板子用烧录工具无法烧录固件,报错~！

hugoleong · January 20, 2022, 6:38am

用烧录工具烧录固件，提示这个错误，请问什么原因？@numbqq @Frank

numbqq · January 20, 2022, 7:13am

你这边使用的是哪个固件？还有你用的是我们的VIM3板子吗？
log信息太少，看不出问题，你可以看看串口的打印信息。

hugoleong · January 20, 2022, 7:18am

是你们的VIM3板子，下面是log

G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
> bl2_stage_init 0x01
> bl2_stage_init 0x81
> hw id: 0x0000 - pwm id 0x01
> bl2_stage_init 0xc1
> bl2_stage_init 0x02
> 
> L0:00000000
> L1:20000703
> L2:00008067
> L3:14000000
> B2:00402000
> B1:e0f83180
> 
> TE: 145710
> 
> BL2 Built : 15:22:05, Aug 28 2019. g12b g1bf2b53 - luan.yuan@droid15-sz
> 
> Board ID = 8
> Set A53 clk to 24M
> Set A73 clk to 24M
> Set clk81 to 24M
> A53 clk: 1200 MHz
> A73 clk: 1200 MHz
> CLK81: 166.6M
> smccc: 0002810b
> eMMC boot @ 0
> sw8 s
> DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 15:22:01
> board id: 8
> Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
> fw parse done
> Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
> Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
> PIEI prepare done
> fastboot data load
> 00000000
> emmc switch 1 ok
> ddr saved addr:00016000
> Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
> 00000000
> emmc switch 0 ok
> fastboot data verify
> verify result: 265
> Cfg max: 4, cur: 1. Board id: 255. Force loop cfg
> LPDDR4 probe
> ddr clk to 1608MHz
> Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
> 
> dmc_version 0001
> Check phy result
> INFO : ERROR : Training has failed!
> 1D training failed
> Cfg max: 4, cur: 2. Board id: 255. Force loop cfg
> LPDDR4 probe
> ddr clk to 1608MHz
> Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
> 
> dmc_version 0001
> Check phy result
> INFO : End of CA training
> INFO : End of initialization
> INFO : Training has run successfully!
> Check phy result
> INFO : End of initialization
> INFO : End of read enable training
> INFO : End of fine write leveling
> INFO : End of Write leveling coarse delay
> INFO : Training has run successfully!
> Check phy result
> INFO : End of initialization
> INFO : End of read dq deskew training
> INFO : End of MPR read delay center optimization
> INFO : End of write delay center optimization
> INFO : End of read delay center optimization
> INFO : End of max read latency training
> INFO : Training has run successfully!
> 1D training succeed
> Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
> Check phy result
> INFO : End of initialization
> INFO : End of 2D read delay Voltage center optimization
> INFO : End of 2D read delay Voltage center optimization
> INFO : End of 2D write delay Voltage center optimization
> INFO : End of 2D write delay Voltage center optimization
> INFO : Training has run successfully!
> 
> channel==0
> RxClkDly_Margin_A0==77 ps 8
> TxDqDly_Margin_A0==106 ps 11
> RxClkDly_Margin_A1==0 ps 0
> TxDqDly_Margin_A1==0 ps 0
> TrainedVREFDQ_A0==30
> TrainedVREFDQ_A1==0
> VrefDac_Margin_A0==30
> DeviceVref_Margin_A0==30
> VrefDac_Margin_A1==0
> DeviceVref_Margin_A1==0
> 
> 
> channel==1
> RxClkDly_Margin_A0==87 ps 9
> TxDqDly_Margin_A0==106 ps 11
> RxClkDly_Margin_A1==0 ps 0
> TxDqDly_Margin_A1==0 ps 0
> TrainedVREFDQ_A0==29
> TrainedVREFDQ_A1==0
> VrefDac_Margin_A0==29
> DeviceVref_Margin_A0==28
> VrefDac_Margin_A1==0
> DeviceVref_Margin_A1==0
> 
>  dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004 
> 
> soc_vref_reg_value 0x 00000028 00000028 00000028 00000027 00000027 00000027 00000027 00000026 00000026 00000027 00000025 00000025 00000025 00000028 00000029 00000027 00000028 00000025 00000029 00000029 00000028 00000028 00000027 00000029 00000028 00000028 00000027 00000028 00000028 00000026 00000029 00000028 dram_vref_reg_value 0x 00000014
> 2D training succeed
> aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 13:54:19
> auto size-- 65535DDR cs0 size: 2048MB
> DDR cs1 size: 0MB
> DMC_DDR_CTRL: 00c0002cDDR size: 2048MB
> cs0 DataBus test pass
> cs0 AddrBus test pass
> 
> 100bdlr_step_size ps== 420
> result report
> boot times 0Enable ddr reg access
> 00000000
> emmc switch 3 ok
> Authentication key not yet programmed
> get rpmb counter error 0x00000007
> 00000000
> emmc switch 0 ok
> Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
> Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000d0000, part: 0
> 0.0;M3 CHK:0;cm4_sp_mode 0
> MVN_1=0x00000000
> MVN_2=0x00000000
> [Image: g12b_v1.1.3390-6ac5299 2019-09-26 14:10:05 luan.yuan@droid15-sz]
> OPS=0x10
> ring efuse init
> chipver efuse init
> 29 0b 10 00 01 04 0c 00 00 0e 35 37 4d 4d 4e 50 
> [0.018961 Inits done]
> secure task start!
> high task start!
> low task start!
> run into bl31
> NOTICE:  BL31: v1.3(release):4fc40b1
