Oled Display connection to VIM GPIO

Hardware and Peripherals
1

Hi.

I would like to connect this OLED display to VIM but i am not sure with the GPIO PINOUT.

can you help me please:

OLED Display PIN NUMBER-------------------------------------------------------VIM GPIO PIN NUMBER

1.GND: Power ground
2.VDD:2.8-5.5V power supply
3.SCK: CLK clock
4.SDA: MOSI data
5.RES: Reset
6.DC: data / command
7.CS: chip-select signal

https://www.ebay.com/itm/163618587886

2

Hi Eli
Can you provide the document of the OLED display? It’s needed for advise.

Have fun!

3

Item Description：

1.Size:1.3 inch
2.Resolution:12864
3.Controlling Chip:SSH1106
4.Display Area:29.4214.7mm
5.Driving Voltage:3.3-5V
6.Operating Temperature:-40~70 celsius
7.Interface Type:IIC
8.Light Color: white
Pin Definition:

1.GND:power ground
2.VCC:power positive
3.SCL:clock wire
4.SDA:data wire

4

if possible i would like to connect this bigger display:

5

The OLED support both SPI or I2C interface, but actually, VIM1 only support I2C, so ensure the OLED connect to the I2C pins, any IO will work for signals like Reset, CS.

Have fun!

6

so you can you please help me MAP the PINS for the 2 display models?
Diagonal Screen Size: 2.42"

Resolution: 128 * 64

Driver IC: SSD1309

SPI interface definition:

1.GND (power ground) ------------------------ VIM2 PIN Number?

2.VCC (power supply positive) ------------------------ VIM2 PIN Number?

3.SCL (clock line) ------------------------ VIM2 PIN Number?

4.SDA (data line) ------------------------ VIM2 PIN Number?

5.RES (reset line) ------------------------ VIM2 PIN Number?

6.DC (data / command) ------------------------ VIM2 PIN Number?

7.CS (chip select) ------------------------ VIM2 PIN Number?

1.Size:1.3 inch
2.Resolution:12864
3.Controlling Chip:SSH1106
4.Display Area:29.4214.7mm
5.Driving Voltage:3.3-5V
6.Operating Temperature:-40~70 celsius
7.Interface Type:IIC
8.Light Color: white
Pin Definition:

1.GND:power ground ------------------------ VIM2 PIN Number?
2.VCC:power positive ------------------------ VIM2 PIN Number?
3.SCL:clock wire ------------------------ VIM2 PIN Number?
4.SDA:data wire ------------------------ VIM2 PIN Number?
Package Included: 1PC*1.3" White/Blue OLED LCD Display Module IIC I2C Interface 128x64 3-5V For Arduino

7

1.GND:power ground ------------------------ VIM2 PIN 28
2.VCC:power positive ------------------------ VIM2 PIN 27
3.SCL:clock wire ------------------------ VIM2 PIN 25
4.SDA:data wire ------------------------ VIM2 PIN 26

8

Gouwa thx, can you fill in the above 7 pins?

9

FYI:
1.GND (power ground) ------------------------ VIM2 PIN 28
2.VCC (power supply positive) ------------------------ VIM2 PIN 27
3.SCL (clock line) ------------------------ VIM2 PIN 25
4.SDA (data line) ------------------------ VIM2 PIN 26
5.RES (reset line) ------------------------ VIM2 PIN 6
6.DC (data / command) ------------------------ VIM2 PIN 7
7.CS (chip select) ------------------------ VIM2 PIN 8

1 Like