NPU Demo and source code

[Frank]

@RichardG You can refer to those docs.

How to Train Yolo Model on Darknet

How To Transform Yolo Model

Darknet Install and configure Documents

[RichardG]

Hi
I am able to train Yolo on intel / linux / nvidia platform.
I am able to modify darknet also image.c
I am able to download demo binaries and run the picture demo.
but after downloading https://gitlab.com/khadas/aml_npu_app
i want to modify the khadas demo to accept rtsp input
but I cant make the sources.
Any advise will be greatly appreciated.

https://youtu.be/jkMlSN06iQ0 inline display

[Frank]

@RichardG You need to Application for DDK by email.

[RichardG]

ok email application sent

[RichardG]

how did you modify and compile the source code?
appreciate any advise.
thanks

[RichardG]

Have applied a few days back, pls respond.
Need to get the 5 TOP npu working urgently
thanks

[Frank]

@RichardG Sorry for that . We will check it. Maybe it’s an automated response .
What is your email address. @tsangyoujun can reply to you manually.

[RichardG]

thanks
richard@optasia.com.sg

[Frank]

@tsangyoujun Please help him . THX

[tsangyoujun]

Yes already PMed him

[leemgs]

It’s weird. Anyone that ran the inception_v3 example successfully? How did you enable /dev/galcore (device node file) to run the inception_v3 (ELF file)?

khadas@Khadas:~/mywork/aml_npu_demo_binaries/inceptionv3/VIM3$ ./run.sh
[ 1] Failed to open device: No such file or directory, Try again…
[ 2] Failed to open device: No such file or directory, Try again…
[ 3] Failed to open device: No such file or directory, Try again…
[ 4] Failed to open device: No such file or directory, Try again…
[ 5] _OpenDevice(1205): FATAL: Failed to open device, errno=No such file or directory.

[numbqq]

@leemgs Please follow the first post to install the packages

NPU Demo and source code

There are some ready to use NPU demo binaries for VIM3/VIM3L. This documentation is about how to run these demos on VIM3/VIM3L. Prepare You need to run Ubuntu image V20190830 on board, and update the system. Note: If the image is V20191231 or newer, you don’t need to do this anymore. khadas@Khadas:~$ sudo apt-get update khadas@Khadas:~$ sudo apt-get upgrade khadas@Khadas:~$ sudo apt-get install -y gstreamer1.0-libav gstreamer1.0-plugins-bad gstreamer1.0-tools gstreamer1.0-plugins-base gstrea…

[sharbob]

hello，how to compile the demo in aml_npu_app，I want to change the camera，but I can’t compile the source code success。that shows:“aarch64-linux-gnu/bin/ld: can not find -lnn_detect”,how can I install the nn_detect lib.

[Frank]

@sharbob Did you download the fenix and build it ?

[sharbob]

thank you for your reply，I have compiled it success

[jiapei100]

Yup, that is also my question?
How to build khadas / aml_npu_app ?

[numbqq]

Of course you can. About the source code, please check my first post carefully.

NPU Demo and source code

There are some ready to use NPU demo binaries for VIM3/VIM3L. This documentation is about how to run these demos on VIM3/VIM3L. Prepare You need to run Ubuntu image V20190830 on board, and update the system. Note: If the image is V20191231 or newer, you don’t need to do this anymore. khadas@Khadas:~$ sudo apt-get update khadas@Khadas:~$ sudo apt-get upgrade khadas@Khadas:~$ sudo apt-get install -y gstreamer1.0-libav gstreamer1.0-plugins-bad gstreamer1.0-tools gstreamer1.0-plugins-base gstrea…

[sharbob]

I run the binery directly using usb camera,but there is always something wrong with the display,as the picture shows,i don’t know the reason.

[numbqq]

Please switch to framebuffer console, Ctrl+Alt+F1 and try again.

[AKBAAR]

is there a way to run NPU on a camera in the network with ip ?

the camera is far out of reach but accessable through network router and has an ip… can i run the npu on that camera over IP