Which system do you use? Android, Ubuntu, OOWOW or others?
Ubuntu
Which version of system do you use? Please provide the version of the system here:
vim3-ubuntu-24.04-gnome-linux-5.15-fenix-1.7.4-250423.img
SD Card boot!!
Please describe your issue below:
When I flashed the Ubuntu image, there has been continuous output of “meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]”.
Post a console log of your issue below:
amlkey_init() enter!
amlkey_init() 59: already init!
[EFUSE_MSG]keynum is 1
[KM]Error:f[key_manage_query_size]L528:key[usid] not programed yet
mac address: c8:63:14:70:53:54
[KM]Error:f[key_manage_query_size]L528:key[deviceid] not programed yet
gpio: pin GPIOAO_7 (gpio 7) value is 1
saradc: 0x289, hw_ver: 0x32 (VIM3.V12)
Hardware version: VIM3.V12
normal power on
boot wol: disable
port mode is usb3.0
Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
pll tsensor avg: 0x2097, u_efuse: 0x8099
temp1: 41
ddr tsensor avg: 0x20cd, u_efuse: 0x808e
temp2: 43
device cool done
cfgload: start ...
cfgload: reading /boot.ini from mmc 0:1 ...
cfgload: no /boot.ini or empty file on mmc 0:1
cfgload: reading /boot/boot.ini from mmc 0:1 ...
cfgload: no /boot/boot.ini or empty file on mmc 0:1
cfgload: reading /boot.ini from mmc 1:1 ...
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
cfgload: no /boot.ini or empty file on mmc 1:1
cfgload: reading /boot/boot.ini from mmc 1:1 ...
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
cfgload: no /boot/boot.ini or empty file on mmc 1:1
cfgload: reading /boot/boot.ini from mmc 1:5 ...
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
cfgload: no /boot/boot.ini or empty file on mmc 1:5
cfgload: failed to read boot.ini on all partitions!
(Re)start USB...
USB0: USB3.0 XHCI init start
Register 3000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
USB device 0: unknown device
co-phase 0x2, tx-dly 0, clock 25000000
co-phase 0x2, tx-dly 0, clock 25000000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 25000000
init_part() 282: PART_TYPE_DOS
[mmc_init] mmc init success
switch to partitions #0, OK
mmc0 is current device
1 2
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
255 bytes read in 62 ms (3.9 KiB/s)
Ignoring unknown command: modprobe.blacklist=meson_gx_mmc
Retrieving file: /splash.bmp
[OSD]Display-bmp: 600 x 600 with 16777216 colors
[OSD]fb=0x000000007fc9c53c; bmap=0x000000000002008a, width=600, height= 600, lcd_line_length=5760, bmp_line_bytes=1800, fb_gdev.fb_width=1920, fb_gdev.fb_height=1080
[OSD]osd[0] enable: 1
1: Default
Enter choice: 1: Default
Retrieving file: /initrd.img
27702422 bytes read in 2655 ms (10 MiB/s)
Retrieving file: /Image
34945536 bytes read in 3273 ms (10.2 MiB/s)
Retrieving file: /dtb/amlogic/kvim3.dtb
110473 bytes read in 164 ms (657.2 KiB/s)
Retrieving file: /dtb/amlogic/kvim3.dtb.overlay.env
14 bytes read in 214 ms (0 Bytes/s)
WARNING: 'fdt_overlays_dir' neither in running nor in imported env!
MIPI LCD not exist, disable lcd & touch panel nodes.
Setup PCIe/USB3.0 mode to USB3.0.