> NOTICE:  BL31: Built : 15:58:17, May 22 2019
> NOTICE:  BL31: G12A normal boot!
> NOTICE:  BL31: BL33 decompress pass
> ERROR:   Error initializing runtime service opteed_fast
> 
> 
> U-Boot 2015.01 (Dec 28 2021 - 08:05:17)
> 
> DRAM:  2 GiB
> Relocation Offset is: 76e42000
> spi_post_bind(spifc): req_seq = 0
> register usb cfg[0][1] = 0000000077f39210
> aml_i2c_init_port init regs for 0
> MCU version: 0x00 0x03
> MCU version is to low! Doesn't support froce boot from SD card.
> MMC:   aml_priv->desc_buf = 0x0000000073e32a70
> aml_priv->desc_buf = 0x0000000073e34db0
> SDIO Port B: 0, SDIO Port C: 1
> co-phase 0x3, tx-dly 0, clock 400000
> co-phase 0x3, tx-dly 0, clock 400000
> co-phase 0x3, tx-dly 0, clock 400000
> emmc/sd response timeout, cmd8, status=0x3ff2800
> emmc/sd response timeout, cmd55, status=0x3ff2800
> co-phase 0x3, tx-dly 0, clock 400000
> co-phase 0x1, tx-dly 0, clock 40000000
> aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x2000
> [mmc_startup] mmc refix success
> init_part() 297: PART_TYPE_AML
> [mmc_init] mmc init success
> start dts,buffer=0000000073e37620,dt_addr=0000000073e37620
> get_partition_from_dts() 91: ret 0
> parts: 3
> 00:      logo   0000000000800000 1
> 01:   ramdisk   0000000002000000 1
> 02:    rootfs   ffffffffffffffff 4
> init_part() 297: PART_TYPE_AML
> eMMC/TSD partition table have been checked OK!
> crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
> crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
> crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
> mmc env offset: 0x6c00000 
> In:    serial
> Out:   serial
> Err:   serial
> reboot_mode=cold_boot
> [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
> _verify_dtb_checksum()-3477: calc 78e48c91, store 78e48c91
> _verify_dtb_checksum()-3477: calc 78e48c91, store 78e48c91
> dtb_read()-3694: total valid 2
> update_old_dtb()-3675: do nothing
> aml_i2c_init_port init regs for 0
> fusb302_init: Device ID: 0x91
> 
> amlkey_init() enter!
> [EFUSE_MSG]keynum is 1
> vpu: clk_level in dts: 7
> vpu: vpu_power_on
> vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
> vpu: vpu_module_init_config
> vpp: vpp_init
> vpp: vpp osd2 matrix rgb2yuv..............
> cvbs: cpuid:0x29
> LCD_RESET PIN: 0
> lcd: detect mode: tablet, key_valid: 0
> lcd: detect lcd_clk_path: 1
> lcd: load config from dts
> lcd: pinctrl_version: 2
> lcd: use panel_type=lcd_0
> lcd: bl: pinctrl_version: 2
> lcd: bl: name: backlight_pwm, method: 1
> lcd: bl: aml_bl_power_ctrl: 0
> Net:   dwmac.ff3f0000
> amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 1
> MACADDR:02:00:00:0c:04:01(from chipid)
> 
> upgrade_step=2
> reboot_mode:::: cold_boot
> 
> amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 1
> [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
> 
> mac address: c8:63:14:70:53:27
> [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
> edid preferred_mode is <NULL>[0]
> hdr mode is 0
> dv  mode is ver:0  len: 0
> hdr10+ mode is 0
> HDMI cable is NOT connected
> hpd_state=0
> [OSD]load fb addr from dts:/meson-fb
> [OSD]set initrd_high: 0x7f800000
> [OSD]fb_addr for logo: 0x7f800000
> [OSD]load fb addr from dts:/meson-fb
> [OSD]fb_addr for logo: 0x7f800000
> [OSD]VPP_OFIFO_SIZE:0xfff01fff
> [CANVAS]canvas init
> [CANVAS]addr=0x7f800000 width=5760, height=2160
> card out
> ** Bad device mmc 0 **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> 1080138 bytes read in 47 ms (21.9 MiB/s)
> [OSD]osd_hw.free_dst_data: 0,1079,0,1919
> [OSD]osd1_update_disp_freescale_enable
> cvbs: outputmode[panel] is invalid
> hdmitx: outputmode[panel] is invalid
> vpp: vpp_matrix_update: 0
> vpp: g12a/b post2(bit12) matrix: YUV limit -> RGB ..............
> lcd: enable: TS050, mipi, 1080x1920@47.6Hz
> lcd: tablet driver init(ver 20180718): mipi
> lcd: lcd_pll_wait_lock: pll_lock=1, wait_loop=1
> vpp: vpp_init_lcd_gamma_table
> lcd: pixel_clk = 120.000MHz, bit_rate = 960.000MHz, lanebyteclk = 120.000MHz
> lcd:  Waiting STOP STATE LANE
> lcd: dsi init on
> lcd: bl: set level: 100, last level: 0
> lcd: bl: aml_bl_power_ctrl: 1
> lcd: clear mute
> vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
> 
> amlkey_init() enter!
> amlkey_init() 71: already init!
> [EFUSE_MSG]keynum is 1
> [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
> 
> mac address: c8:63:14:70:53:27
> [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
> gpio: pin GPIOAO_7 (gpio 7) value is 1
> saradc: 0x28b, hw_ver: 0x32 (VIM3.V12)
> Product checking: pass! Hardware version: VIM3.V12
> normal power on
> boot wol: disable
> port mode is usb3.0
> Hit Enter or space or Ctrl+C key to stop autoboot -- :  0 
> kvim3#

