How to get STM8S MCU Image

[sungchan_hwang]

Which system do you use? Android, Ubuntu, OOWOW or others?

OOWOW

Which version of system do you use? Please provide the version of the system here:

Recent

Please describe your issue below:

I have a VIM1S board.
The board is not booting, and I suspect it may be damaged.
Previously, when I turned on the power, logs were displayed, but now there is no output at all.
Since the STM8S manages power, I would like to try reflashing the image.
How can I do this?

I am looking for an STM8S image. However, after checking multiple links and websites, I couldn’t find the STM8S image. Could you provide me with a link where I can find it?

Is the method for flashing the STM8S image the same as described on the website below?

Khadas Tone 2 Pro, bricked after firmware flash error

Hi Lay_Lwinko, Sorry for the bad experience. Why this happening After an unexpected flash failure, XMOS will restore the factory version firmware. The factory firmware of XMOS is not very compatible with the earlier upgrade program of the MCU, and the current device status is stuck in the upgrade process of XMOS to MCU. Subsequent MCU firmware has fixed this issue. Currently, The MCU program needs to be upgraded to solve this problem. Need your help: Provide the serial number, and I will g…

Post a console log of your issue below:

No log

[numbqq]

@sungchan_hwang

The board is not booting, and I suspect it may be damaged.
Previously, when I turned on the power, logs were displayed, but now there is no output at all.

Could try to quick press FUNC key 3 times to check whether you can see the RED LED blink?

@sungchan_hwang

Since the STM8S manages power, I would like to try reflashing the image.
How can I do this?

It may not releated to the MCU firmware issue and MCU firmware is not opened.