Hello,
I just purchased one of the new cases for the VIM4, however the included antennas do not fit. It looks like the MHF/IPEX connector is different than on the antennas included with the VIM4.
Hi @Bitannihilator
Can you provide photos of the antennas and VIM4? And what’s the hardware version of your board?
The antennas in the DIY CASE2 is for MHF_1 slot (VIM4 V13 and newer), so if your board hardware version is not V13 or above, then you will can’t use it. But any way, you can use the orignal antennas on the VIM4.
Thanks Ivan. My board is V12 which explains why the antennas do not fit. Can I cut down the antennas that came with my VIM4 to fit the case? They are significantly larger than the ones included with the case.
You can use the orignal antennas on the VIM4, don’t you have? You don’t need to use the new one from the DIY CASE2 package.
The antennas that came with my VIM4 are too tall to fit in the DIY CASE2. Theres no way to make them fit without cutting them
Hello @Bitannihilator
The antennas in DIY CASE2 is designed for hardware version V13 or above with a MHF_1 slot (replace of MHF_4 which is easy to broken).
But anyway, we will send you the new antennas suiable for your board and DIY CASE2.