VIM3 Yocto SDK: DTB overlay (ltc2947) is not applied at boot, how to enable overlays?

Which system do you use? Android, Ubuntu, OOWOW or others?

Others: Yocto (Khadas Yocto SDK, vims-yocto-sdk)

Which version of system do you use? Please provide the version of the system here:

Khadas Yocto SDK: <repo/branch/commit> Kernel: 5.15.137 (mesong12b-kvim3-k5.15)

Please describe your issue below:

I want to use a DTB overlay (ltc2947.dtbo, an LTC2947 on I2C3 at 0x5c) on VIM3 with the Yocto SDK.

I placed the overlay and the env file in the rootfs under /boot, the same way the Khadas Doc: /boot/dtb/amlogic/kvim3.dtb.overlays/ltc2947.dtbo /boot/dtb/amlogic/kvim3.dtb.overlay.env (content: fdt_overlays= ltc2947)

The overlay is not applied. /sys/bus/i2c/devices/ has no 3-005c (only 3-0034, 4-xxxx).

Questions: 1. In the Yocto SDK, which component is supposed to read the overlay env file and apply the overlays? 2. Does the U-Boot in the SDK (v2015.01, kvim3_config) support overlays (fdt apply)? If so, where is it configured? 3. If not, what is the recommended way to enable DTB overlays in the Yocto SDK (patching U-Boot, or adding the node to the kernel DTS)?

Post a console log of your issue below:

root@yocto-vim3:~# ls /boot/dtb/amlogic/kvim3.dtb.overlays/
4k2k_fb.dtbo  disable-i2c3.dtbo  disable-ts050.dtbo  i2s.dtbo  ltc2947.dtbo  m2x-eth.dtbo
onewire.dtbo  os08a10.dtbo  panfrost.dtbo  pwm_f.dtbo  spdifout.dtbo  spi1.dtbo
uart3.dtbo  watchdog.dtbo

root@yocto-vim3:~# cat /boot/dtb/amlogic/kvim3.dtb.overlay.env
fdt_overlays= ltc2947

root@yocto-vim3:~# strings /boot/dtb/amlogic/kvim3.dtb.overlays/ltc2947.dtbo
fragment@0
__overlay__
okay
ltc2947@5c
adi,ltc2947
okay
__fixups__
/fragment@0:target:0
	target
status
compatible
i2c3

root@yocto-vim3:~# ls /sys/bus/i2c/devices/
3-0034  4-000c  4-000e  4-0018  4-0020  4-006c  i2c-3  i2c-4

root@kyocto-vim3:~# ls /boot
dtb  uEnv.txt

Hello @Berdo

Could you share your uboot boot log ?