  110.587756] 
               Dongle Host Driver, version 1.579.77.41.10 (r)
[  110.587759] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
[  110.587763] wl_android_wifi_on in 1
[  110.587765] wl_android_wifi_on in 2: g_wifi_on=0
[  110.587768] wifi_platform_set_power = 1
[  110.587771] ======== PULL WL_REG_ON(-1) HIGH! ========
[  110.587786] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
[  110.787807] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
[  111.292399] sdio_reset_comm():
[  111.292448] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[  111.292450] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[  111.298630] meson-mmc: actual_clock :0, HHI_nand: 0x80
[  111.298632] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[  111.316432] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[  111.316434] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[  111.334121] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[  111.336820] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[  111.339502] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[  111.344338] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[  111.350362] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[  111.358213] sdio: queuing unknown CIS tuple 0x8e (9 bytes)
[  111.448711] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[  111.448718] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[  111.448721] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[  111.448727] meson-mmc: Data 1 aligned delay is 0
[  111.448731] meson-mmc: sdio: clk 199999997 tuning start
[  111.449771] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.453918] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.454891] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.455846] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.457331] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.457338] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5
[  111.457343] meson-mmc: sdio: clk 199999997 tuning start
[  111.458314] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.459266] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.460206] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.461817] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.462756] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.462762] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5
[  111.462767] meson-mmc: sdio: clk 199999997 tuning start
[  111.463745] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.465052] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.465925] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.466802] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.467672] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.467677] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5
[  111.467682] meson-mmc: sdio: clk 199999997 tuning start
[  111.468623] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.469545] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.470444] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.471352] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.472249] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.472254] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5
[  111.472259] meson-mmc: sdio: clk 199999997 tuning start
[  111.473263] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.474185] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.475107] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.476012] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.476976] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.476982] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 4, window start 0, size 5
[  111.476989] meson-mmc: sdio: clk 199999997 tuning start
[  111.477892] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.478818] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.479737] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.480656] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.481581] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.481588] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 5, window start 0, size 5
[  111.481593] meson-mmc: sdio: clk 199999997 tuning start
[  111.482504] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.483410] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.484291] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.485287] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.486162] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.486167] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 6, window start 0, size 5
[  111.486172] meson-mmc: sdio: clk 199999997 tuning start
[  111.487052] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.487927] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.488939] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.489820] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.490998] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.491003] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 7, window start 0, size 5
[  111.491008] meson-mmc: sdio: clk 199999997 tuning start
[  111.492089] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.493089] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.493970] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.494842] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.495701] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.495706] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 8, window start 0, size 5
[  111.495711] meson-mmc: sdio: clk 199999997 tuning start
[  111.496784] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.497665] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.498525] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.499397] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.500256] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.500261] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 9, window start 0, size 5
[  111.500266] meson-mmc: sdio: clk 199999997 tuning start
[  111.501258] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.502138] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.502997] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.503884] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.504982] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.504989] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 10, window start 0, size 5
[  111.504994] meson-mmc: sdio: clk 199999997 tuning start
[  111.505892] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.506809] meson-mmc: sdio: rx_tuning_result[1] = 40
[  111.507682] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.508605] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.509526] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.509533] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 11, window start 0, size 5
[  111.509538] meson-mmc: sdio: clk 199999997 tuning start
[  111.510398] meson-mmc: sdio: rx_tuning_result[0] = 40
[  111.510711] meson-mmc: Tuning transfer error: nmatch=13 tuning_err:0xffffffac
[  111.513480] meson-mmc: sdio: rx_tuning_result[2] = 40
[  111.514357] meson-mmc: sdio: rx_tuning_result[3] = 40
[  111.515221] meson-mmc: sdio: rx_tuning_result[4] = 40
[  111.515225] meson-mmc: sdio: best_win_start =2, best_win_size =4
[  111.515231] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
[  111.515234] meson-mmc: delay1:0x0, delay2:0x0
[  111.515291] sdioh_start: set sd_f2_blocksize 256
[  111.515651] 
               