Retrieving file: /uEnv.txt
540 bytes read in 75 ms (6.8 KiB/s)
Import user vars: /uEnv.txt 540 bytes
append: root=UUID=e0d56def-3709-4e5e-b0de-f0f214cdaf43 rootflags=data=writeback rw rootfstype=ext4 loglevel=4 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 scsi_mod.scan=async xhci_hcd.quirks=0x800000 gamma=0 hdr_policy=0 hdr_priority= otg_device=1 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 fb_width=1920 fb_height=1080 display_bpp=24 outputmode=none vout=none,disable panel_type=mipi_0 lcd_ctrl=0x00000086 lcd_debug=0x00000000 hdmitx=,444,8bit hdmimode=1080p60hz hdmichecksum=0x00000000 dolby_vision_on=0 frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=enforcing androidboot.firstboot=1 jtag= androidboot.hardware=amlogic androidboot.bootloader=01.01.241129.121407 androidboot.build.expect.baseband=N/A boot_source=sd ddr_size=2 reboot_mode=watchdog_reboot androidboot.serialno=1234567890 mac=c8:63:14:70:53:54 androidboot.mac=c8:63:14:70:53:54 hwver=VIM3.V12 wol_enable=0 console=ttyS0,115200 console=tty0 partition_type=generic pci=pcie_bus_perf fan=auto
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 20000000
Booting using the fdt blob at 0x20000000
remove env:hdr_policy=0
remove env:hdr_priority=
remove env:lcd_debug=0x00000000
remove env:dolby_vision_on=0
remove env:osd_reverse=0
reserving fdt memory region: addr=20000000 size=1b000
Loading Ramdisk to 70358000, end 71dc3496 ... OK
Loading Device Tree to 000000001ffe2000, end 000000001fffffff ... OK
fdt_fixup_memory_banks, reg:0000000000000000
Enable kaslr
Starting kernel ...
uboot time: 16894045 us
[ 0.000000][0 T0 ..] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000][0 T0 ..] 00000000 - 00080000, 512 KB, linux,dmc_monitor
[ 0.000000][0 T0 ..] 04f00000 - 05000000, 1024 KB, linux,iotrace
[ 0.000000][0 T0 ..] 04e00000 - 04f00000, 1024 KB, linux,defendkey
[ 0.000000][0 T0 ..] 3e800000 - 3f000000, 8192 KB, linux,meson-fb
[ 0.000000][0 T0 ..] 7ec00000 - 80000000, 20480 KB, linux,vdin1_cma
[ 0.000000][0 T0 ..] 76c00000 - 7ec00000, 131072 KB, linux,isp_cma
[ 0.000000][0 T0 ..] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000][0 T0 ..] 72c00000 - 76c00000, 65536 KB, linux,adapt_cma
[ 0.000000][0 T0 ..] 5d400000 - 70000000, 307200 KB, heap-gfx
[ 0.000000][0 T0 ..] 5bc00000 - 5d400000, 24576 KB, linux,ge2d_cma
[ 0.000000][0 T0 ..] 72c00000 - 72c00000, 0 KB, linux,ppmgr
[ 0.000000][0 T0 ..] 48800000 - 5bc00000, 315392 KB, linux,codec_mm_cma
[ 0.000000][0 T0 ..] Virtual kernel memory layout:
[ 0.000000][0 T0 ..] modules : 0xffffffc000000000 - 0xffffffc008000000 ( 128 MB)
[ 0.000000][0 T0 ..] vmalloc : 0xffffffc008000000 - 0xfffffffdf0000000 ( 247 GB)
[ 0.000000][0 T0 ..] .text : 0xffffffd608010000 - 0xffffffd608fc0000 ( 16064 KB) 0x10000
[ 0.000000][0 T0 ..] .rodata : 0xffffffd608fc0000 - 0xffffffd6099b0000 ( 10176 KB) 0xfc0000
[ 0.000000][0 T0 ..] .init : 0xffffffd6099b0000 - 0xffffffd609c80000 ( 2880 KB) 0xfc0000
