Which Khadas SBC do you use?
vim3
Which system do you use? Android, Ubuntu, OOWOW or others?
Ubuntu
Which version of system do you use? Khadas official images, self built images, or others?
VIM3_Ubuntu-gnome-focal_Linux-4.9_arm64_EMMC_V1.0.9-211217
Please describe your issue below:
问题描述：
一块正常使用的vim3出现了异常状况，9：46分发现 vim3模块无法ping通，13：50分接显示器输了密码进去网络就通了。
Post a console log of your issue below:
[ 0.549553] vout: vout1: register server: lcd_vout_server
[ 0.549558] vout: vout2: register server: lcd_vout2_server
[ 0.549563] lcd: lcd_get_config from dts
[ 0.549567] lcd: error: failed to get null
[ 0.549581] lcd: , invalid, 0bit, 1080x1920
[ 0.549588] lcd: error: Out of clock range, reset to default setting
[ 0.549659] lcd: error: lcd_debug_info_if is null
[ 0.549784] lcd: lcd_fops_create OK
[ 0.549817] lcd: request lcd_vsync_irq successful
[ 0.549844] lcd: request lcd_vsync2_irq successful
[ 0.549847] lcd: lcd_probe ok
[ 0.550100] vout: create vout attribute OK
[ 0.550201] vout: vout_fops_create OK
[ 0.550205] vout: vout1: register server: nulldisp_vout_server
[ 0.550280] vout: tvout monitor interval:500(ms), timeout cnt:20
[ 0.550297] vout: vout_func_update_viu: 1, mux_sel=2, clk_sel=0
[ 0.550301] hdmitx: hdmitx_set_current_vmode[3725]
[ 0.550305] hdmitx: system: recalc before 1080p60hz 60 1
[ 0.550310] hdmitx: system: recalc after 1080p60hz 2997 50
[ 0.550313] hdmitx: alread display in uboot
[ 0.550317] vout: init mode 1080p60hz set ok
[ 0.550321] vout: aml_tvout_mode_monitor
[ 0.550330] vout: aml_vout_probe OK
[ 0.550929] chip type:0x29
[ 0.551201] Advanced Linux Sound Architecture Driver Initialized.
[ 0.551651] Bluetooth: Core ver 2.22
[ 0.551686] NET: Registered protocol family 31
[ 0.551690] Bluetooth: HCI device and connection manager initialized
[ 0.551699] Bluetooth: HCI socket layer initialized
[ 0.551707] Bluetooth: L2CAP socket layer initialized
[ 0.551733] Bluetooth: SCO socket layer initialized
[ 0.552039] NetLabel: Initializing
[ 0.552044] NetLabel: domain hash size = 128
[ 0.552047] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.552084] NetLabel: unlabeled traffic allowed by default
[ 0.553898] clocksource: Switched to clocksource arch_sys_counter
[ 0.606454] VFS: Disk quotas dquot_6.6.0
[ 0.606510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606630] FS-Cache: Loaded
[ 0.614358] jtag: module init
[ 0.614684] NET: Registered protocol family 2
[ 0.615139] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.615313] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.615500] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.615552] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.615587] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.615737] NET: Registered protocol family 1
[ 0.615762] PCI: CLS 0 bytes, default 64
[ 0.617299] wifi: power_on_pin_OD = 0;
[ 0.617309] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
[ 0.617395] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[ 0.617407] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
[ 0.617413] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
[ 0.617417] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
[ 0.617643] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
[ 0.617649] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
[ 0.617654] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
[ 0.617659] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
[ 0.617664] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
[ 0.617823] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
[ 0.617884] aml_wifi wifi: [wifi_setup_dt] irq num is:(70)
[ 0.617913] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
[ 0.617929] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
[ 0.618192] Trying to unpack rootfs image as initramfs...