               dhd_bus_devreset: == WLAN ON ==
[  111.515755] F1 signature read @0x18000000=0x17294359
[  111.519818] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[  111.520460] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[  111.520518] dhd_bus_set_default_min_res_mask: Unhandled chip id
[  111.521269] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config_bcm4359c0_ag.txt
[  111.521281] Final fw_path=/lib/firmware/brcm/fw_bcm4359c0_ag.bin
[  111.521285] Final nv_path=/lib/firmware/brcm/nvram_ap6398s.txt
[  111.521288] Final clm_path=/lib/firmware/brcm/clm.blob
[  111.521291] Final conf_path=/lib/firmware/brcm/config_bcm4359c0_ag.txt
[  111.521850] dhd_os_open_image: /lib/firmware/brcm/fw_bcm4359c0_ag.bin (637347 bytes) open success
[  111.590756] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6398s.txt (6096 bytes) open success
[  111.591139] NVRAM version: AP6398S_NVRAM_V3.0_20200312A
[  111.591769] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[  111.783368] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[  111.783411] si_get_pmu_reg_addr: addrRET: 18000670
[  111.783597] bcmsdh_oob_intr_register: HW_OOB irq=103 flags=0x8
[  111.783881] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
[  111.783899] dhd_get_memdump_info: MEMDUMP ENABLED = 2
[  111.784901] Disable tdls_auto_op failed. -1
[  111.784908] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1
[  111.785256] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob
[  111.786345] Firmware up: op_mode=0x0405, MAC=20:50:e7:6b:26:3c
[  111.794906]   Driver: 1.579.77.41.10 (r)
                 Firmware: wl0: Sep 20 2019 20:22:36 version 9.87.51.11.34 (edb7293@shgit) (r711217) FWID 01-c7feb1ee
                 CLM: 9.7.5 
[  111.795124] dhd_txglom_enable: enable 1
[  111.795127] dhd_conf_set_txglom_params: txglom_mode=copy
[  111.795129] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0
[  111.795131] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
[  111.795133] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[  111.795139] dhd_conf_get_disable_proptx: fw_proptx=0, disable_proptx=1
[  111.796152] dhd_pno_init: Support Android Location Service
[  111.822306] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[  111.822312] dhd_rtt_init : FTM is not supported
[  111.822316] dhd_preinit_ioctls: SensorHub diabled 0
[  111.822559] dhd_preinit_ioctls failed to set ShubHub disable
[  111.823564] failed to set WNM capabilities
[  111.823739] dhd_conf_set_country: set country CN, revision 38
[  111.825910] Country code: CN (CN/38)
[  111.827615] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23
[  111.835360] wl_android_wifi_on: Success
[  111.879731] dhd_open : the lock is released.
[  111.879736] dhd_open: Exit ret=0
[  111.914067] BT_RADIO going: on
[  111.914072] AML_BT: going ON
[  112.166731] P2P interface registered
[  112.166741] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc088ce5000, wdev->net:           (null)
[  112.182393] WLC_E_IF: NO_IF set, event Ignored
[  112.183736] P2P interface started
[  112.209528] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  112.601732] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[  112.668716] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[  112.668746] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  113.133641] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[  113.133688] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
[  113.133705] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[  114.897869] fb: osd_release now.index=3,open_count=1
[  114.897882] fb: osd_release now.index=2,open_count=1
[  114.897888] fb: osd_release now.index=1,open_count=1
[  114.921072] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[  120.565712] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[  139.610828] meson_uart ffd22000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[  139.610919] meson_uart ffd22000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200

zfuwen · January 4, 2023, 5:20am

将SSD安装到另一台正常运行的设备上，能正常启动，且能正常读取到SSD里的视频文件。

这样看来和SSD本身没有什么关系，现在还需要我们这边提供什么日志吗？

numbqq · January 4, 2023, 6:04am

zfuwen:

run-parts: failed to exec /etc/update-motd.d/00-header: Exec format error
run-parts: /etc/update-motd.d/00-header exited with return code 1
run-parts: failed to exec /etc/update-motd.d/10-help-text: Exec format error
run-parts: /etc/update-motd.d/10-help-text exited with return code 1
run-parts: failed to exec /etc/update-motd.d/50-motd-news: Exec format error
run-parts: /etc/update-motd.d/50-motd-news exited with return code 1
Last login: Thu Dec 22 18:19:39 CST 2022 on ttyS0