[ 0.000000][0 T0 ..] .data : 0xffffffd609c80000 - 0xffffffd60a163a00 ( 5007 KB) 0x1c80000
[ 0.000000][0 T0 ..] .bss : 0xffffffd60a164000 - 0xffffffd60a2f63c1 ( 1609 KB) 0x2164000
[ 0.000000][0 T0 ..] fixed : 0xfffffffdfdbf9000 - 0xfffffffdfe000000 ( 4124 KB)
[ 0.000000][0 T0 ..] PCI I/O : 0xfffffffdfe800000 - 0xfffffffdff800000 ( 16 MB)
[ 0.000000][0 T0 ..] vmemmap : 0xfffffffe00000000 - 0xffffffff00000000 ( 4 GB maximum)
[ 0.000000][0 T0 ..] 0xfffffffe00000000 - 0xfffffffe02000000 ( 32 MB actual)
[ 0.000000][0 T0 ..] memory : 0xffffff8000000000 - 0xffffff8080000000 ( 2048 MB) 0x0
[ 0.000000][0 T0 ..] offset : 0x1600010000
[ 0.000000][0 T0 ..] [freertos]: rtos_reserved device node find error
[ 1.539959][3 T1 ..] slab_trace_module_init, create slabtrace failed
[ 3.130822][5 T135 ..] [memory-debug]: DMC DEBUG MEMORY ENABLED: range:0-7ffff, device=ff3ffe, debug=11d
[ 3.134883][5 T135 ..] [memory-debug]: range:00000000 - 0007ffff, device:ff3ffe
[ 3.143586][1 T135 ..] [memory-debug]: call ramdump_init() ret=-19
[ 3.200596][1 T136 ..] [mailbox]: mbox_pl_parse_dt 13
[ 3.226034][1 T150 ..] [efuse-unifykey]: can't get efuse_pattern_size, use default size0x400
[ 3.229052][1 T150 ..] efuse efuse: can't get reg resource
[ 3.234831][1 T150 ..] [efuse-unifykey]: failed to find match efuse key
[ 3.301733][3 T145 d.] genirq: Setting trigger mode 3 for irq 75 failed (meson_gpio_irq_set_type+0x0/0x170 [amlogic_gpio])
[ 3.314885][0 T0 dh] meson-gx-mmc ffe05000.sd: 5 [0x0], TIMEOUT[0x2800]
[ 3.317154][0 T0 dh] meson-gx-mmc ffe05000.sd: 5 [0x0], TIMEOUT[0x2800]
[ 3.324218][0 T0 dh] meson-gx-mmc ffe05000.sd: 5 [0x0], TIMEOUT[0x2800]
[ 3.331237][0 T0 dh] meson-gx-mmc ffe05000.sd: 5 [0x0], TIMEOUT[0x2800]
[ 3.379688][3 T136 ..] adc_keypad adc_keypad: Not find mbox channel byidx
[ 3.381018][3 T136 ..] [input]: mbox chan is NULL
[ 3.574443][2 T130 ..] now in codec_mm_module_init
[ 3.575361][2 T130 ..] [tee]: tee_protect_mem open context failed
[ 3.584323][2 T130 ..] error: vout_meas_ctrl_init_dft: get vdin_meas_clk err!
[ 3.594788][2 T130 ..] [hdmitx:] *ERROR* UNKNOWN cs 4
[ 3.594849][2 T130 ..] Error getting FEAT_DISABLE_HDMI_60HZ: 101
[ 3.601124][2 T130 ..] Error getting FEAT_DISABLE_OUTPUT_4K: 101
[ 3.606917][2 T130 ..] Error getting FEAT_DISABLE_HDCP_TX_22: 101
[ 3.613309][2 T130 ..] Error getting FEAT_DISABLE_HDMI_TX_3D: 101
[ 3.619487][2 T130 ..] Error getting FEAT_DISABLE_HDMITX: 101
[ 3.630089][2 T130 ..] error: dummy_venc_clktree_probe: ret=0x8
[ 3.631524][2 T130 ..] vout: error: aml_vout_get_dt_info: can't get vsync irq
[ 3.638898][2 T130 ..] [hdmitx:] *ERROR* hdmitx_validate_vmode validate none fail
[ 3.646096][2 T130 ..] vout: error: no matched vout_init mode none, force to invalid
[ 3.653959][2 T130 ..] vout: error: vout1: vout_func_set_vmode: current_server is NULL
[ 3.662009][2 T130 ..] vout: error: init mode invalid set error
[ 3.674188][2 T130 ..] amlogic_heap_secure_dma_buf_init: heap-secure not added in dts.