[ 0.713441] Freeing initrd memory: 10472K
[ 0.715199] hw perfevents: clusterb_enabled = 1
[ 0.715205] hw perfevents: cpumasks 0x3, 0x3c
[ 0.715233] hw perfevents: cluster A irq = 10
[ 0.715269] hw perfevents: cluster B irq = 11
[ 0.715333] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.717522] audit: initializing netlink subsys (disabled)
[ 0.717570] audit: type=2000 audit(0.652:1): initialized
[ 0.718282] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.726309] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.726499] exFAT: Version 1.2.9
[ 0.727187] Registering sdcardfs 0.1
[ 0.727709] FS-Cache: Netfs 'cifs' registered for caching
[ 0.727956] Key type cifs.spnego registered
[ 0.727969] Key type cifs.idmap registered
[ 0.727976] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.728187] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.728523] fuse init (API version 7.26)
[ 0.729119] SELinux: Registering netfilter hooks
[ 0.732262] NET: Registered protocol family 38
[ 0.732271] Key type asymmetric registered
[ 0.732276] Asymmetric key parser 'x509' registered
[ 0.732444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.732590] io scheduler noop registered (default)
[ 0.732595] io scheduler deadline registered
[ 0.732624] io scheduler cfq registered
[ 0.740524] random: fast init done
[ 0.740557] random: crng init done
[ 0.741021] gpiomem-aml ff634000.gpiomem: Initialised: Registers at 0xff634000
[ 0.741174] gpiomem-aml ff800000.gpiomem_ao: Initialised: Registers at 0xff800000
[ 0.741270] [drm] Initialized
[ 0.741405] Unable to detect cache hierarchy for CPU 0
[ 0.748868] brd: module loaded
[ 0.753285] loop: module loaded
[ 0.754309] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.755381] libphy: Fixed MDIO Bus: probed
[ 0.755590] tun: Universal TUN/TAP device driver, 1.6
[ 0.755594] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.755731] CAN device driver interface
[ 0.756301] REG0:Addr = ffffff80084fe540
[ 0.756312] ee eth reset:Addr = ffffff8008638008
[ 0.756322] auto_cali_idx 0
[ 0.756702] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 0.756707] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 0.756711] Ring mode enabled
[ 0.756715] DMA HW capability register supported
[ 0.756719] Normal descriptors
[ 0.756722] RX Checksum Offload Engine supported
[ 0.756726] COE Type 2
[ 0.756729] TX Checksum insertion supported
[ 0.756732] Wake-Up On Lan supported
[ 0.756765] Enable RX Mitigation via HW Watchdog Timer
[ 0.768409] libphy: stmmac: probed
[ 0.768419] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 0.768424] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[ 0.769521] PPP generic driver version 2.4.2
[ 0.769674] PPP BSD Compression module registered
[ 0.769679] PPP Deflate Compression module registered
[ 0.769696] PPP MPPE Compression module registered
[ 0.769702] NET: Registered protocol family 24
[ 0.769771] usbcore: registered new interface driver asix
[ 0.769841] usbcore: registered new interface driver ax88179_178a
[ 0.769884] usbcore: registered new interface driver cdc_ether
[ 0.769953] usbcore: registered new interface driver cdc_eem
[ 0.769996] usbcore: registered new interface driver net1080
[ 0.770040] usbcore: registered new interface driver rndis_host
[ 0.770081] usbcore: registered new interface driver cdc_subset
[ 0.770123] usbcore: registered new interface driver zaurus
[ 0.770175] usbcore: registered new interface driver cdc_ncm
[ 0.770216] usbcore: registered new interface driver qmi_wwan
[ 0.770236] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.1
[ 0.770289] usbcore: registered new interface driver GobiNet
[ 0.770758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.770762] ehci-pci: EHCI PCI platform driver
[ 0.770807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.770825] ohci-pci: OHCI PCI platform driver
[ 0.771236] usbcore: registered new interface driver cdc_acm
[ 0.771240] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.771281] usbcore: registered new interface driver cdc_wdm
[ 0.771331] usbcore: registered new interface driver usb-storage
[ 0.771406] usbcore: registered new interface driver usbserial
[ 0.771444] usbcore: registered new interface driver usbserial_generic
[ 0.771471] usbserial: USB Serial support registered for generic
[ 0.771511] usbcore: registered new interface driver ch341
[ 0.771535] usbserial: USB Serial support registered for ch341-uart
[ 0.771574] usbcore: registered new interface driver cp210x
[ 0.771598] usbserial: USB Serial support registered for cp210x
[ 0.771639] usbcore: registered new interface driver ftdi_sio
[ 0.771664] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.771708] usbcore: registered new interface driver option
[ 0.771731] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.771768] usbcore: registered new interface driver pl2303
[ 0.771792] usbserial: USB Serial support registered for pl2303
[ 0.772086] mousedev: PS/2 mouse device common for all mice
[ 0.772284] usbcore: registered new interface driver xpad
[ 0.772321] sensor_register_slave:kxtj3,id=0
[ 0.772441] i2c /dev entries driver
[ 0.772636] IR NEC protocol handler initialized
[ 0.772641] IR RC5(x/sz) protocol handler initialized
[ 0.772645] IR RC6 protocol handler initialized
[ 0.772648] IR JVC protocol handler initialized
[ 0.772652] IR Sony protocol handler initialized
[ 0.772655] IR SANYO protocol handler initialized
[ 0.772658] IR Sharp protocol handler initialized
[ 0.772662] IR MCE Keyboard/mouse protocol handler initialized
[ 0.772666] IR XMP protocol handler initialized
[ 0.772723] usbcore: registered new interface driver uvcvideo
[ 0.772727] USB Video Class driver (1.1.1)
[ 0.772772] usbcore: registered new interface driver cx231xx
[ 0.772776] Driver for 1-wire Dallas network protocol.
