VIM3 Manjaro arm 如何进行风扇控制

[numbqq]

风扇默认是工作在自动模式下的，也就是根据温度自动调节，如果你要手动调节的话，可以参考下这个帖子。

5.7x version issues

I checked on my side, the FAN works. FAN control in /boot/env.txt doesn’t work for 5.x kernel now. The FAN works always on auto mode. And the trigger temperature is 80 Celsius. Are you sure the board temperature is higher then 80 Celsius? So the FAN will not work unless the temperature is higher then 80 Celsius. You can check the temperature like this: $ cat /sys/class/thermal/thermal_zone0/temp Anyway, you can trigger the FAN to work manually like this, but the FAN will stop if the temper…