[ 3.678845][2 T130 ..] [freertos]: rtos_reserved device node find error
[ 3.687526][4 T130 ..] vdin0 get fclk_div5 err
[ 3.688111][4 T130 ..] vdin_drv_probe: vdin0 cannot get msr clk !!!
[ 3.694493][4 T130 ..] vpu: vpu: error: vpu_vmod_mem_pd_get: invalid vpu mod: 72
[ 3.702686][4 T130 ..] vdin1 get fclk_div5 err
[ 3.706647][4 T130 ..] vdin_drv_probe: vdin1 cannot get msr clk !!!
[ 3.714384][4 T130 ..] create amvideo_poll attribute (null) fail
[ 3.722425][3 T130 ..] video_composer_module_init_1
[ 3.740701][5 T130 ..] no match support_4k for amlvideo2.0, disable as default
[ 3.742500][5 T130 ..] don't find codec_mm_alloc, use default parm.
[ 3.749172][2 T130 ..] no match support_4k for amlvideo2.1, disable as default
[ 3.756435][2 T130 ..] don't find codec_mm_alloc, use default parm.
[ 3.764898][3 T130 ..] di_multi multi-di: IRQ aisr_irq not found
[ 3.769239][3 T130 ..] vpu: vpu: error: vpu_vmod_mem_pd_get: invalid vpu mod: 72
[ 3.778421][4 T130 ..] cectx ff80023c.aocec: mbox_request_channel_byname() requires an "mbox-names" property
[ 3.786385][4 T130 ..] cectx ff80023c.aocec: Not find mbox channel byname
[ 3.797752][5 T130 ..] [freertos]: rtos_reserved device node find error
[ 3.829874][5 T63 ..] mbox chan is NULL
[ 3.829909][5 T63 ..] mbox chan is NULL
[ 3.846329][2 T130 ..] [thermal]: thermal: register cpucore failed
[ 3.847097][2 T130 ..] [thermal]: thermal: register cpucore failed
[ 3.853523][2 T130 ..] [thermal]: thermal: read num_of_pp failed
[ 3.868997][3 T136 ..] [usb]: call amlogic_new_c2_usb2_v2_driver_init() ret=-1
[ 3.870966][3 T136 ..] [usb]: call amlogic_new_c2_usb3_v2_driver_init() ret=-1
[ 3.878386][3 T136 ..] [usb]: call amlogic_cc_driver_init() ret=-1
[ 3.884465][3 T136 ..] [usb]: call amlogic_bc_driver_init() ret=-1
[ 3.891288][3 T136 ..] amlogic-new-usb3-v2 ffe09080.usb3phy: This is normal phy
[ 3.898663][3 T136 ..] amlogic-new-usb3-v2 ffe09080.usb3phy: Failed to get pcie_bgp
[ 3.907270][3 T136 ..] amlogic-new-usb2-v2 ffe09000.usb2phy: Not usb-phy-trim-reg
[ 3.913689][3 T136 ..] amlogic-new-usb2-v2 ffe09000.usb2phy: Not usb-phy-trim-reg
[ 3.924351][3 T136 ..] amlogic-new-usb2-v2 ffe09000.usb2phy: Not usb-phy-trim-reg
[ 3.928954][3 T136 ..] amlogic-new-usb2-v2 ffe09000.usb2phy: Not usb-phy-trim-reg
[ 3.942748][4 T145 ..] g12a-mdio_mux ff64c000.mdio-multiplexer: wzh failed to get ethrmii clock
[ 3.951976][1 T8 ..] g12a-mdio_mux ff64c000.mdio-multiplexer: wzh failed to get ethrmii clock
[ 3.952283][5 T150 ..] [drm:meson_of_init [aml_drm]] *ERROR* osd_ver parser failed, need fix it!!