[ 0.773113] md: linear personality registered for level -1
[ 0.773404] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.773572] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[ 0.773601] Bluetooth: HCI UART driver ver 2.3
[ 0.773607] Bluetooth: HCI UART protocol H4 registered
[ 0.775034] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.775452] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.775738] usbcore: registered new interface driver usbhid
[ 0.775742] usbhid: USB HID core driver
[ 0.776239] meson_cpufreq_init: ignor dsu clk!
[ 0.776244] meson_cpufreq_init: ignor dsu pre parent clk!
[ 0.776284] value of voltage_tolerance 0
[ 0.776289] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[ 0.776302] value of gp1_clk_target 0
[ 0.777288] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[ 0.778104] meson_cpufreq_init: ignor dsu clk!
[ 0.778110] meson_cpufreq_init: ignor dsu pre parent clk!
[ 0.778192] value of voltage_tolerance 0
[ 0.778197] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[ 0.778206] value of gp1_clk_target 0
[ 0.779355] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
[ 0.780008] ff803000.serial: clock gate not found
[ 0.780033] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800863c000
[ 0.780056] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 0.780064] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 0.829149] console [ttyS0] enabled
[ 0.829407] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff800863e000
[ 0.829429] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 34, base_baud = 1500000) is a meson_uart
[ 0.829577] meson_uart ffd22000.serial: ==uart3 reg addr = ffffff80086fa000
[ 0.829592] ffd22000.serial: ttyS3 at MMIO 0xffd22000 (irq = 35, base_baud = 1500000) is a meson_uart
[ 0.830211] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80086fc000
[ 0.830360] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff8008835080
[ 0.830901] edt_ft5x06 3-0038: probing for EDT FT5x06 I2C
[ 0.831205] 4-0020 supply vcc not found, using dummy regulator
[ 0.831680] pca953x 4-0020: interrupt support not compiled in
[ 0.832194] rtc-hym8563 4-0051: no valid clock/calendar values available
[ 0.832257] rtc-hym8563 4-0051: rtc core: registered hym8563 as rtc0
[ 0.832556] mcu_probe
[ 0.832561] mcu_probe: board: 3, hwver: 2
[ 0.832949] create_mcu_attrs
[ 0.832993] mcu_probe,wol enable=0
[ 0.834358] gpio-keypad gpio_keypad: power key(116) registed.