hugoleong · January 20, 2022, 7:24am

板子现在的问题是上电就自动进入升级模式（也没按升级按钮），然后用工具进行升级，就提示这个错误

hugoleong · January 20, 2022, 7:42am

@numbqq 工具的错误log：

> [15:25:28 420][Global][Inf]--Catch DBT_DEVICEARRIVAL
> [15:25:28 420][Global][Inf]--Scan usb device
> [15:25:28 420][Global][Inf]--Aml scan WorldCup Device
> [15:25:28 421][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [15:25:28 421][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&25902f46&0&00e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [15:25:28 422][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&13dd9c32&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:28 422][Global][Inf]-------->[Port0]NoDeviceConnected
> [15:25:28 422][Global][Inf]-------->[Port1]NoDeviceConnected
> [15:25:28 422][Global][Inf]-------->[Port2]NoDeviceConnected
> [15:25:28 422][Global][Inf]-------->[Port3]NoDeviceConnected
> [15:25:28 422][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [15:25:28 422][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_86941043&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [15:25:28 422][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1148bc98&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:28 422][Global][Inf]-------->[Port0]NoDeviceConnected
> [15:25:28 422][Global][Inf]-------->[Port1]NoDeviceConnected
> [15:25:28 423][Global][Inf]-------->[Port2]Other device
> [15:25:28 424][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [15:25:28 424][Global][Inf]-------->[Port4]NoDeviceConnected
> [15:25:28 424][Global][Inf]-------->[Port5]NoDeviceConnected
> [15:25:28 424][Global][Inf]-------->[Port6]NoDeviceConnected
> [15:25:28 424][Global][Inf]-------->[Port7]NoDeviceConnected
> [15:25:28 424][Global][Inf]-------->[Port8]USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:28 424][Global][Inf]---------->[Port0]NoDeviceConnected
> [15:25:28 424][Global][Inf]---------->[Port1]NoDeviceConnected
> [15:25:28 424][Global][Inf]---------->[Port2]NoDeviceConnected
> [15:25:28 425][Global][Inf]---------->[Port3]Other device
> [15:25:28 425][Global][Inf]-------->[Port9]Other device
> [15:25:28 425][Global][Inf]-------->[Port10]NoDeviceConnected
> [15:25:28 425][Global][Inf]-------->[Port11]NoDeviceConnected
> [15:25:28 425][Global][Inf]-------->[Port12]NoDeviceConnected
> [15:25:28 425][Global][Inf]-------->[Port13]NoDeviceConnected
> [15:25:28 425][Global][Inf]-------->[Port14]NoDeviceConnected
> [15:25:28 425][Global][Inf]-------->[Port15]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port16]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port17]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port18]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port19]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port20]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port21]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port22]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port23]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port24]NoDeviceConnected
> [15:25:28 426][Global][Inf]-------->[Port25]NoDeviceConnected
> [15:25:28 426][Global][Inf]--Scan USB host controller complete
> [15:25:28 426][Global][Inf]--Update data center with HubMap
> [15:25:28 426][Global][Inf]--Update hub2 device data
> [15:25:28 426][Global][Inf]--Update HUB2-1 
> [15:25:28 426][HUB2-1][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-2 
> [15:25:28 426][HUB2-2][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-3 
> [15:25:28 426][HUB2-3][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [15:25:28 426][HUB2-4][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-5 
> [15:25:28 426][HUB2-5][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-6 
> [15:25:28 426][HUB2-6][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-7 
> [15:25:28 426][HUB2-7][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-8 
> [15:25:28 426][HUB2-8][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-9 \\.\USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:28 426][HUB2-9][Inf]--Update device path
> [15:25:28 426][Global][Inf]--Update HUB2-10 
> [15:25:28 426][HUB2-10][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-11 
> [15:25:28 427][HUB2-11][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-12 
> [15:25:28 427][HUB2-12][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-13 
> [15:25:28 427][HUB2-13][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-14 
> [15:25:28 427][HUB2-14][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-15 
> [15:25:28 427][HUB2-15][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-16 
> [15:25:28 427][HUB2-16][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-17 
> [15:25:28 427][HUB2-17][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-18 
> [15:25:28 427][HUB2-18][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-19 
> [15:25:28 427][HUB2-19][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-20 
> [15:25:28 427][HUB2-20][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-21 
> [15:25:28 427][HUB2-21][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-22 
> [15:25:28 427][HUB2-22][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-23 
> [15:25:28 427][HUB2-23][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-24 
> [15:25:28 427][HUB2-24][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-25 
> [15:25:28 427][HUB2-25][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Update HUB2-26 