[ 3.964269][5 T150 ..] [drm:meson_of_init [aml_drm]] *ERROR* osd_axi_sel parser failed and set default 0
[ 3.974441][5 T150 ..] [hdmitx:] *ERROR* meson_hdmitx_bind hdmi [0]
[ 3.980979][5 T150 ..] meson_dummyl_bind dummyl[0]
[ 3.985735][2 T133 ..] meson8b-dwmac ff3f0000.ethernet: Not find mbox channel byidx
[ 3.986392][4 T8 ..] g12a-mdio_mux ff64c000.mdio-multiplexer: wzh failed to get ethrmii clock
[ 4.002000][5 T150 ..] [drm:meson_hdmitx_get_modes [aml_drm]] *ERROR* get vic_list from hdmitx dev return 0.
[ 4.012234][5 T150 ..] [drm:meson_hdmitx_get_modes [aml_drm]] *ERROR* get vic_list from hdmitx dev return 0.
[ 4.197993][4 T150 ..] [drm:meson_hdmitx_get_modes [aml_drm]] *ERROR* get vic_list from hdmitx dev return 0.
[ 4.203329][4 T150 ..] [drm:meson_hdmitx_get_modes [aml_drm]] *ERROR* get vic_list from hdmitx dev return 0.
[ 4.255118][3 T209 ..] [drm:meson_osd_plane_async_check [aml_drm]] *ERROR* plane visible state changed.
[ 10.232302][4 T409 ..] probe iq_dev for sensor: os08a10
[ 10.245250][2 T8 ..] [wireless]: request_irq error ret=-22
[ 10.247282][2 T8 ..] [wireless]: dev_pm_set_wake_irq failed: -22
[ 11.058840][3 T440 ..] config sensor os08a10 driver.
[ 11.060654][3 T440 ..] soc_sensor_probe: failed to get sensor name sub
[ 11.067023][3 T440 ..] config sensor sub imx290sub driver.
[ 11.073922][3 T440 ..] DEBUG: init mclock is 24 MHZ
[ 11.078332][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.085643][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.095693][2 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.103838][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.108707][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.124674][4 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.128996][4 T440 ..] DEBUG: init mclock is 24 MHZ
[ 11.138896][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.146286][4 T440 ..] system_i2c_init:success to add i2c driver
[ 11.148956][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.156765][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.164220][2 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.171499][2 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.179576][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.184028][3 T440 ..] system_i2c_init:success to add i2c driver
[ 11.190428][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.199102][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.205241][3 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.211992][3 T440 ..] cannot get mclk_0 clk
[ 11.217055][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.222281][3 T440 ..] system_i2c_init:success to add i2c driver
[ 11.228766][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.236210][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.243841][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.251108][5 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.257863][5 T440 ..] DEBUG: platform is G12B
[ 11.257898][5 T440 ..] DEBUG: init mclock is 24 MHZ
[ 11.258210][3 T449 ..] dw9714 4-000c: CY: success probe dw9714
[ 11.263126][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.279310][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.285627][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.293250][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.300703][3 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.308136][4 T440 ..] DEBUG: cannot get 24m clk
[ 11.311885][4 T440 ..] set mclk fail
[ 11.316301][2 T440 ..] set reset fail
[ 11.319573][2 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.325487][2 T440 ..] system_i2c_init:success to add i2c driver
[ 11.331890][2 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.339372][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.346601][4 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.353347][4 T440 ..] DEBUG: cannot get 24m clk
[ 11.357981][4 T440 ..] set mclk fail
[ 11.362426][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.367672][3 T440 ..] system_i2c_init:success to add i2c driver
[ 11.374010][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x10
[ 11.381622][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x10
[ 11.388887][3 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.396454][5 T440 ..] cannot get mclk_0 clk
[ 11.400661][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.405944][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.412275][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.419857][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.427281][3 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.434549][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.439640][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.446029][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.453638][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.460935][5 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.467656][5 T440 ..] DEBUG: cannot get 24m clk