[ 0.834421] input: gpio_keypad as /devices/platform/gpio_keypad/input/input0
[ 0.834509] meson-remote: Driver init
[ 0.834587] meson-remote: remote_probe
[ 0.834593] meson-remote ff808040.rc: protocol = 0x1
[ 0.834596] meson-remote ff808040.rc: don't find the node <led_blink>
[ 0.835724] meson-remote ff808040.rc: led_blink = 0
[ 0.835726] meson-remote ff808040.rc: don't find the node <led_blink_frq>
[ 0.842667] meson-remote ff808040.rc: led_blink_frq = 100
[ 0.842680] meson-remote ff808040.rc: platform_data irq =33
[ 0.842704] meson-remote ff808040.rc: custom_number = 1
[ 0.842714] meson-remote ff808040.rc: ptable->map_size = 13
[ 0.842717] meson-remote ff808040.rc: ptable->custom_name = khadas-ir
[ 0.842720] meson-remote ff808040.rc: ptable->custom_code = 0xff00
[ 0.842722] meson-remote ff808040.rc: ptable->release_delay = 80
[ 0.842727] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
[ 0.842730] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
[ 0.842732] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
[ 0.842734] meson-remote ff808040.rc: reg=0x8, val=0x960050
[ 0.842736] meson-remote ff808040.rc: reg=0xc, val=0x480028
[ 0.842738] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
[ 0.842741] meson-remote ff808040.rc: reg=0x18, val=0x8616800
[ 0.842743] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
[ 0.842745] meson-remote ff808040.rc: reg=0x20, val=0x0
[ 0.842747] meson-remote ff808040.rc: reg=0x24, val=0x0
[ 0.842749] meson-remote ff808040.rc: reg=0x28, val=0x0
[ 0.842944] input: aml_keypad as /devices/platform/ff808040.rc/input/input1
[ 0.843129] meson-remote: IR XMP protocol handler initialized
[ 0.843283] efuse efuse: open efuse clk gate error!!
[ 0.847900] efusekeynum: 1
[ 0.847915] efusekeyname: mac offset: 0 size: 12
[ 0.847996] efuse efuse: probe OK!
[ 0.848799] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[ 0.849021] ge2d: ge2d_init_module
[ 0.849292] ge2d: ge2d clock is 499 MHZ
[ 0.849306] ge2d: reserved mem is not used
[ 0.849328] ge2d: ge2d start monitor
[ 0.849508] vfm_grabber : driver probed successfully
[ 0.849510] vfm_grabber : module initialized successfully
[ 0.849589] [tsync_pcr_init]init success.
[ 0.849673] amvideom vsync irq: 43
[ 0.850014] create_ge2d_work_queue video task ok
[ 0.850035] fb: osd_init_module
[ 0.850184] fb: viu vsync irq: 43
[ 0.850192] fb: viu2 vsync irq: 52
[ 0.850239] 0x000000db:Y=db,U=0,V=0
[ 0.850241] 0x000000dc:Y=dc,U=0,V=0
[ 0.850243] 0x000000dd:Y=dd,U=0,V=0
[ 0.850244] 0x000000de:Y=de,U=0,V=0
[ 0.850246] 0x000000df:Y=df,U=0,V=0
[ 0.850248] 0x000000e0:Y=e0,U=0,V=0
[ 0.854651] fb: osd_rdma_init: rdma_table p=0xa0610000,op=0xa0610000 , v=0xffffff8008887000
[ 0.854666] rdma_register, rdma_table_addr ffffff8008889000 rdma_table_addr_phy a0611000 reg_buf ffffffc099ee7000
[ 0.854668] rdma_register success, handle 3 table_size 4096
[ 0.854670] fb: osd_rdma_init:osd rdma handle = 3.
[ 0.854677] fb: mem_size: 0x800000
[ 0.854678] fb: mem_size: 0x4b80000
[ 0.854680] fb: mem_size: 0x100000
[ 0.854681] fb: mem_size: 0x100000
[ 0.854683] fb: mem_size: 0x800000
[ 0.854712] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[ 0.854714] fb: reserved memory base:0x000000007f800000, size:800000
[ 0.854796] fb: fb def : 1920 1080 1920 2160 32
[ 0.854797] fb: init fbdev bpp is:32
