[ROM] SC VIM3 Pie "Normal" Debug Build v8 20211122

Hi there guys and girls, one more rom/fw for you all!
Many thks to Khadas for sending me the device to play
And many thks to @Robert for be my beta tester :wink:
Ok guys im going to write the max i remember i did on sdkā€¦ i canā€™t remember all of it!
Build from Latest source.
Debug Build ( i might do in the future a rls build with my own keys )
I also added my layout(in zip format in internal storage) for squarehome3, is not hard to import it, i will make a video on how to do it in the next daysā€¦ or just search youtube i bet there is something explaining it!

READ RECOMMENDATIONS BELLOW!!!

IF YOU HAVE TO MANY ISSUES IN THE BUILD AFTER FLASH EVEN IF THE FLASH WENT OK, JUST REFLASH AGAIN THE IMG BECAUSE YOU GOT A BAD FLASH EVEN IF IT SAID IT WAS OK.


Changelog v8:

  • Merge latest change from tree
  • Added a white box to show actual screen size when resizing the screen!
  • Did some audio passthrough changes/fixes!
  • Fixed dual-boot it was broken, now coreelec/others boots fine from sdcard.
  • Fixed TWRP boot, and added it by default on the build.
  • Added mpeg-L2 audio support (i did not test soā€¦ it might work or not)
  • Removed dovi! (not working due to be locked to certain chips)
  • SD to HDR disabled by default now!
  • Enabled again deep sleep!
  • Some cleaning etcā€¦

Recommendations:

  • I do recommend if you guys have issues playing some Dolby Digital audio, to go to ā€œsettings->Device Preferences->Soundā€, and in there in ā€œSelect formatsā€ set it to ā€œManual:Select which formats to useā€, and them just manually enable all formats.
  • This is because there is an few issues how the sdk detects the formats being used in some videos with Dolby Digital audio, remember this will not mean you will have DTS-HD support or even Dolby Atmos, since the required libs are not there to have that support!
  • I also recommend on both builds to disable the ā€œDNRā€ and also play with the ā€œPicture Modeā€, for that go to ā€œsettings->Advanced Settings->Pictureā€.

Bugs?:

  • Of course there is bugsā€¦ there always be bugsā€¦

Want to buy me a beer?


Download SC v8 IMGā€™s:


OLD Buildā€™s IMGā€™s:


Install instructions:

  • Use usb burning tool to burn the IMG.
  • More information on how to put the device in flash mode refer to khadas wiki!

THIS ROM DELETES ALL YOUR DATA SO DO A BACKUP!

USE AT YOUR OWN RISK!

Enjoy it :slight_smile:

12 Likes

wellā€¦ here is a report on what i done this last days from the TODO list.

  • Remove 1. boot pair remote page. - > Done
  • Add support for more remotes to wake up from poweroff/sleep to uboot. -> Added 2 more.
  • Fix Vulkan support. -> Fixed
  • Fix Navigation Bar and status bar. -> Fixed
  • Add long press menu button to hide/show navigation bar. -> Done
  • And other stuff i canā€™t remember nowā€¦ -> A few other minor stuff!
4 Likes

Updated 1Āŗ post with ā€œFinalā€ (for now of course), read changelog for changesā€¦

3 Likes

It seems that online doc needs update these two links(Linux and Android).

@alcohol The Third Party Firmware is in there.The first one is Android TV.

Hi @Frank , ye they are wrong is linked to this rom, this one is regular android.
The AndroidTV one is in another topic here in VIM3 section.
I posted 2 roms :wink:

2 Likes

Hi @superceleron, thanks for the rom! Just got my VIM board (VIM 3 V12) recently and was looking forward to giving this a try.
Iā€™m struggling to flash it, though. Iā€™m using USB burning tool 2.1.7.3 and canā€™t get past 3% ([0x10303004]Romcode/Switch status/Identify/Error result). No luck using an SD card and burn card maker either: I lose output signal almost immediately after it starts updating, unless I donā€™t erase the bootloader where it completes installing but then I get no output signal on reboot. Same issue with the Beta1 image. Validated the checksum on both images, everything seems fine there.
That said, I have no problem flashing it with the stock Pie rom with the same setup.
I wonder if anyone else is having (had) a similar issue?

Hello, I had no issues flashing SCā€™s VIM3 ROM, went straight in using USB Burning Tool.
I erased eMMC prior to the burn.