> [15:25:28 427][HUB2-26][Inf]--Update device path
> [15:25:28 427][Global][Inf]--Scan end 
> [15:25:33 551][Global][Inf]--User click start button
> [15:25:33 552][Global][Inf]--SetErase
> [15:25:33 552][Global][Inf]--Enable burning 1
> [15:25:33 553][Global][Inf]--Scan usb device
> [15:25:33 553][Global][Inf]--Aml scan WorldCup Device
> [15:25:33 553][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [15:25:33 553][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&25902f46&0&00e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [15:25:33 553][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&13dd9c32&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:33 553][Global][Inf]-------->[Port0]NoDeviceConnected
> [15:25:33 553][Global][Inf]-------->[Port1]NoDeviceConnected
> [15:25:33 553][Global][Inf]-------->[Port2]NoDeviceConnected
> [15:25:33 553][Global][Inf]-------->[Port3]NoDeviceConnected
> [15:25:33 553][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [15:25:33 553][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_86941043&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [15:25:33 553][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1148bc98&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:33 612][Global][Inf]--Burning thread HUB2-4 start
> [15:25:33 675][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000bdc
> [15:25:33 737][HUB2-4][Inf]--Connect path=符合 USB xHCI 的主机控制器/P0/P3
> [15:25:33 737][HUB2-4][Inf]--Start burning...
> [15:25:33 801][HUB2-4][Inf]--------------ERASE BOOTLOADER------------
> [15:25:33 912][HUB2-4][Inf]--start SendIdentifyCmd
> [15:25:38 926][HUB2-4][Err]--IOCTL_IDENTIFY_HOST_Handler ret=-116 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: 由于线程退出或应用程序请求，已中止 I/O 操作。
> 
> 
> 
> [15:25:38 926][HUB2-4][Err]--Identify status failed
> [15:25:38 933][HUB2-4][Err]--[0x00101004]擦除bootloader/USB限流/设备识别/命令结果返回错误
> [15:25:38 934][HUB2-4][Inf]--Close device handle 0x00000bdc
> [15:25:48 926][Global][Inf]-------->[Port0]NoDeviceConnected
> [15:25:53 928][Global][Inf]-------->[Port1]NoDeviceConnected
> [15:25:53 929][Global][Inf]-------->[Port2]Other device
> [15:25:53 931][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [15:25:53 931][Global][Inf]-------->[Port4]NoDeviceConnected
> [15:25:53 931][Global][Inf]-------->[Port5]NoDeviceConnected
> [15:25:53 931][Global][Inf]-------->[Port6]NoDeviceConnected
> [15:25:53 931][Global][Inf]-------->[Port7]NoDeviceConnected
> [15:25:53 931][Global][Inf]-------->[Port8]USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:53 932][Global][Inf]---------->[Port0]NoDeviceConnected
> [15:25:53 932][Global][Inf]---------->[Port1]NoDeviceConnected
> [15:25:53 932][Global][Inf]---------->[Port2]NoDeviceConnected
> [15:25:53 933][Global][Inf]---------->[Port3]Other device
> [15:25:53 933][Global][Inf]-------->[Port9]Other device
> [15:25:53 934][Global][Inf]-------->[Port10]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port11]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port12]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port13]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port14]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port15]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port16]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port17]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port18]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port19]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port20]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port21]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port22]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port23]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port24]NoDeviceConnected
> [15:25:53 934][Global][Inf]-------->[Port25]NoDeviceConnected
> [15:25:53 934][Global][Inf]--Scan USB host controller complete
> [15:25:53 934][Global][Inf]--Update data center with HubMap
> [15:25:53 934][Global][Inf]--Update hub2 device data
> [15:25:53 934][Global][Inf]--Update HUB2-1 
> [15:25:53 934][HUB2-1][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-2 
> [15:25:53 934][HUB2-2][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-3 
> [15:25:53 934][HUB2-3][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [15:25:53 934][HUB2-4][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-5 
> [15:25:53 934][HUB2-5][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-6 
> [15:25:53 934][HUB2-6][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-7 
> [15:25:53 934][HUB2-7][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-8 
> [15:25:53 934][HUB2-8][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-9 \\.\USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:25:53 934][HUB2-9][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-10 
> [15:25:53 934][HUB2-10][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-11 
> [15:25:53 934][HUB2-11][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-12 
> [15:25:53 934][HUB2-12][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-13 
> [15:25:53 934][HUB2-13][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-14 
> [15:25:53 934][HUB2-14][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-15 
> [15:25:53 934][HUB2-15][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-16 
> [15:25:53 934][HUB2-16][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-17 
