Things I personally confirmed while using the Edge2

[guumiincloudcat]

1. OOWOW cannot be updated automatically online.

2. The Panfrost driver performs worse than the default driver.
   → When installed, YouTube videos show tearing.

3. With the default driver, the Alacritty and Kitty terminals do not work.

4. To enable RK3588 hardware acceleration, follow the instructions in the link below:
   → https://github.com/nyanmisaka/ffmpeg-rockchip/wiki/Compilation
   (After applying it, YouTube playback in Chromium reduces CPU usage from the 80% range to around 15%. Firefox also uses hardware acceleration, but CPU usage remains relatively high at around 20–25%.)

5. Do not purchase the Station. The Ethernet performance is extremely slow, making it effectively nothing more than adding a 3.5mm headphone jack.

6. The Fenix 1.7.5 image has an issue with language locale configuration, so it must be set manually in the terminal.

7. On Android 14, a bug causes the display to not appear after rebooting.

[numbqq]

@guumiincloudcat

• OOWOW cannot be updated automatically online.

We will check this issue.

@guumiincloudcat

• The Panfrost driver performs worse than the default driver.
  → When installed, YouTube videos show tearing.

Need to check, the system doesnt use panfrost by default.

@guumiincloudcat

• With the default driver, the Alacritty and Kitty terminals do not work.

Need to check.

@guumiincloudcat

To enable RK3588 hardware acceleration, follow the instructions in the link below:

No need this step, the ffmpeg is preinstalled on lastest images.

@guumiincloudcat

• Do not purchase the Station. The Ethernet performance is extremely slow, making it effectively nothing more than adding a 3.5mm headphone jack.

The ethernet on the station is 100M, please note.

@guumiincloudcat

The Fenix 1.7.5 image has an issue with language locale configuration, so it must be set manually in the terminal.

What issues you have? Could you provide more information ?

@guumiincloudcat

1. On Android 14, a bug causes the display to not appear after rebooting.

How to reproduce this issue? Could you provide more information ?

[guumiincloudcat]

Need to check, the system doesnt use panfrost by default.
→ Yes, i testet Panfrost driver with Khadas Document and rollbacked.

No need this step, the ffmpeg is preinstalled on lastest images.
→ When i played youtube after first boot , cpu usage was 75~80%.
But after applied rkmpp, it went to about 15%.

What issues you have? Could you provide more information ?
→ It appeared When i tried to install Korean language.
and Chinese have same problem.

How to reproduce this issue? Could you provide more information ?
→ If i have time for test Android, i will check again and share result.

[numbqq]

@guumiincloudcat

When i played youtube after first boot , cpu usage was 75~80%.
But after applied rkmpp, it went to about 15%.

What image you used? Latest image 1.7.5 preinstall all the packages for hardware acceleration.

[guumiincloudcat]

It’s you are right. I confused during repeated installation GPU drivers.

I tested again, included driver was good. Didn’t need to change.