[ 0.854888] fb: malloc_osd_memory, cma:ffffff800ad210d8
[ 0.854890] fb: malloc_osd_memory, 1232, base:0x000000007f800000, size:8388608
[ 0.854900] fb: use ion buffer for fb memory, fb_index=0
[ 0.854901] fb: OSD0 as afbcd mode,afbc_type=2
[ 0.875945] meson-fb meson-fb: create ion_client ffffffc099c75300, handle=ffffffc09aebf6c0
[ 0.875948] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
[ 0.875951] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800b5e6000, size=77312K
[ 0.875954] fb: Frame buffer memory assigned at
[ 0.875954] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800b5e6000, size=77312K
[ 0.875955] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800b5e6000, size=77312K
[ 0.875957] fb: logo_index=0,fb_index=0
[ 0.875958] fb: ---------------clear fb0 memory ffffff800b5e6000
[ 0.888192] fb: osd[0] canvas.idx =0x40
[ 0.888193] fb: osd[0] canvas.addr=0xe5800000
[ 0.888194] fb: osd[0] canvas.width=7680
[ 0.888195] fb: osd[0] canvas.height=2160
[ 0.888196] fb: osd[0] frame.width=1920
[ 0.888197] fb: osd[0] frame.height=1080
[ 0.888198] fb: osd[0] out_addr_id =0x1
[ 2.944615] Console: switching to colour frame buffer device 240x67
[ 3.993915] fb: osd[0] enable: 1 (swapper/0)
[ 5.018875] fb: set osd0 reverse as NONE
[ 6.041920] fb: osd probe OK
[ 6.042155] hdmitx: hdcp: hdmitx_hdcp_init
[ 6.042879] vout: vout2: create vout2 attribute OK
[ 6.043039] vout: vout2: vout2_fops_create OK
[ 6.043197] vout: vout2: clktree_init
[ 6.043202] vout: vout2: register server: nulldisp_vout2_server
[ 6.043310] vout: vout_func_update_viu: 2, mux_sel=3, clk_sel=1
[ 6.043313] vout: vout2: init mode null set ok
[ 6.043317] vout: vout2: aml_vout2_probe OK
[ 6.043494] DI: di_module_init ok.
[ 6.043502] DI: di_module_init: major 506
[ 6.044035] deinterlace deinterlace: assigned reserved memory node linux,di_cma
[ 6.044045] DI: CMA size 0x2800000.
[ 6.044067] pre_irq:67
[ 6.044079] post_irq:68
[ 6.044083] DI: di_probe allocate rdma channel 0.
[ 6.044091] di_get_vpu_clkb: get clk vpu error.
[ 6.044116] DI: vpu clkb <334000000, 667000000>
[ 6.044166] DI:enable vpu clkb.
[ 6.044183] 0x000000e1:Y=e1,U=0,V=0
[ 6.044187] 0x000000e2:Y=e2,U=0,V=0
[ 6.044191] 0x000000e3:Y=e3,U=0,V=0
[ 6.044194] 0x000000f0:Y=f0,U=0,V=0
[ 6.044197] 0x000000f1:Y=f1,U=0,V=0
[ 6.044201] 0x000000f2:Y=f2,U=0,V=0
[ 6.044204] 0x000000f3:Y=f3,U=0,V=0
[ 6.044208] 0x000000f4:Y=f4,U=0,V=0
[ 6.044211] 0x000000f5:Y=f5,U=0,V=0
[ 6.044215] 0x000000f6:Y=f6,U=0,V=0
[ 6.044223] 0x000000f7:Y=f7,U=0,V=0
[ 6.044227] 0x000000f8:Y=f8,U=0,V=0
[ 6.044230] 0x000000f9:Y=f9,U=0,V=0
[ 6.044234] 0x000000fa:Y=fa,U=0,V=0
[ 6.044237] 0x000000fb:Y=fb,U=0,V=0
[ 6.044240] 0x000000fc:Y=fc,U=0,V=0
[ 6.044249] 0x000000fd:Y=fd,U=0,V=0
[ 6.044252] 0x000000fe:Y=fe,U=0,V=0
[ 6.044256] 0x000000ff:Y=ff,U=0,V=0
[ 6.044259] 0x0000003a:Y=3a,U=0,V=0
[ 6.044262] 0x0000003b:Y=3b,U=0,V=0
[ 6.044266] 0x0000003c:Y=3c,U=0,V=0
[ 6.044270] 0x0000003d:Y=3d,U=0,V=0
[ 6.044274] DI: support post write back 61.
[ 6.044434] DI: di_probe:Di use HRTIMER
[ 6.044590] di_probe:ok
[ 6.044713] vdin_drv_init: major 505
[ 6.045016] rdma_register, rdma_table_addr ffffff80088c4000 rdma_table_addr_phy a0612000 reg_buf ffffffc09b2faa00
[ 6.045021] rdma_register success, handle 4 table_size 512
[ 6.045025] vdin_drv_probe:vdin.0 rdma hanld 4.