> [15:25:53 934][HUB2-17][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-18 
> [15:25:53 934][HUB2-18][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-19 
> [15:25:53 934][HUB2-19][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-20 
> [15:25:53 934][HUB2-20][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-21 
> [15:25:53 934][HUB2-21][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-22 
> [15:25:53 934][HUB2-22][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-23 
> [15:25:53 934][HUB2-23][Inf]--Update device path
> [15:25:53 934][Global][Inf]--Update HUB2-24 
> [15:25:53 935][HUB2-24][Inf]--Update device path
> [15:25:53 935][Global][Inf]--Update HUB2-25 
> [15:25:53 935][HUB2-25][Inf]--Update device path
> [15:25:53 935][Global][Inf]--Update HUB2-26 
> [15:25:53 935][HUB2-26][Inf]--Update device path
> [15:25:53 935][Global][Inf]--Scan end 
> [15:26:08 461][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
> [15:26:08 461][Global][Inf]--Catch DBT_DEVICEARRIVAL
> [15:26:08 461][Global][Inf]--Scan usb device
> [15:26:08 461][Global][Inf]--Aml scan WorldCup Device
> [15:26:08 462][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [15:26:08 462][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&25902f46&0&00e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [15:26:08 462][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&13dd9c32&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:26:08 462][Global][Inf]-------->[Port0]NoDeviceConnected
> [15:26:08 462][Global][Inf]-------->[Port1]NoDeviceConnected
> [15:26:08 462][Global][Inf]-------->[Port2]NoDeviceConnected
> [15:26:08 462][Global][Inf]-------->[Port3]NoDeviceConnected
> [15:26:08 462][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [15:26:08 462][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_86941043&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [15:26:08 463][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1148bc98&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:26:08 463][Global][Inf]-------->[Port0]NoDeviceConnected
> [15:26:08 463][Global][Inf]-------->[Port1]NoDeviceConnected
> [15:26:08 463][Global][Inf]-------->[Port2]Other device
> [15:26:08 463][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [15:26:08 463][Global][Inf]-------->[Port4]NoDeviceConnected
> [15:26:08 463][Global][Inf]-------->[Port5]NoDeviceConnected
> [15:26:08 463][Global][Inf]-------->[Port6]NoDeviceConnected
> [15:26:08 463][Global][Inf]-------->[Port7]NoDeviceConnected
> [15:26:08 463][Global][Inf]-------->[Port8]USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:26:08 463][Global][Inf]---------->[Port0]NoDeviceConnected
> [15:26:08 463][Global][Inf]---------->[Port1]NoDeviceConnected
> [15:26:08 463][Global][Inf]---------->[Port2]NoDeviceConnected
> [15:26:08 464][Global][Inf]---------->[Port3]Other device
> [15:26:08 464][Global][Inf]-------->[Port9]Other device
> [15:26:08 464][Global][Inf]-------->[Port10]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port11]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port12]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port13]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port14]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port15]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port16]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port17]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port18]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port19]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port20]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port21]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port22]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port23]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port24]NoDeviceConnected
> [15:26:08 464][Global][Inf]-------->[Port25]NoDeviceConnected
> [15:26:08 464][Global][Inf]--Scan USB host controller complete
> [15:26:08 464][Global][Inf]--Update data center with HubMap
> [15:26:08 464][Global][Inf]--Update hub2 device data
> [15:26:08 464][Global][Inf]--Update HUB2-1 
> [15:26:08 465][HUB2-1][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-2 
> [15:26:08 465][HUB2-2][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-3 
> [15:26:08 465][HUB2-3][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [15:26:08 465][HUB2-4][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-5 
> [15:26:08 465][HUB2-5][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-6 
> [15:26:08 465][HUB2-6][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-7 
> [15:26:08 465][HUB2-7][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-8 
> [15:26:08 465][HUB2-8][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-9 \\.\USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [15:26:08 465][HUB2-9][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-10 
> [15:26:08 465][HUB2-10][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-11 
> [15:26:08 465][HUB2-11][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-12 
> [15:26:08 465][HUB2-12][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-13 
> [15:26:08 465][HUB2-13][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-14 
> [15:26:08 465][HUB2-14][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-15 
> [15:26:08 465][HUB2-15][Inf]--Update device path
> [15:26:08 465][Global][Inf]--Update HUB2-16 
> [15:26:08 465][HUB2-16][Inf]--Update device path

