Hello, I think the Tone Board could possibly be mounted on a case slot cover. Not sure if side to side clearance with existing expansion cards in your PC would be a problem.
The Non-VIM version of the TB is narrower, as it has no mounted GPIO header.
If you have the room and you don’t like to solder, I assume the VIM version’s GPIO header could be used to connect the TB internally to an available USB header on your PC’s motherboard. NOTE: I have not tried this, I have no desktop PC at the moment, so proceed with caution.
As for electrical interference, I have no prediction on that.
With the case I have here, the control nuts would have to be put on with the slot cover installed, as they are wider than the slot’s opening.
Some pictures to get some ideas…
3 Likes