[ 6.045291] vdin vdin0: assigned reserved memory node linux,vdin0_cma
[ 6.045296]
vdin memory resource done.
[ 6.045302] vdin0 cma_mem_size = 64 MB
[ 6.045308] vdin0 irq: 40 rdma irq: 2
[ 6.045313] set_canvas_manual = 0
[ 6.045316] no urgent_en found
[ 6.045337] get fclk_div5 err
[ 6.046294] vdin_drv_probe: vdin cannot get msr clk !!!
[ 6.051682] vdin_drv_probe: driver initialized ok
[ 6.051826] rdma_register, rdma_table_addr ffffff80088c6000 rdma_table_addr_phy a0613000 reg_buf ffffffc09b2fac00
[ 6.051830] rdma_register success, handle 5 table_size 512
[ 6.051834] vdin_drv_probe:vdin.1 rdma hanld 5.
[ 6.052094] vdin vdin1: assigned reserved memory node linux,vdin1_cma
[ 6.052098]
vdin memory resource done.
[ 6.052104] vdin1 cma_mem_size = 64 MB
[ 6.052109] vdin1 irq: 41 rdma irq: 4
[ 6.052114] set_canvas_manual = 0
[ 6.052118] no urgent_en found
[ 6.052138] get fclk_div5 err
[ 6.054792] vdin_drv_probe: vdin cannot get msr clk !!!
[ 6.060151] vdin_debugfs_init only support debug vdin0 1
[ 6.060155] vdin_drv_probe: driver initialized ok
[ 6.060345] vdin_drv_init: vdin driver init done
[ 6.060350] [viuin..]viuin_init_module viuin module init
[ 6.060700] [viuin..]viuin_probe probe ok.
[ 6.061374] [RX]-hdmirx: hdmirx_init.
[ 6.061379] ESM HLD: Initializing...
[ 6.061559] tvin_afe: tvafe_drv_init: major 503
[ 6.061991] tvin_afe: tvafe_drv_init.
[ 6.062169] tvafe_vbi: vbi: vbi_init.
[ 6.062281] amvdec_csi module: init.
[ 6.062284] amvdec_csi_init_module:major 501
[ 6.062375] amvdec_csi module: init. ok
[ 6.062377] amlvid:info: amlvideo_init called
[ 6.062379] amlvid:info: amlvideo_create_instance called
[ 6.062381] amlvid:info: v4l2_dev.name=:amlvideo-000
[ 6.062507] amlvideo-000: V4L2 device registered as video10
[ 6.062589] amlvideo2 probe called
[ 6.063690] amlvideo2_create_node
[ 6.063798] amlvideo2: V4L2 device registered as video11
[ 6.063814] amlvideo2 probe called
[ 6.067252] amlvideo2_create_node
[ 6.067355] amlvideo2: V4L2 device registered as video12
[ 6.067382] PPMGRDRV: warn: ppmgr module init func called
[ 6.067450] PPMGRDRV: info: ppmgr_driver_probe called
[ 6.067503] Reserved memory: failed to init DMA memory pool at 0x00000000e3000000, size 0 MiB
[ 6.075930] PPMGRDRV: info: ppmgr_dev major:500
[ 6.076349] ionvideo-000: V4L2 device registered as video13
[ 6.076351] ionvid: info: Video Technology Magazine Ion Video
[ 6.076353] ionvid: info: Capture Board ver 1.0 successfully loaded
[ 6.076447] picdec: picdec_driver_probe called.
[ 6.076571] picdec: probe of picdec failed with error -22
[ 6.076667] videosync_create_instance dev_s ffffffc099c9b800,dev_s->dev ffffffc099f6ee80
[ 6.076669] videosync_create_instance reg videosync.0
[ 6.076791] aml_vecm_init:module init
[ 6.076801] videosync_thread started
[ 6.076881]
VECM probe start
[ 6.077043] vlock_status_init vlock_en:0
[ 6.077059] Can't find wb_sel.
[ 6.077061] hdr:Can't find cfg_en_osd_100.
[ 6.077063] Can't find tx_op_color_primary.
[ 6.077065] amlogic, vecm
[ 6.077067] vlock dt support: 1
[ 6.077069] vlock dt new_fsm: 0
[ 6.077070] vlock dt hwver: 0
[ 6.077072] vlock dt phlock_en: 0
[ 6.077074] Can't find vlock_en.
