板子无法进入内核，麻烦帮忙看看什么原因,谢谢。
启动log如下：
Starting boot.ini...
saradc: 0x2d2, hw_ver: 0x0 (VIM3.V11)
-----fdtfile=---------
uboot type: vendor
--devnums:0 1 2--
Scanning mmc 0:1...
card out
** Bad device mmc 0 **
Scanning mmc 0:5...
card out
** Bad device mmc 0 **
Scanning mmc 1:1...
** Unrecognized filesystem type **
Scanning mmc 1:5...
7454990 bytes read in 238 ms (29.9 MiB/s)
29043200 bytes read in 886 ms (31.3 MiB/s)
88835 bytes read in 15 ms (5.6 MiB/s)
4195 bytes read in 9 ms (455.1 KiB/s)
Import env.txt
Can not get u-boot part UUID, set to NULL
Set default mac address to ethaddr: 02:00:00:0a:18:01!
Booting legacy kernel...VIM3.V11
port mode is usb3.0
----port_mode=0---
Apply dtbo uart3
225 bytes read in 16 ms (13.7 KiB/s)
Apply dtbo pwm_f
345 bytes read in 15 ms (22.5 KiB/s)
Apply dtbo i2c3
223 bytes read in 13 ms (16.6 KiB/s)
Apply dtbo i2s
3330 bytes read in 14 ms (231.4 KiB/s)
Apply dtbo os08a10
1072 bytes read in 15 ms (69.3 KiB/s)
Apply dtbo watchdog
222 bytes read in 17 ms (12.7 KiB/s)
HDMI: Autodetect: 1080p60hz
-----0-----
bootargs=root=UUID=2ba7ceb3-1ef9-4ba6-8996-849689681cd4 rootfstype=ext4 rootflags=data=writeback rw ubootpart=NULL console=ttyS0,115200n8 no_console_suspend consoleblank=0 loglevel=0 logo=osd0,loaded,0x3d800000,panel vout=panel,enable hdmimode=1080p60hz fbcon=rotate:0 fsck.repair=yes net.ifnames=0 wol_enable=0 max_freq_a53=1800 max_freq_a73=2208 jtag=disable mac=02:00:00:0a:18:01 save_ethmac=yes fan=auto khadas_board=VIM3 hwver=VIM3.V11 coherent_pool=2M reboot_mode=cold_boot imagetype=EMMC uboottype=vendor splash quiet plymouth.ignore-serial-consoles vt.handoff=7
------1-----1080000 0x13000000 0x1000000--
## Loading init Ramdisk from Legacy Image at 13000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 7454926 Bytes = 7.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x1000000
reserving fdt memory region: addr=1000000 size=16000
Loading Ramdisk to d3776000, end d3e920ce ... OK
Loading Device Tree to 000000001ffe7000, end 000000001fffffff ... OK
Starting kernel ...
uboot time: 4132714 us