Hello from Austria.
For testing now I’m using “Vim_Ubuntu-server-16.04_Linux-4.9_V170604” downloaded from Khadas Docs branded to emmc
ethtool output:
Settings for eth0:
Supported ports: [ AUI ]
Supported link modes: 10baseT/Half 10baseT/Full **
** 100baseT/Half 100baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 8
Transceiver: external
Auto-negotiation: on
Supports Wake-on: ug
Wake-on: d
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes
The Khadas Vim Pro should have Gbit Network or is it over usb 2.0 ?
iperf output:
iperf -c 10.0.0.58 -P 1 -i 1 -p 5001 -f M -t 10
Client connecting to 10.0.0.58, TCP port 5001
TCP window size: 0.13 MByte (default)
[ 4] local 10.0.0.93 port 53756 connected with 10.0.0.58 port 5001
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 12.0 MBytes 12.0 MBytes/sec
[ 4] 1.0- 2.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 2.0- 3.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 3.0- 4.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 4.0- 5.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 5.0- 6.0 sec 11.1 MBytes 11.1 MBytes/sec
[ 4] 6.0- 7.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 7.0- 8.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 8.0- 9.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 9.0-10.0 sec 11.2 MBytes 11.2 MBytes/sec
[ 4] 0.0-10.0 sec 113 MBytes 11.3 MBytes/sec
Done.
Is there a chance to get gbit speed to the vim pro ?
Greets from Austria !
Thanks in advance.