[ 6.077076] Can't find vlock_mode.
[ 6.077078] Can't find vlock_pll_m_limit.
[ 6.077079] Can't find vlock_line_limit.
[ 6.077084] param_config vlock_en:0
[ 6.077095] request amvecm_vsync2_irq successful
[ 6.077097] aml_vecm_probe: ok
[ 6.077125] amdolby_vision_init:module init
[ 6.077243]
amdolby_vision probe start & ver: 20181220
[ 6.077247]
cpu_id=2 tvmode=0
[ 6.077339] dolby_vision_init_receiver(dvel)
[ 6.077341] dolby_vision_init_receiver: dvel
[ 6.077456] amdolby_vision_probe: ok
[ 6.077487] prime_sl module init
[ 6.077650] reg base = ffffff80088ee000
[ 6.077677] gdc ff950000.gdc: assigned reserved memory node linux,gdc_cma
[ 6.077995] vm_init .
[ 6.078449] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 6.078911] meson-mmc: >>>>>>>>hostbase ffffff80088f6000, dmode
[ 6.082225] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 6.082227] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[ 6.125919] meson-mmc: meson_mmc_probe() : success!
[ 6.135701] meson-mmc: >>>>>>>>hostbase ffffff8008a82000, dmode
[ 6.136273] meson-mmc: gpio_cd = 1ca
[ 6.173923] meson-mmc: meson_mmc_probe() : success!
[ 6.174956] meson-mmc: >>>>>>>>hostbase ffffff8008b0c000, dmode
[ 6.175708] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 6.175712] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[ 6.181399] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 6.181405] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[ 6.181409] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[ 6.181414] meson-mmc: Data 1 aligned delay is 0
[ 6.181419] meson-mmc: emmc: clk 199999997 tuning start
[ 6.181451] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[ 6.184169] meson-mmc: emmc: rx_tuning_result[1] = 40
[ 6.185203] meson-mmc: emmc: rx_tuning_result[2] = 40
[ 6.186224] meson-mmc: emmc: rx_tuning_result[3] = 40
[ 6.187144] meson-mmc: emmc: rx_tuning_result[4] = 40
[ 6.187149] meson-mmc: [prev_map] fixed_adj_win_map:30
[ 6.187152] meson-mmc: [0]=0
[ 6.187155] meson-mmc: [1]=1
[ 6.187158] meson-mmc: [2]=1
[ 6.187161] meson-mmc: [3]=1
[ 6.187164] meson-mmc: [4]=1
[ 6.187168] meson-mmc: [_find_fixed_adj_valid_win]retry test fixed adj...
[ 6.187173] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[ 6.187200] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[ 6.190362] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[ 6.198494] meson-mmc: emmc: rx_tuning_result[2] = 40
[ 6.199410] meson-mmc: emmc: rx_tuning_result[3] = 40
[ 6.200328] meson-mmc: emmc: rx_tuning_result[4] = 40
[ 6.200333] meson-mmc: [>>>>>>>>bitmap_xor_dst] fixed_adj_win_map:2
[ 6.200336] meson-mmc: [0]=0
[ 6.200339] meson-mmc: [1]=1
[ 6.200342] meson-mmc: [2]=0
[ 6.200345] meson-mmc: [3]=0
[ 6.200348] meson-mmc: [4]=0
[ 6.200351] meson-mmc: [_find_fixed_adj_valid_win] fir_adj:1
[ 6.200356] meson-mmc: [>>>>>>>>prev_map_range] fixed_adj_win_map:495
[ 6.200359] meson-mmc: [1]=1
[ 6.200362] meson-mmc: [2]=1
[ 6.200365] meson-mmc: [3]=1
[ 6.200368] meson-mmc: [4]=1
[ 6.200371] meson-mmc: [0]=0
[ 6.200376] meson-mmc: left:3, right:0, mid:4, size:4
[ 6.200380] meson-mmc: step:0, delay1:0x0, delay2:0x0
[ 6.200385] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[ 6.200388] meson-mmc: delay1:0x0, delay2:0x0
[ 6.200487] emmc: new HS200 MMC card at address 0001
[ 6.200491] emmc: clock 199999997, 8-bit-bus-width
