新买的vim3板子,插上串口线和电源线,串口打印 一直 循环启动,咋回事,
2B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02
…
secure task start!
high task start!
low task start!
run into bl31
NOTICE: BL31: v1.3(release):d9e1bbe85
NOTICE: BL31: Built : 19:07:43, Sep 7 2020
NOTICE: BL31: G12A normal boot!
NOTICE: BL31: BL33 decompress pass
ERROR: Error initializing runtime service opteed_fast
U-Boot 2015.01-g75547d1 (Jan 28 2021 - 10:46:26)
DRAM: 3.8 GiB
Relocation Offset is: d6d38000
…
…
Start read misc partition datas!
BCB hasn’t any datas,exit!
Hit Enter or space or Ctrl+C key to stop autoboot – : 0
cfgload: start …
cfgload: reading /boot.ini from mmc 0:1 …
card out
** Bad device mmc 0 **
cfgload: no /boot.ini or empty file on mmc 0:1
cfgload: reading /boot.ini from mmc 1:1 …
Failed to mount ext2 filesystem…
** Unrecognized filesystem type **
cfgload: no /boot.ini or empty file on mmc 1:1
cfgload: reading /boot/boot.ini from mmc 1:5 …
Failed to mount ext2 filesystem…
** Unrecognized filesystem type **
cfgload: no /boot/boot.ini or empty file on mmc 1:5
cfgload: failed to read boot.ini on all partitions!
CONFIG_SYSTEM_AS_ROOT: systemroot
system_mode: 1
active_slot: normal
avb2: 0
ee_gate_off …
avb2: 0
Booting Android Image at 0x03080000 …
Kernel command line: androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
[store]Is good fdt check header, no need decrypt!
active_slot is normal
load dtb from 0x1000000 …
find 1 dtbos
dtbos to be applied: 0
Apply dtbo 0
Loading Kernel Image(COMP_NONE) … OK
kernel loaded at 0x01080000, end = 0x01a27310
Loading Device Tree to 0000000009fe6000, end 0000000009fff7a7 … OK
fdt_fixup_memory_banks, reg:0000000000000000
Starting kernel …
uboot time: 2848434 us
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113-g6d4c1ee-dirty (terry@Server) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #9 SMP PREEMPT Thu Jan 28 11:14:58 CST 2021
[ 0.000000@0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000@0] CPU: div instructions available: patching division code
…
…
[ 5.412675@0] EXT4-fs (mmcblk0p18): mounted filesystem without journal. Opts: (null)
[ 5.417698@0] VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
[ 5.425165@0] devtmpfs: moG12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02
…
…
low task start!
run into bl31
NOTICE: BL31: v1.3(release):d9e1bbe85
NOTICE: BL31: Built : 19:07:43, Sep 7 2020
NOTICE: BL31: G12A normal boot!
NOTICE: BL31: BL33 decompress pass
ERROR: Error initializing runtime service opteed_fast
U-Boot 2015.01-g75547d1 (Jan 28 2021 - 10:46:26)
DRAM: 3.8 GiB
Relocation Offset is: d6d38000
…
…
一直是这样循环。。。