VIM4-Android-11-64bit-V230621 Rom Release

[cadahl]

Thanks. The latest official build seems to work.

[OldNavi]

A small question here - in Vim3(s) on Android 9 - Android Open Accessory protocol seems to work… It even starts up Android Auto via Android HU emulator… (but fails later) But it seems is broken on Android 11… logs show that VIM4 supports AOAv2 ask VIM to switch to accessory mode but nothing actually happens…
Any chance to make it work back again ? (easy to reproduce via android auto emulator in Android Studio tools)

[goenjoy]

@OldNavi Can you create a new post? And describe the problem more clearly. And provide steps and methods for replication.

[antigua]

VIM 4 TS050
VIM4-Android-11-64bit-V230621 Rom Release

1. Logo flickering when booting(Only on TS0505 display)

2. flickering of the image until you raise the VBO brightness (only on the TS0505 display)

3. In the setup menu, the back button (at the top) does not work; there is an indication of pressing, but there is no reaction to pressing.
   In version vim4-android-11-64bit-v230428, the back button works.
   The back button in the bottom panel works.

4. On the TS0505 display, the resolution (4k) is incorrectly determined when changed to 1080, visually nothing changes.
   Resolution 1080 50\60 Hz in the settings is not saved after reboot.

5. The Settings/Display/Advansed/Display Size parameter is not saved when walking through the menu and can be freely reset to the default value.

[goenjoy]

@antigua

• Logo flickering when booting(Only on TS0505 display)
• flickering of the image until you raise the VBO brightness (only on the TS0505 display)

Perhaps your screen is malfunctioning. You can disconnect the screen and let it sit for a night before testing.

@antigua

In the setup menu, the back button (at the top) does not work; there is an indication of pressing, but there is no reaction to pressing.
In version vim4-android-11-64bit-v230428, the back button works.
The back button in the bottom panel works.

In the Settings app on Android, the back button in the top left corner of the screen doesn't work

Which version of system do you use? Khadas official images, self built images, or others? VIM4-Android-11-64bit-V230621 Please describe your issue below: Hello. The back button on the top action bar of the settings screen does not work. I can only go back by pressing the back button at the bottom. On older roms, the back button in the Settings app worked properly.

@antigua

• On the TS0505 display, the resolution (4k) is incorrectly determined when changed to 1080, visually nothing changes.
  Resolution 1080 50\60 Hz in the settings is not saved after reboot.
• The Settings/Display/Advansed/Display Size parameter is not saved when walking through the menu and can be freely reset to the default value.

The parameters such as mipi resolution cannot be changed. The corresponding setting inside is the HDMI display screen.

[Junu_M]

@In the Settings app on Android

Khadas official images

I am using the Khadas official images.
Only the v230621 image file is not working, the other versions are working fine, so I am using an older version. I am currently using the v23048 image file.

[antigua]

At first I thought so too, I replaced the display with a new one, but it didn’t help. I installed the firmware Version: vim4-android-11-64bit-v230428 and this defect disappeared. If you set VBO brightness to default, it looks like blurry text. I tested it on several different PCs and displays.

[antigua]

Yes, I am using the official firmware version
VIM4-Android-11-64bit-V230621 Rom Release but since there are some problems with the display, I had to install an older version of the firmware - vim4-android-11-64bit-v230428

[antigua]

yes, but Vim 3 defines it as 1080 and I have not observed any problems with resolution.