Hey team,
is that possible to build Android 11 for VIM3L?
I’ve tried the instructions from this post Flashing Android 11 on VIM3 - #8 by tenk.wang
But, unfortunately, that doesn’t work for the VIM3L.
Thanks
@cwang95 VIM3L
source build/envsetup.sh
lunch yukawa-userdebug
make TARGET_USE_TABLET_LAUNCHER=true TARGET_VIM3L=true TARGET_KERNEL_USE=5.4 -j16
- flash Uboot:
cd path/to/aosp/device/amlogic/yukawa/bootloader/
./tools/update write u-boot_kvim3l_noab.bin 0xfffa0000 0x10000
./tools/update run 0xfffa0000
./tools/update bl2_boot u-boot_kvim3l_noab.bin
fastboot oem format
fastboot flash bootloader u-boot_kvim3l_noab.bin
fastboot erase bootenv
fastboot reboot bootloader
- press reset key.
- flash img:
cd out/target/product/yukawa
fastboot flash boot boot.img
fastboot flash super super.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash dtbo dtbo-unsigned.img
fastboot reboot
Hi @tenk.wang
Thanks for the feedback,
The problem I had was that I can’t build the super.img out.
I tried your post here but I can’t boot into the system successfully.
When I checked the system log, it showed lots of exceptions when booting.
Is there another way to flash Android 11?
Or, I guess this question is more specific, how can I enable dynamic partition for it?