看起来像系统本身的文件系统出现了问题，你们对固件有做过什么改动吗？正常来说不会报这个错误的。

从log看不出原因，这个是必现的？我们这边没法重现你这个现象。

zfuwen · January 4, 2023, 6:22am

1、没改过什么，只是在你系统中安装了python3.8及一些依赖库，然后我们自己编译了httpd服务，mysql数据库服务，自己开发了一些应用进程等在上面跑。

2、29秒卡的问题找到规律了，SSD卡没安装就会卡22秒卡到109秒，安装上就不会。

3、出现报错的问题，重新安装一次系统（SSD卡取下来不做任何改变），然后重新接上SSD卡后是正常的，由此可能是操作系统出问题了，具体原因我们这边也不清楚。
重新安装了系统后，二台设备都正常了。

很是担心咱们的系统到底能不能正常稳定地运行，这些设备都会放到很偏，正常无人去的地方。

对此，是否有什么好建议？保证系统不出异常，包括重启启动不起来之类问题。

前段时间还出现过另一个问题，机器运行了75天左右，设备出现一些奇怪的问题，包括连接部分网络不通（局域网是通的，部分服务器也能连得通），断电重启后所有网络问题都恢复正常。

jelly · May 22, 2023, 6:35am

Starting kernel ...

uboot time: 5333870 us
[    0.366659@2] codec_mm_module_init
[    0.373430@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.549724@2] dmi: Firmware registration failed.
[    0.553667@2] lcd: error: failed to get null
[    0.553687@2] lcd: error: Out of clock range, reset to default setting
[    0.553759@2] lcd: error: lcd_debug_info_if is null
[    0.645459@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    0.817578@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    0.989745@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.161925@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.334063@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.510216@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.686369@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    1.862522@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    2.038674@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    2.214828@2] amlogic-pcie-v2 fc000000.pcieA: Error: Wait linkup timeout.
[    2.309296@2] amlogic-pcie-v2 fc000000.pcieA: phy link never came up
[    2.309477@2] amlogic-pcie-v2 fc000000.pcieA: link timeout, disable PCIE PLL
[    2.309491@2] amlogic-pcie-v2 fc000000.pcieA: power down pcie phy
[    2.512653@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.533922@2] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[    2.535705@2] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[    2.537593@2] ff803000.serial: clock gate not found
[    2.674911@2] amlogic-new-usb3-v2 ffe09080.usb3phy: This phy has no usb port
[    2.685002@2] meson-remote ff808040.rc: don't find the node <led_blink>
[    2.687343@2] meson-remote ff808040.rc: don't find the node <led_blink_frq>
[    2.694902@2] efuse efuse:  open efuse clk gate error!!
[    2.727651@2] meson-fb meson-fb: create ion_client ffffffc099e1ae40, handle=ffffffc099e1b7c0
[    2.727655@2] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
[    7.871072@1] di_get_vpu_clkb: get clk vpu error.
[    7.872323@1] get fclk_div5 err
[    7.873279@1] vdin_drv_probe: vdin cannot get msr clk !!!
[    7.879125@1] get fclk_div5 err
[    7.881778@1] vdin_drv_probe: vdin cannot get msr clk !!!
[    7.890380@1] amlvideo2 probe called
[    7.890913@1] amlvideo2 probe called
[    7.894891@1] Reserved memory: failed to init DMA memory pool at 0x00000000e3000000, size 0 MiB
[    7.907337@2] meson-mmc: >>>>>>>>hostbase ffffff8008a03000, dmode 
[    7.965382@1] meson-mmc: >>>>>>>>hostbase ffffff8008a8d000, dmode 
[    8.004349@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    8.007205@1] meson-mmc: >>>>>>>>hostbase ffffff8008b17000, dmode 
[    8.015656@0] meson-mmc: Tuning transfer error: nmatch=5 tuning_err:0xffffffac
[    8.024263@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    8.050244@1] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
[    8.050244@1] 
[    8.055519@0] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
[    8.061292@0] cectx ff80023c.aocec: cecb_ver:0x1
[    8.065816@0] cectx ff80023c.aocec: line_reg:0x1
[    8.070382@0] cectx ff80023c.aocec: line_bit:0x3
[    8.074998@0] cectx ff80023c.aocec: ee_to_ao:0x1