numbqq · January 20, 2022, 7:48am

@hugoleong
用的是哪个固件？硬件上自己有没有改动？

烧录报错时串口的log也提供下。

hugoleong · January 20, 2022, 8:07am

硬件没有修改过，固件是我自己编译出来的，有修改过内核驱动，但是这个固件在其他VIM3板子可以烧录，串口的log我上面有发出，不知道是不是您指的log？@numbqq

numbqq · January 20, 2022, 8:10am

可以试试烧录我们最新的固件

烧录固件时串口的log，不是启动时的log。

hugoleong · January 20, 2022, 8:14am

麻烦提供下你们最新的固件呢

另外这个烧录固件的log怎么打印出来，进入烧录状态之后，用工具烧录，串口似乎就没再打印log出来，停留在：

kvim3#run update
InUsbBurn
[MSG]sof
Set Addr 37
Get DT cfg
Get DT cfg
Get DT cfg
set CFG

numbqq · January 20, 2022, 8:16am

Server：https://dl.khadas.com/Firmware/VIM3/Ubuntu/EMMC/VIM3_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.10-220108.img.xz
Desktop：https://dl.khadas.com/Firmware/VIM3/Ubuntu/EMMC/VIM3_Ubuntu-gnome-focal_Linux-4.9_arm64_EMMC_V1.0.10-220108.img.xz

