Which system do you use? Android, Ubuntu, OOWOW or others?
Ubuntu
Which version of system do you use? Khadas official images, self built images, or others?
Official
Please describe your issue below:
No issue, just wanted to post a link to my 3D printable case:
This is a two part case for the Khadas Edge 2 SBC.
Two parts to print. A base and a cover.
The Edge2 mounts to the base with M2 standoffs (8mm, 5mm barrel, 3mm threads) and screws. I got mine from Amazon:
https://a.co/d/hvCMDoJ
Currently a work...
Post a console log of your issue below:
None…
3 Likes
Genom
October 31, 2022, 5:35pm
2
I’ll give it a print. Dont know I have the standoffs for it, but at least I can do a quick fitting.
A new case, a bit more compact and less “open”:
This is a two part case for the Khadas Edge 2 SBC.
Two parts to print. A base(v11) and a cover(v13).
v13 now has screw holes that should work better with M2 screws.
The Edge2 mounts to the base with M2 standoffs (8mm, 5mm barrel, 3mm threads) and...
Genom
November 5, 2022, 9:08pm
4
The previous one (v13) worked well btw. Space tgo press buttons was a bit awkward, but otherwise no issues. I’llt ry the new cover later.
Great to hear. The first case was mainly so I could have something soonish. The second case is more enclosed and my current experience is that the fan turns on a little more frequently and is a little “louder” because of the way my louvers printed. I do prefer, however, the second (v2) case. I’m sure I’ll have a third design at some point.