hi, superceleron, I wanted to know for myself, does kernel support init.d in your firmware?
well i dint check it but i think i enable it, i think…
1 Like
Well guys here is the build… you guys have IMG and OTA.
So ones that are on my older builds use ota app that is in the rom to update without losing your settings/data.
6 Likes
Hi, Superceleron, I didn’t look a lot at your assembly, I really liked it! torrent online instantly launched 80 GB. I wanted to clarify, noise reduction, do you have 0, or do I need to do this myself? Thank you so much!
yes i set it to 0, you dont need to do anything.
2 Likes
Hello superceleron , the picture quality has not changed, I compare it with android smart TV (the picture is clearer), on the same TV settings, what else can I do? 
Otherwise, everything is fine with you!
I like the cooling and loading of the processor !!! everything is almost perfect!
1 Like
hmm, go to settings->display settings->picture and mess with settings(except backlight) especially DNR.
Other than that i dont see much else i can do!
Great job superceleron! I have been in the testing process for two days, it is very exciting !!!
before update
after - it was cool !!!
2 Likes
Well i actually think that is not working, i was going to remove it, but i leave it there to see if amlogic comes to fix it one day…
2 Likes
Yes
I think that is more for the other side of a TV HDMI port as in internal control of the TV’s output is this ship is used in a TV and not a TV box but will stand or sit if corrected 
In this one i think it needs to be amlogic, because it looks like DNR is on and cant be disabled.
Maybe @Terry has a idea or can ask them!
Dunno what you mean!
upscaling - the process of increasing the resolution and quality of a digital image or video. It is used at the hardware level in devices.
I have 4k, and when I turn on the video with a resolution of 1080, the device does not upscale it.
I manually set 1080(Display Mode), and the clarity of the picture appeared!
AFRd changes the frequency.
It is also necessary to automatically change the resolution!
something like this 
.
hmm that is normally done by the tv and not the device itself, some players i think can do it in the device.
I think Kodi is one of them see playback settings something is there, but not sure!
And i think you mean auto change the resolution to the one matching the video!
Yes, maybe I didn’t put it right!
I think both that and that. the telly always upscales to 4k, but if you give it a 4k output with boxing, it skips that way. But boxing is also upscaled to the image set for exit.
I just would not want to manually switch constantly!
really need your help!
there is such a function on ugoos, but I chose khadas!
By the way, now I see that DNR is working!
Здравствуйте, не получается подключить M2X Extension Board с SSD. Переключатель USB-3 to PCE после перезагрузки, возвращается снова в режим USB-3. У Вас есть возможность проверить этот режим? Заранее спасбо.
Hello, I can’t connect the M2X Extension Board with SSD. USB-3 to PCE switch after reboot, returns to USB-3 mode again. Do you have the opportunity to check this mode? Thanks in advance.
this is probably better for you in khadas tech support write
1 Like
I’ve noticed something else here, AFRd doesn’t always work out correctly, the screenshot shows the movie 23.976, and AFRd does not change it, 59.94 is visible in the curtain.
well that is a AFRD issue, maybe report it to is autor, i think he is from 4pda.
Well you can leave it here, i will check when i can… going to leave my Vim’s builds in the “oven” for some time, since i have lots of work to do in my real job.
1 Like