[    8.079863@0] cectx ff80023c.aocec: not find 'port_num'
[    8.084787@0] cectx ff80023c.aocec: using cec:1
[    8.089319@2] cectx ff80023c.aocec: no hdmirx regs
[    8.094039@2] cectx ff80023c.aocec: no hhi regs
[    8.098555@2] cectx ff80023c.aocec: not find 'output'
[    8.105025@2] cectx ff80023c.aocec: irq cnt:2
[    8.108012@2] cectx ff80023c.aocec: wakeup_reason:0x0
[    8.112983@2] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[    8.118477@2] cectx ff80023c.aocec: aml_cec_probe success end
[    8.573032@0] defendkey ff630218.defendkey: Reserved memory is not enough!
[    8.581136@5] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    8.583231@5] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
[    8.590642@5] aml_dai_tdm_probe, failed add snd tdm controls
[    8.957060@3] edt_ft5x06 3-0038: touchscreen probe failed
[    8.961321@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    8.964178@3] usb usb2: Unsupported the hub
[    8.969782@3] rtc-hym8563 4-0051: hctosys: unable to read the hardware clock
[    9.089977@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    9.093516@3] thermal thermal_zone0: binding zonSELinux:  Could not open policy file <= /etc/selinux/targeted/policy/policy.32:  No such file or directory
[   19.053428@0] cgroup: cgroup2: unknown option "nsdelegate"
[   19.954495@3] out of value, fixed it
[   20.146099@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   20.147084@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   20.154691@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   20.160082@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   20.172619@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   20.173605@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   20.331742@5] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   20.349998@5] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   20.473853@2] meson-fb meson-fb: create ion_client ffffffc099e1ae40, handle=ffffffc07ec8b840
[   20.476645@2] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ea400000, size 1 MiB
[   20.675827@4] No find node.
[   20.711233@4] Amlogic A/V streaming port init
[   20.807806@4] iq name from dts config is ----> os08a10
[   20.817394@4] config sensor os08a10 driver.
[   20.819752@4] pwr_enable: get_named_gpio power-enable fail
[   20.821433@4] set power fail
[   20.835976@4] arm_sensor_i2c_probe: start to probe
[   20.836257@4] system_i2c_init:success to add i2c driver
[   20.840491@4] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.847154@4] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.853812@4] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.883231@4] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.884442@4] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   20.891124@4] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[   21.502810@2] meson-fb meson-fb: create ion_client ffffffc099e1ae40, handle=ffffffc0883bdc00
[   21.505630@2] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ea500000, size 1 MiB
[   22.529348@2] meson-fb meson-fb: create ion_client ffffffc099e1ae40, handle=ffffffc0883bdd80
[   22.532136@2] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ea600000, size 8 MiB
[  109.592509@0] meson-remote ff808040.rc: remote_ioctl invalid user space pointer0, size 8 MiBmeson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffacufreq-0 failed:-22
[  109.756612@3] out of value, fixed it
[  111.403603@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[  111.429640@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[  111.745910@0] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23

Ubuntu 20.04.3 LTS Khadas ttyS0

这个是无法正常启动的另一各情况，具体什么原因？