hugoleong · January 20, 2022, 8:47am

我用工具烧录你们这个官网的固件也是一样的失败错误

> [16:40:26 712][Global][Inf]--User click refresh button
> [16:40:26 720][Global][Inf]--Burning thread HUB2-4 start
> [16:40:26 783][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000a30
> [16:40:26 845][HUB2-4][Inf]--Connect path=符合 USB xHCI 的主机控制器/P0/P3
> [16:40:26 845][HUB2-4][Inf]--Start burning...
> [16:40:26 909][HUB2-4][Inf]--------------ERASE BOOTLOADER------------
> [16:40:27 019][HUB2-4][Inf]--start SendIdentifyCmd
> [16:40:27 528][Global][Inf]--User click refresh button
> [16:40:27 711][Global][Inf]--User click refresh button
> [16:40:27 903][Global][Inf]--User click refresh button
> [16:40:28 104][Global][Inf]--User click refresh button
> [16:40:28 313][Global][Inf]--User click refresh button
> [16:40:32 034][HUB2-4][Err]--IOCTL_IDENTIFY_HOST_Handler ret=-116 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: 由于线程退出或应用程序请求，已中止 I/O 操作。
> 
> 
> 
> [16:40:32 034][HUB2-4][Err]--Identify status failed
> [16:40:32 038][HUB2-4][Err]--[0x00101004]擦除bootloader/USB限流/设备识别/命令结果返回错误
> [16:40:32 038][HUB2-4][Inf]--Close device handle 0x00000a30
> [16:46:13 646][Global][War]--User click stop button
> [16:46:13 647][Global][Inf]--Enable burning 0
> [16:46:16 629][Global][Inf]--User click open button
> [16:46:20 517][Global][Inf]--Image path C:\hugo\方案\晶晨\固件\khadas官网固件\VIM3_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.10-220108.img
> [16:46:20 517][Global][Inf]--OpenImg C:\hugo\方案\晶晨\固件\khadas官网固件\VIM3_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.10-220108.img
> [16:46:27 536][Global][Inf]--check img crc success! 
> [16:46:27 537]Parse platform.conf 
> [16:46:27 539][Global][Inf]--Parsing burning package
> [16:46:27 539][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
> [16:46:27 539][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
> [16:46:27 551][Global][Inf]--Get burning key
> [16:46:52 092][Global][Inf]--User click start button
> [16:46:52 093][Global][Inf]--SetErase
> [16:46:52 093][Global][Inf]--Enable burning 1
> [16:46:52 093][Global][Inf]--Scan usb device
> [16:46:52 093][Global][Inf]--Aml scan WorldCup Device
> [16:46:52 095][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [16:46:52 095][Global][Inf]--DevPath:\\?\pci#ven_1b21&dev_1242&subsys_86751043&rev_00#4&25902f46&0&00e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [16:46:52 095][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&13dd9c32&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [16:46:52 095][Global][Inf]-------->[Port0]NoDeviceConnected
> [16:46:52 095][Global][Inf]-------->[Port1]NoDeviceConnected
> [16:46:52 095][Global][Inf]-------->[Port2]NoDeviceConnected
> [16:46:52 095][Global][Inf]-------->[Port3]NoDeviceConnected
> [16:46:52 095][Global][Inf]--Host: 符合 USB xHCI 的主机控制器
> [16:46:52 095][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_86941043&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
> [16:46:52 095][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&1148bc98&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [16:46:52 095][Global][Inf]-------->[Port0]NoDeviceConnected
> [16:46:52 095][Global][Inf]-------->[Port1]NoDeviceConnected
> [16:46:52 096][Global][Inf]-------->[Port2]Other device
> [16:46:52 096][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [16:46:52 096][Global][Inf]-------->[Port4]NoDeviceConnected
> [16:46:52 096][Global][Inf]-------->[Port5]NoDeviceConnected
> [16:46:52 096][Global][Inf]-------->[Port6]NoDeviceConnected
> [16:46:52 096][Global][Inf]-------->[Port7]NoDeviceConnected
> [16:46:52 096][Global][Inf]-------->[Port8]USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [16:46:52 096][Global][Inf]---------->[Port0]NoDeviceConnected
> [16:46:52 096][Global][Inf]---------->[Port1]NoDeviceConnected
> [16:46:52 096][Global][Inf]---------->[Port2]NoDeviceConnected
> [16:46:52 096][Global][Inf]---------->[Port3]Other device
> [16:46:52 097][Global][Inf]-------->[Port9]Other device