[ 11.472299][5 T440 ..] set mclk fail
[ 11.476849][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.482124][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.488334][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.488406][3 T8 ..] mali ffe40000.bifrost: No OPPs found in device tree! Scaling timeouts using 100000 kHz
[ 11.495984][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.513899][4 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.520820][4 T440 ..] DEBUG: cannot get 24m clk
[ 11.524728][4 T440 ..] set mclk fail
[ 11.529158][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.534330][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.540689][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.548473][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.555564][5 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.557089][2 T449 ..] snd_spdif ff642000.audiobus:spdif: Can't retrieve suspend-clk-off
[ 11.563458][3 T440 ..] DEBUG: cannot get 24m clk
[ 11.575349][5 T440 ..] set mclk fail
[ 11.575571][2 T449 ..] snd_spdif ff642000.audiobus:spdif_b: Can't retrieve suspend-clk-off
[ 11.579681][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.593391][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.596289][2 T449 ..] snd_tdm ff642000.audiobus:tdma: Can't retrieve suspend-clk-off
[ 11.600075][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.607403][2 T449 ..] snd_tdm ff642000.audiobus:tdma: Can't get clk_src_cd
[ 11.616028][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.622440][2 T449 ..] snd_tdm ff642000.audiobus:tdmb: Can't retrieve suspend-clk-off
[ 11.637707][2 T449 ..] snd_tdm ff642000.audiobus:tdmb: Can't get clk_src_cd
[ 11.644745][4 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.645014][2 T449 ..] snd_tdm ff642000.audiobus:tdmc: Can't retrieve suspend-clk-off
[ 11.652376][4 T440 ..] DEBUG: cannot get 24m clk
[ 11.659341][2 T449 ..] snd_tdm ff642000.audiobus:tdmc: Can't get clk_src_cd
[ 11.664065][4 T440 ..] set mclk fail
[ 11.675700][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.675906][2 T449 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 11.692092][2 T449 ..] [snd-soc]: aml_card_probe error ret:-517
[ 11.694168][0 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 11.709994][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.715159][0 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 11.722310][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.723392][2 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 11.741159][2 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 11.747179][2 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x1a
[ 11.759298][2 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.788895][3 T440 ..] DEBUG: cannot get 24m clk
[ 11.790651][3 T440 ..] set mclk fail
[ 11.790735][3 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.799750][3 T440 ..] system_i2c_init:success to add i2c driver
[ 11.800162][4 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 11.800170][4 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 11.800213][4 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.800638][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x30
[ 11.800690][5 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.825891][5 T440 ..] DEBUG: cannot get 24m clk
[ 11.844847][5 T440 ..] set mclk fail
[ 11.853399][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.859428][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.859940][5 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 11.859948][5 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 11.860324][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.860748][5 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.860863][5 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.862204][3 T440 ..] DEBUG: cannot get 24m clk
[ 11.909520][5 T440 ..] set mclk fail
[ 11.914140][5 T440 ..] arm_sensor_i2c_probe: start to probe
[ 11.919067][2 T524 ..] [drm:meson_osd_plane_async_check [aml_drm]] *ERROR* plane visible state changed.
[ 11.919289][5 T440 ..] system_i2c_init:success to add i2c driver
[ 11.919663][3 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 11.919670][3 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 11.919753][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.920180][3 T440 ..] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
[ 11.920236][3 T440 ..] arm_sensor_i2c_remove: DEBUG: remove i2c sensor
[ 11.988748][4 T525 ..] [drm:meson_osd_plane_async_check [aml_drm]] *ERROR* plane visible state changed.
[ 12.144097][3 T534 ..] [drm:meson_osd_plane_async_check [aml_drm]] *ERROR* plane visible state changed.
[ 12.160032][4 T535 ..] [drm:meson_osd_plane_async_check [aml_drm]] *ERROR* plane visible state changed.
