- Your new dts file should be placed in fenix/linux/arch/arm64/boot/dts/amlogic/kvim3_linux.dts
- Delete the old dtb file “kvim3_linux.dtb”
- Go to fenix root and type
make kernel - After compilation go to fenix/linux/arch/arm64/boot/dts/amlogic here you should find the newly compiled .dtb file
- Alternatively you can use
make kernel-debthis will make .deb file that will replace the .dtb file in your khadas board.
I see you are trying to overclock the big cores to 2.6GHz… many have tried this but even a 50 MHz is not possible using this method
also your .dts is invalid… the opp voltage supported by VRM is
voltage-table = <1040000 0>,
<1030000 3>,
<1020000 6>,
<1010000 8>,
<1000000 11>,
<990000 14>,
<980000 17>,
<970000 20>,
<960000 23>,
<950000 26>,
<940000 29>,
<930000 31>,
<920000 34>,
<910000 37>,
<900000 40>,
<890000 43>,
<880000 45>,
<870000 48>,
<860000 51>,
<850000 54>,
<840000 56>,
<830000 59>,
<820000 62>,
<810000 65>,
<800000 68>,
<790000 70>,
<780000 73>,
<770000 76>,
<760000 79>,
<750000 81>,
<740000 84>,
<730000 87>,
<720000 89>,
<710000 92>,
<700000 95>,
<690000 98>,
<680000 100>;
Anyway good luck to you