> [16:46:52 097][Global][Inf]-------->[Port10]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port11]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port12]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port13]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port14]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port15]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port16]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port17]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port18]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port19]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port20]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port21]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port22]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port23]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port24]NoDeviceConnected
> [16:46:52 097][Global][Inf]-------->[Port25]NoDeviceConnected
> [16:46:52 097][Global][Inf]--Scan USB host controller complete
> [16:46:52 097][Global][Inf]--Update data center with HubMap
> [16:46:52 097][Global][Inf]--Update hub2 device data
> [16:46:52 097][Global][Inf]--Update HUB2-1 
> [16:46:52 097][HUB2-1][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-2 
> [16:46:52 097][HUB2-2][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-3 
> [16:46:52 097][HUB2-3][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
> [16:46:52 097][HUB2-4][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-5 
> [16:46:52 097][HUB2-5][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-6 
> [16:46:52 097][HUB2-6][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-7 
> [16:46:52 097][HUB2-7][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-8 
> [16:46:52 097][HUB2-8][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-9 \\.\USB#VID_05E3&PID_0610#5&521a615&0&9#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
> [16:46:52 097][HUB2-9][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-10 
> [16:46:52 097][HUB2-10][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-11 
> [16:46:52 097][HUB2-11][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-12 
> [16:46:52 097][HUB2-12][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-13 
> [16:46:52 097][HUB2-13][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-14 
> [16:46:52 097][HUB2-14][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-15 
> [16:46:52 097][HUB2-15][Inf]--Update device path
> [16:46:52 097][Global][Inf]--Update HUB2-16 
> [16:46:52 098][HUB2-16][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-17 
> [16:46:52 098][HUB2-17][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-18 
> [16:46:52 098][HUB2-18][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-19 
> [16:46:52 098][HUB2-19][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-20 
> [16:46:52 098][HUB2-20][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-21 
> [16:46:52 098][HUB2-21][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-22 
> [16:46:52 098][HUB2-22][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-23 
> [16:46:52 098][HUB2-23][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-24 
> [16:46:52 098][HUB2-24][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-25 
> [16:46:52 098][HUB2-25][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Update HUB2-26 
> [16:46:52 098][HUB2-26][Inf]--Update device path
> [16:46:52 098][Global][Inf]--Scan end 
> [16:46:52 117][Global][Inf]--Burning thread HUB2-4 start
> [16:46:52 179][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&521a615&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000af4
> [16:46:52 243][HUB2-4][Inf]--New CloneImageProxy
> [16:46:52 243][Global][Inf]--OpenImg C:\hugo\方案\晶晨\固件\khadas官网固件\VIM3_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.10-220108.img
> [16:46:52 243][HUB2-4][Inf]--Connect path=符合 USB xHCI 的主机控制器/P0/P3
> [16:46:52 243][HUB2-4][Inf]--Start burning...
> [16:46:52 307][HUB2-4][Inf]--------------ERASE BOOTLOADER------------
> [16:46:52 418][HUB2-4][Inf]--start SendIdentifyCmd
> [16:46:57 423][HUB2-4][Err]--IOCTL_IDENTIFY_HOST_Handler ret=-116 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: 由于线程退出或应用程序请求，已中止 I/O 操作。
> 
> 
> 
> [16:46:57 423][HUB2-4][Err]--Identify status failed
> [16:46:57 426][HUB2-4][Err]--[0x00101004]擦除bootloader/USB限流/设备识别/命令结果返回错误
> [16:46:57 427][HUB2-4][Inf]--Close device handle 0x00000af4

numbqq · January 20, 2022, 8:51am

@hugoleong 换别的USB数据线或USB端口或电脑再试试。