Khadas Edge - LibreELEC

LibreELEC - 03/08/2020
Download link:
https://mega.nz/file/8IsX3TrI#5GwnxusDTN44a5TCn432U5nHXCkDGG8BumAhmyPV_R0

Fan not working, so use extra cooling if planning to use the netflix addon.

4 Likes

It should be very interesting!
:slightly_smiling_face:

thanks to mo123 and the Khadas team!

I continue my tests, and for Rockchip 3399 everything looks good in this assembly! As a test I use my favorite tools: TorrServe torrent engine, a couple of 4K HDR movies, Avatar movie 100 gigabytes and Terminator (2019) 60 gigabyte ,in Blu-ray ,both movies, everything goes without problems, without any stops.
I personally liked it!
:+1::slightly_smiling_face::+1:


2 Likes

New LE posted 03/08/2020

  • Updated to latest LE code base
  • Based on Kodi 18.8
  • Enabled install addons from unknown sources by default
  • Enabled Expert Settings by default
  • Speed improvements
  • Mpeg4 hardware decoding
  • Added support for 1080p Netflix playback
  • Game Emulators added

https://mega.nz/file/8IsX3TrI#5GwnxusDTN44a5TCn432U5nHXCkDGG8BumAhmyPV_R0

4 Likes

@mo123 One question are the DVB modules active? In these buildings.
The question is why I don’t see active in the master branch!

This is a build (mod) for Rockchip from mo123,there are probably big differences from what you show
:slightly_smiling_face:

DRIVER_ADDONS_SUPPORT=“yes” in my build
I just didn’t add crazycat since it couldn’t build.
This is based on the older 4.4 kernel, not LibreELEC master based on the 5.x kernel where most things aren’t working yet.

3 Likes

@mo123 Perfect I thought you were using the master branch!
I tried to activate manually and I get construction errors.
Thank you.

Hi
I used Libreelec image from Libreelec web, it works only from SD and i have noticied audio delay in all videos (local an online), and very low SD speed.

Does this build has same problem?

hello, everything is stable in this sense, I personally checked :slightly_smiling_face:
all Libreelec assemblies boot from sd, fact

New LibreELEC build
https://mega.nz/file/AmpBgbyR#eR1fISfGG9sbr-C7yhkp1bq5RpJ3eGo697cuqIdnHUo

Please check if it boots correctly and if audio works correctly since there are new ALSA audio patches.

4 Likes

RC control not works

To be honest, the stock remote is not the best solution for TV boxes, but maybe someone else needs an IR remote.
the radio-controlled remote control is much more convenient!
:man_shrugging:t3:

new LIBREELEC image suitable for krescue install

1 Like

test LIBREELEC image for EDGE 4K support + IR remote control

i have build LIBREELEC from sources

  • 4K - works
  • PERFORMANCE - nice
  • Khadas IR remote control - works
  • UART - serial console - works
git checkout 9.2.6

IMAGE

or https://dl.khadas.com/Firmware/Krescue/images/ - all images can be installed by online under Krescue

write me guys which version have better support for Edge ?

2 Likes

It looks cheerful on eMMC, of ​​course, the most important thing is whether Rockchip can handle 4K / 60fps, is it very finicky in this sense… I’ll let you know! :stuck_out_tongue_winking_eye:

See you later

Well, 4k60 works, but otherwise the same issues as always:

  • wired ethernet not working (what is the problem?)
  • fan not working (never mind, it’s noisy anyway)
  • terrible audio issues with Dolby Digital pass-through

So, back to the RPi4 as a working Kodi device (at least at FullHD). And back to the drawer with the Edge… :frowning:

may be only for u :wink: ?

for me wired etherned works

master@universe:~$ ssh root@libreelec
##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): devel-20201216182130-6bd7e98 (RK3399.arm)
LibreELEC:~ # 
LibreELEC:~ # ifconfig 
eth0      Link encap:Ethernet  HWaddr 96:9F:C5:35:F4:76  
          inet addr:192.168.100.214  Bcast:192.168.100.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3234 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2397 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3484214 (3.3 MiB)  TX bytes:240389 (234.7 KiB)
          Interrupt:24 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:32 errors:0 dropped:0 overruns:0 frame:0
          TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:6317 (6.1 KiB)  TX bytes:6317 (6.1 KiB)

LibreELEC:~ # 

terrible audio issues with Dolby Digital pass-through

yes something broken - your right
but same not really needed :wink:

Maybe. I don’t know. It does not get configured by DHCP and I have not tested manual configuration. Other distributions “just work”. (And some other LibreELEC images too.)

Unfortunately, the sound is the crucial factor for me. I do not insist on 4k at the moment, but I do insist on surround sound. That is what I need now.