I use armbian with 5.15.119 kernel version. Display P08-RT2660TP-MAIN-1.0
Panel can work with 1080p60hz with resize mode. And work only with Android.
Is there any ways to get it work with 1024x600p60hz at ubuntu fenix or armbian?
– Kernel Boot Log —
[ 3.444791] [input]: mbox chan is NULL
[ 3.447318] [hdmitx:] system: hdmi_rext: 1300
[ 3.447550] [hdmitx:] *ERROR* not get regbase index 11
[ 3.447667] get cts_hdmi_axi_clk err
[ 3.450460] [hdmitx:] hdmitx_common_init_bootup_format_para init ok
[ 3.450491] [hdmitx:] format_para: frl_rate 0
[ 3.450494] [hdmitx:] format_para: ffffff801030dc20 vic [5]
format_para: name 1080i60hz frac 1
format_para: colorspace: rgb, colordepth: 8bit
format_para: TMDS 74176 DIV40 0,0
[ 3.496705] AML_CODEC_MM (145) used greatest stack depth: 12176 bytes left
[ 3.523689] [mmc]: ds_sht:20, window:12, intf3:0x414008, clock:0x100a0003, adjust:0x0
[ 3.523854] mmc0: new HS400 MMC card at address 0001
[ 3.525124] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
[ 3.527320] mmcblk0: p1
[ 3.528467] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB
[ 3.530619] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB
[ 3.533540] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (509:0)
[ 3.534247] adc_keypad adc_keypad: Not find mbox channel byidx
[ 3.534264] [input]: mbox chan is NULL
[ 3.587377] [RX]-up_phy_addr = 1
[ 3.587399] [hdmitx:] edid: blk0 raw data
[ 3.587440] [hdmitx:] 00ffffffffffff0012e50021502d31011c130103812f1a782e3585a656489a24125054afef0001010101010101010101010101010101a1130040415819202c58
3600dc0c1100001a000000ff00300a0a0a0a0a0a0a0a0a0a0a0a000000fd00384b1e5315000a202020202020000000fc0048444d490a0a0a0a0a0a0a0a0a01f9
[ 3.587448] [hdmitx:] edid: blk1 raw data
[ 3.587487] [hdmitx:] 020321714e0607020315961112130414051f90230907078301000065030c0010008c0ad090204031200c405500b98821000018011d8018711c1620582c2500b9
882100009e011d80d0721c1620102c2580b9882100009e011d00bc52d01e20b8285540b9882100001e023a80d072382d40102c4580b9882100001e00000000d0
[ 3.587505] [hdmitx:] fs = 3, cd = 4, tmds_clk = 74176
[ 3.587513] [hdmitx:] update audio N 11648
[ 3.591358] adc_keypad adc_keypad: Not find mbox channel byidx
[ 3.591376] [input]: mbox chan is NULL
[ 3.591845] aml_vdac_config_probe: cpu_id:7, name:meson-s4-vdac
[ 3.591858] not get cdac_disable.
[ 3.592703] adc_keypad adc_keypad: Not find mbox channel byidx
[ 3.592721] [input]: mbox chan is NULL
[ 3.596330] dummy_venc_probe OK
[ 3.597099] adc_keypad adc_keypad: Not find mbox channel byidx
[ 3.597118] [input]: mbox chan is NULL
[ 3.597402] vout: fr_policy:2
[ 3.597414] vout: error: aml_vout_get_dt_info: can't get vsync irq
[ 3.597763] [hdmitx:] *ERROR* hdmitx_validate_vmode validate 1024x600p60hz fail
[ 3.597776] vout: error: no matched vout_init mode 1024x600p60hz, force to invalid
[ 3.597789] vout: error: vout1: vout_func_set_vmode: current_server is NULL
[ 3.597793] vout: error: init mode invalid set error