Weird, no issues whatsoever here, and i already burn like 80x lol

i have the same problem.
([0x10303004]Romcode/Switch status/Identify/Error result).
no solution?

Not sure it would matter, but did you erase the eMMC prior to flashing? I am not referring to settings in the USB Burning Tool, but actually erasing eMMC as described here.

1 Like

I tried erasing the eMMC (using Interrupt Mode, rebooted to confirm) and still had the same issue. Will look at it further today, no solution yet. Any suggestions (no matter how simple) are welcome.
This is the full error log for reference:

[10:50:33 514][HUB1-5][Inf]ā€“Download BL2
[10:50:33 514][HUB1-5]Aml_Libusb_bl2_boot2 start!
[10:50:33 518][HUB1-5]sequence= 0, datasize= 16384, fipOffset= 65536
[10:50:33 525][HUB1-5]sequence= 1, datasize= 49152, fipOffset= 393216
[10:50:33 531][HUB1-5]sequence= 2, datasize= 16384, fipOffset= 229376
[10:50:33 540][HUB1-5]sequence= 3, datasize= 49152, fipOffset= 245760
[10:50:33 559][HUB1-5]sequence= 4, datasize= 16384, fipOffset= 65536
[10:50:33 566][HUB1-5]sequence= 5, datasize= 49152, fipOffset= 393216
[10:50:33 571][HUB1-5]sequence= 6, datasize= 16384, fipOffset= 229376
[10:50:33 581][HUB1-5]sequence= 7, datasize= 49152, fipOffset= 245760
[10:50:33 618][HUB1-5]sequence= 8, datasize= 16384, fipOffset= 65536
[10:50:33 625][HUB1-5]sequence= 9, datasize= 49152, fipOffset= 393216
[10:50:33 632][HUB1-5]sequence= 10, datasize= 16384, fipOffset= 229376
[10:50:33 641][HUB1-5]sequence= 11, datasize= 49152, fipOffset= 245760
[10:50:33 659]BL2 report Error, code= 32
[10:50:33 659][HUB1-5]cmd error, cmdType:43984
[10:50:33 659][HUB1-5]Aml_Libusb_bl2_boot2 end!
[10:50:33 659][HUB1-5][Inf]ā€“Release Semaphore
[10:50:43 773][HUB1-5][Inf]ā€“Detect Device remove timeout
[10:50:43 773][HUB1-5][Inf]ā€“Device is connected
[10:50:43 773][HUB1-5][Inf]ā€“Close device handle 0x00000914
[10:50:43 824][HUB1-5][Inf]ā€“Open device handle \?\usb#vid_1b8e&pid_c003#5&350590a7&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000bf4
[10:50:48 877][HUB1-5][Inf]ā€“0-0-1-8
[10:50:48 877][HUB1-5][Err]ā€“CheckFileRunState failed
[10:50:48 891][HUB1-5][Err]ā€“[0x10303004]Romcode/Switch status/Identify/Error result
[10:50:48 891][HUB1-5][Inf]ā€“Close device handle 0x00000bf4

well, is the same errorā€¦
I can install this Android pie
https://dl.khadas.com/Firmware/VIM3/Android/VIM3_Pie_V190809.7z

the sistem is like the first dayā€¦ not avanced, but not briked at all :slight_smile:

@Terry did you guys change the uboot from this VIM3_Pie_V190809.7z to previous builds?
Because it looks like yes, because the ā€œ[0x10303004]Romcode/Switch status/Identify/Error resultā€ only happens when uboot was changed, i notice you guys are now using another branch tree because the one i used is ā€œkhadas-vim3-pieā€ and now i see one new in there ā€œkhadas-vims-pieā€ā€¦

1 Like

No, I donā€™t change the uboot from VIM3_Pie_V190809.7z to previous builds. I havenā€™t release new ROM with the branch ā€œkhadas-vims-pieā€.

1 Like

I will release new ROM with the branch ā€œkhadas-vims-pieā€ in next week.:grinning:

2 Likes

andā€¦ Android TV ?
[[ROM] SC VIM3 Pie ATV BETA1 20190810]
not work

1 Like

hmm ok thks @Terry can you plz try to flash any of my roms in a v1.2 VIM3?

1 Like

Ok, I will try later. :smiley:

1 Like

The network is so slow :joy:

2 Likes