AndroidTool_Release_v2.71打开img出错

Edge
1

Which system do you use? Android, Ubuntu, OOWOW or others?

Debian、Ubuntu

Which version of system do you use? Khadas official images, self built images, or others?

http://dl.khadas.com/firmware/Edge/Debian/Edge_Debian-server-buster_Linux-5.9-rc2_arm64_EMMC_V0.9.3-200908.img.xz
https://dl.khadas.com/firmware/Edge/Ubuntu/SD_USB/edge-ubuntu-20.04-gnome-linux-5.18-fenix-1.1.1-220725.img.xz

Please describe your issue below:

AndroidTool_Release_v2.71打开Edge_Debian-server-buster_Linux-5.9-rc2_arm64_EMMC_V0.9.3-200908.img时崩溃了，打开edge-ubuntu-20.04-gnome-linux-5.18-fenix-1.1.1-220725.img时提示“加载固件失败！”

Post a console log of your issue below:


**Delete this line and post your log here.**
2

@numbqq @Frank 帮忙确认一下，谢谢

3

Hello @loveconick

5.x kernel 固件不支持用AndroidTool工具烧录。

4

那用什么工具烧录？麻烦给下链接，谢谢谢谢谢谢谢谢谢谢

5

@numbqq 那用什么工具烧录？麻烦提供一下，ubuntu下的工具也不行
zzy@ubuntu:~/edgv/utils$ rk-burn-tool -i /mnt/hgfs/edgeV/Edge_Debian-server-buster_Linux-5.9-rc2_arm64_EMMC_V0.9.3-200908.img
Burn to eMMC…
Rockchip Android image (or linux image compatible with AndroidTool one image burning) found!
Try to burn Rockchip image…
Using /home/zzy/edgv/utils/rk-flash-tool/tools/Linux_Upgrade_Tool/config.ini
Program Log will save in the /home/zzy/upgrade_tool/log/
Loading firmware…
/usr/local/bin/rk-burn-tool: line 126: 46159 Segmentation fault $ANDROID_TOOL UF “$IMAGE”

zzy@ubuntu:~/edgv/utils$ burn-tool -v rk -i /mnt/hgfs/edgeV/Edge_Debian-server-buster_Linux-5.9-rc2_arm64_EMMC_V0.9.3-200908.img
Try to burn Rockchip image…
Burn to eMMC…
Rockchip Android image (or linux image compatible with AndroidTool one image burning) found!
Try to burn Rockchip image…
Using /home/zzy/edgv/utils/rk-flash-tool/tools/Linux_Upgrade_Tool/config.ini
Program Log will save in the /home/zzy/upgrade_tool/log/
Loading firmware…
/home/zzy/edgv/utils/rk-flash-tool/rk-burn-tool: line 126: 46196 Segmentation fault $ANDROID_TOOL UF “$IMAGE”

6

Hello @loveconick

5.x 内核固件只能写入到SD卡。参考如下：

7

@numbqq 从https://docs.khadas.com/linux/zh-cn/edge/index.html里没找到5.x的内核不支持用AndroidTool，也没找到只能写入到SD卡，我写入U盘可以吗？目前的状态是用Etcher将edge-ubuntu-20.04-gnome-linux-5.18-fenix-1.1.1-220725.img写入U盘，将U盘插入edgeV，加电后HDMI显示器上没有任何输出，是需要通过什么操作选择从U盘启动吗还是不支持U盘，只能SD卡？

8

@numbqq 请告诉我edgv怎么从外部设备（SD卡、U盘）启动，就是这个链接里的内容：https://docs.khadas.com/linux/zh-cn/edge/boot_from_ext_media.html，我打不开，显示404

9

Hello @loveconick

对于Edge来说，把固件写入到SD卡，插上SD卡重启后会自动从SD卡启动。