USB-C port to connect from PC

Hi guys!,

I am wondering if it is possible to connect through USB-C cable from a PC to a Khadas box and viceversa. Has anyone tested this?

Regards!,

–
Jorge V

it works, but requires a bit of hacking. see my experiments in this post for more info: How to use the OTG port in device mode

in this case I was trying (and succeeded) to configure the vim2 as a CDC_EEM device to do ethernet emulation over USB

4 Likes

Thanks for your answer @g4b42. Do you think is possible to acomplish this keeping the power in the same cable?.

Regards!,

–
Jorge V

Yes, but recommend a USB3.0 port from your computer/PC side to ensure enough power supply.

Enjoy!

1 Like

Hi @Gouwa, thanks. Is there a manual, post or documentation related?

Regards!,

–
Jorge V

You can read the information from Khadas Docs.

Have fun!

yes, I’ve been using this mode with a powered (ie. yellow connector) USB2 port on my laptop.

otherwise you can also power the board through the GPIO header

Or the USB adjacent to the C connector.