The log as below:
To see full details build your kernel with:
‘make CONFIG_DEBUG_SECTION_MISMATCH=y’
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
LD init/built-in.o
KSYM .tmp_kallsyms1.o
KSYM .tmp_kallsyms2.o
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
OBJCOPY arch/arm64/boot/Image
Building modules, stage 2.
MODPOST 98 modules
make[1]: Leaving directory ‘/home/a311d/fenix/linux’
Info: Building debs…
Info: Building package: linux-u-boot-vim3-vendor
dpkg-deb: building package ‘linux-u-boot-vim3-vendor’ in ‘/home/a311d/fenix/build/images/.tmp/linux-u-boot-vim3-vendor_0.9.2-2015.01_arm64.deb’.
Info: Build gpu deb…
Info: Building package: linux-gpu-mali-fbdev
dpkg-deb: building package ‘linux-gpu-mali-fbdev’ in ‘/home/a311d/fenix/build/images/.tmp/linux-gpu-mali-fbdev_0.9.2-r12p0_arm64.deb’.
Info: Build board deb…
Image Name: A311D autoscript
Created: Wed Jul 15 10:58:41 2020
Image Type: AArch64 Linux Script (uncompressed)
Data Size: 8536 Bytes = 8.34 kB = 0.01 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 8528 Bytes = 8.33 kB = 0.01 MB
Image Name: Amlogic autoscript
Created: Wed Jul 15 10:58:41 2020
Image Type: AArch64 Linux Script (uncompressed)
Data Size: 804 Bytes = 0.79 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 796 Bytes = 0.78 kB = 0.00 MB
adding: aml_autoscript (deflated 70%)
adding: aml_autoscript.txt (deflated 75%)
/home/a311d/fenix
Info: Building package: linux-board-package-bionic-vim3
dpkg-deb: building package ‘linux-board-package-bionic-vim3’ in ‘/home/a311d/fenix/build/images/.tmp/linux-board-package-bionic-vim3_0.9.2_arm64.deb’.
Info: Build updater deb…
Info: Building package: fenix-updater-package-bionic-vim3-4.9
dpkg-deb: building package ‘fenix-updater-package-bionic-vim3-4.9’ in ‘/home/a311d/fenix/build/images/.tmp/fenix-updater-package-bionic-vim3-4.9_0.9.2_arm64.deb’.
Info: Build desktop deb…
Info: Building package: fenix-ubuntu-bionic-lxde-desktop
dpkg-deb: building package ‘fenix-ubuntu-bionic-lxde-desktop’ in ‘/home/a311d/fenix/build/images/.tmp/fenix-ubuntu-bionic-lxde-desktop_0.9.2_all.deb’.
Info: Building WiringPi packages…
Info: Building Kodi packages…
Makefile:7: recipe for target ‘all’ failed
make: *** [all] Error 1
make info
Version: 0.9.2
Current environment:
#KHADAS_BOARD=VIM3
#VENDOR=Amlogic
#CHIP=A311D
#LINUX=4.9
#UBOOT=2015.01
#DISTRIBUTION=Ubuntu
#DISTRIB_RELEASE=bionic
#DISTRIB_TYPE=lxde
#DISTRIB_ARCH=arm64
#INSTALL_TYPE=EMMC
===========================================
Any suggestion?