[ 12.605005][3 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 12.614773][3 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 12.856537][3 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 12.865822][3 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 12.999641][4 T438 ..] Amlogic A/V streaming port init
[ 13.017086][1 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 13.031985][1 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 13.142262][3 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 13.157771][3 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 13.185372][4 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 13.201189][4 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 13.340734][2 T8 ..] asoc-aml-card auge_sound: aml_card_dai_link_of, error dai-link idx:0, error getting codec dai, ret -517
[ 13.352333][2 T8 ..] [snd-soc]: aml_card_probe error ret:-517
[ 13.374109][2 T8 ..] asoc-aml-card auge_sound: IRQ audio_exception64 not found
[ 13.435232][4 T445 ..] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.34 (wlan=r892223-20230904-2)(20240912-1)
[ 13.435232][4 T445 ..] drivers/net/wireless/bcmdhd compiled on Nov 29 2024 at 17:37:06
[ 13.435232][4 T445 ..]
[ 13.685986][0 T0 dh] meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 22.477671][0 T0 dh] meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 24.469917][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 24.479068][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:476ms, cnt:82740, last_exec_time:6us
[ 25.469919][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:46
[ 25.479089][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:466ms, cnt:81197, last_exec_time:6us
[ 28.469930][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 28.479255][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:474ms, cnt:82609, last_exec_time:5us
[ 32.074217][0 T0 dh] meson-gx-mmc ffe03000.sdio: 53 [0xa5000000], CRC[0x2100]
[ 32.293664][0 T0 dh] meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 34.485843][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 34.495264][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:475ms, cnt:82803, last_exec_time:5us
[ 36.485855][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 36.495323][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:475ms, cnt:82866, last_exec_time:5us
[ 41.823850][0 T0 dh] meson-gx-mmc ffe03000.sdio: 53 [0xa5000000], CRC[0x2100]
[ 41.830874][0 T369 dh] meson-gx-mmc ffe03000.sdio: 52 [0x800], TIMEOUT[0x2800]
[ 42.057674][0 T0 dh] meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 42.492956][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:16
[ 42.502432][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:160ms, cnt:21227, last_exec_time:5us
[ 44.253823][2 T0 dh] [debug]: IRQRatio___ERR.irq:2/IPI action=ipi_handler ratio:2
[ 44.257948][2 T0 dh] [debug]: period_time:1000ms isr_sum_time:26ms, cnt:24534, last_exec_time:1us
[ 44.492963][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:46
[ 44.502532][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:466ms, cnt:81510, last_exec_time:5us
[ 45.455410][3 T0 dh] [debug]: IRQRatio___ERR.irq:2/IPI action=ipi_handler ratio:2
[ 45.459572][3 T0 dh] [debug]: period_time:1000ms isr_sum_time:26ms, cnt:24372, last_exec_time:1us
[ 45.492965][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:45
[ 45.502640][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:458ms, cnt:80058, last_exec_time:5us
[ 46.492968][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:46
[ 46.502748][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:465ms, cnt:81099, last_exec_time:5us
[ 47.492971][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:46
[ 47.502821][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:465ms, cnt:81225, last_exec_time:5us
[ 51.590837][0 T0 dh] meson-gx-mmc ffe03000.sdio: 53 [0xa5000000], CRC[0x2100]
[ 51.813667][0 T0 dh] meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 52.502394][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:27
[ 52.512267][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:274ms, cnt:42165, last_exec_time:5us
[ 55.502407][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 55.512416][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:474ms, cnt:82736, last_exec_time:5us
[ 57.502414][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 57.512536][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:473ms, cnt:82520, last_exec_time:5us
[ 61.343676][0 T369 dh] meson-gx-mmc ffe03000.sdio: 52 [0x800], TIMEOUT[0x2800]
[ 61.565671][0 T0 dh] meson-gx-mmc ffe03000.sdio: 8 [0x1aa], TIMEOUT[0x2800]
[ 63.557899][0 T0 dh] [debug]: IRQRatio___ERR.irq:60/ffe03000.sdio action=meson_mmc_irq [amlogic_mmc] ratio:47
[ 63.568074][0 T0 dh] [debug]: period_time:1000ms isr_sum_time:474ms, cnt:82838, last_exec_time:5us
[ 63.905975][3 T0 dh] [debug]: IRQRatio___ERR.irq:2/IPI action=ipi_handler ratio:2