Thanks . Working great
Awesome , thanks for all your updates
NEW Android.Pie V200103 for VIM3 krescue installation image is ready!
USAGE: https://dl.khadas.com/Firmware/Krescue/images/README.krescue.usage.txt
tried to install as before through the image Krescue on the SD card, BUT the preinstalled Android TV (from SuperCeleron) blocks the loading of the Krescue image on SD card. Who installed with preinstalled Androyd TV from supercelerone how did you update (I have a wifi and can’t update without an image recorded on the SD card)?
You could use Krescue to erase the eMMC(all data and apps will be deleted).
If you place the Krescue image(*kresq) you want to flash in to the SD card’s dumps/downloads folder, it will be available to flash from Krescue.
yes previous android builds can block boot from SD
SOLUTIONS
- erase emmc ( serial uart uboot command line =>
store init 3
or https://github.com/hyphop/khadas-rescue/blob/master/docs/README-rescue-emmc-clean.md) - VIM1 VIM2 – mask rom mode triple F key simple start from SD
- VIM3 VIM3L – update mode long press P key
- manual uboot commands =>
fatload mmc 0:1 20000000 s905_autoscript && autoscr 20000000; fatload mmc 1:1 20000000 s905_autoscript && autoscr 20000000
READ MORE =>
Friend, I understand about what you write, but the problem is different :).
thanks! I trying this way
Yes, the simplest and most reliable solution is to erase the old image and install a new one!!!
in my case it always works 100%!
I used etcher to make Krescue and it boots fine with Supercerlons Android TV V200130 and previous, i am in KRESCUE right now via reboot with sdcard instal led and downloading Android Pie v2000103 via Lan
Ye i also didn’t had any issue in booting krescue… weird you have that issue!
did I understand you correctly? You have exactly the VIM3L device (not just VIM3) and you first installed the android TV (version No. 1), and then also installed the android TV (version No. 2)?
Vim3 here , i tried with both Android and Android Tv previous versions User and Debug also
Thanks @superceleron
this is a significant difference friend and these are very different devices.
I understand. But you try installed version number 2 on the preinstalled version number 1 АTV mod?
Yes thats what i said and you never mentioned in your first post that it was Vim3L , i just assumed ir was Vim3 as i was previously asking about rescue image for Vim3
NEW
MAINLINE UBOOT kresq image -> VIMx.UBOOT.mainline.emmc.kresq for all VIM1 VIM2 VIM3 VIM3L
just single uboot usefull for boot up system from sd or USB / PCIe or DHCP TFTP
CHANGES
- add
script
cmd for easy bootup simple plain-text script - without mkimage wrapper (example script https://github.com/hyphop/khadas-rescue-tools/blob/master/projects/UBOOT.mainline.krescue/BOOT/boot.cmd ) - uboot env can stored to fat 1st partition (fix permament ethernet hw addr )
- additional lzo + zstd compression
LINKS
MEGA INSTALL
curl -jkL dl.khadas.com/.mega | bash -s - VIMx VIMx.UBOOT.mainline.emmc.kresq > /dev/mmcblk0
NEW Ubuntu image -> VIMx.Ubuntu.mainline.5.5.xfce.bionic.test.emmc.kresq for VIM1 VIM2 VIM3 VIM3L
- https://dl.khadas.com/Firmware/Krescue/images/VIMx.Ubuntu.mainline.5.5.xfce.bionic.test.emmc.kresq
- https://dl.khadas.com/Firmware/Krescue/images/
NOTES
- last Krescue system required https://dl.khadas.com/Firmware/Krescue/dump/ from 2020-03-01
- installation time 70 - 100 sec
- VIM2 VIM3 VIM3L tested OK
- VIM1 - Xorg fail (we will fix soon)
- uboot start script replaced by boot.cmd plain text file
- prepared from https://dl.khadas.com/Firmware/VIM3/Ubuntu/SD_USB/VIM3_Ubuntu-xfce-bionic_Linux-5.5-rc2_arm64_SD-USB_V0.8.2-20200103.7z
MEGA shell INSTALL
curl -jkL dl.khadas.com/.mega | bash -s - VIMx VIMx.UBOOT.mainline.emmc.kresq > /dev/mmcblk?
curl -jkL dl.khadas.com/.mega | bash -s - --help # more info read help
30 different installation images available for VIMx already - https://dl.khadas.com/Firmware/Krescue/images/
curl -jkL dl.khadas.com/.mega | bash -s - -l
...
VIM1.Android.Pie_V190823.emmc.kresq
VIM1.Android.TV.v2.0-20200130.DEBUG.SC.emmc.kresq
VIM1.LAKKA.2.3.pre.emmc.kresq
VIM2.Android.Nougat_V190518.emmc.kresq
VIM2.COREELEC.9.2.0.emmc.kresq
VIM2.LAKKA.2.3.pre.emmc.kresq
VIM2.VIM1.COREELEC.9.2.1.emmc.kresq
VIM3.Android.Pie_V191130.emmc.kresq
VIM3.Android.Pie_V200103.emmc.kresq
VIM3.Android.TV.v2.0-20200117.DEBUG.SC.img.emmc.kresq
VIM3L.Android.Pie_V191130.emmc.kresq
VIM3L.Android.Pie_V200103.emmc.kresq
VIM3L.Android.TV.v2.0-20200120.SC.emmc.kresq
VIM3L.Android.TV_FINAL-v1.0-20191023.SC.emmc.kresq
VIM3L.Android.v2.0-20200120-ROOT-FIXED.SC.emmc.kresq
VIM3L.COREELEC.9.2.0.emmc.kresq
VIM3x.COREELEC.9.2.nightly.emmc.kresq
VIM3x.EmuElec.ng.3.2.pre.emmc.kresq
VIMx.Debian.9.stretch.server.kernel-5.5.X.mainline.emmc.kresq
VIMx.Manjaro.linux.kde.plasma.test.emmc.kresq
VIMx.Manjaro.linux.xfce.test.emmc.kresq
VIMx.OpenWrt.19.07.0.servers.test.emmc.kresq
VIMx.OpenWrt.19.07.1.servers.v0.61.emmc.kresq
VIMx.OpenWrt.servers.test.emmc.kresq
VIMx.UBOOT.mainline.emmc.kresq
VIMx.Ubuntu-xfce-bionic_Linux-4.9_arm64_V20190917.emmc.kresq
VIMx.Ubuntu-xfce-bionic_Linux-4.9_arm64_V20191231.emmc.kresq
VIMx.Ubuntu.mainline.5.5.xfce.bionic.test.emmc.kresq
VIMx.Volumio.last.emmc.kresq
VIMx.Volumio.test.emmc.kresq
An impressive collection.
But please save some energy for the Krescue Edge version.
dual boot OS many want
please don’t forget to update debian to buster instead of stretch and with latest 5.5 kernel !
better is even to let us know how to do it by ourselves (using fenix for example)