Hi, hyphop!
Great work with krescue! I’m new to SBC, and your tool gives more confidence I won’t break everything while testing different ROMs.
Are there any plans to improve KBI support in future versions? Especially the trigger part? I noticed there are some issues with switching WOL on different ROMs, also turning on dcin trigger might be very useful.
yes i will try to do soon ! ( WOL and some other triggers )
3 Likes
Time to bed now 
man, I’m not going to convince you 
, you can’t believe me, BUT what you propose to do with Khados Vim3L + Openwrt (remote storage), I can do it with a simple router (definitely worse performance) + openwrt (and this is more convenient since because router is always on) and I don’t need IR / RC + pcie + M2 + 40Gios (for Khados I bought a 512 GB SSD drive, but your engineers didn’t allow me to install it without buying an additional device at the price of +20 $ 
, although they could simply increase the case by 6 mm).
ohh man… I don’t know what you’re talking (don’t just install the OS… for example CoreElec, but try to configure it … install torrent services 
and use it for at least a few days and you will understand that the characteristics that you admire are not visually noticed :)… it will slow down with any remote control :)) the more so when compared with the android box 5 years ago :), the only difference is that the new processor heats up less)… or you have little choice or you look at the world through the eyes of a seller, but not a buyer (for 200 $ it makes no sense to buy a device on an arm processor . And where does the 200 $, why not 100 $ or 300 $?!? However, it doesn’t matter, initially it was about software support, and not about the technical characteristics of the device) .
I did not want to clog this thread with answers (but it would be impolite to leave unanswered), so I apologize (I will no longer distract from the discussion) :). I have a festive mood :), I wish you all good luck and success in the new year!
last Ubuntu for VIM1 VIM2 VIM3 VIM3L
VIMx.Ubuntu-xfce-bionic_Linux-4.9_arm64_V20191231
and
last Android for VIM3L
VIM3L.Android.Pie_V200103
7 Likes
yes ! its very easy ! we can install and replace any os ! without any software & sd card & pain 
GEL ONLINE help
curl -sfL dl.khadas.com/.mega | sh -s - --help
wget -O- dl.khadas.com/.mega | sh -s - --help
ONLINE WRITE Krescue system to emmc
curl -sfL dl.khadas.com/.mega | sh -s - VIM1 > /dev/mmcblk?
curl -sfL dl.khadas.com/.mega | sh -s - VIM2 > /dev/mmcblk?
curl -sfL dl.khadas.com/.mega | sh -s - VIM3 > /dev/mmcblk?
curl -sfL dl.khadas.com/.mega | sh -s - VIM3L > /dev/mmcblk?
or easy use auto-detect (detect VIM board name - only on runned VIM machine )
curl -sfL dl.khadas.com/.mega | sh -s - -X > /dev/mmcblk?
BOOT UP KRESCUE system
todo next simple steps
1) image WRITE to > EMMC
2) select any image | Download -> check_online_images -> download
3) PRESS OK
4) PRESS INSTALL
5) wait OK
6) eject SD & reboot
7) DONE => bootup new OS from emmc
MORE INFO EXAMPLES
PS: before install new os u can save current state and restore this anytime by same Krescue !
8 Likes
last improves for Krescue - shell installation read more by online commands
curl -sfL dl.khadas.com/.mega | sh -s - -h
its more safety now
- improved advanced board auto-detection
- safe and protect writes
- auto-detect emmc rewrites (goto RO mode)
- reject wrong destination for writes (safe you computer if u write wrong destitaions )
- many other improves
7 Likes
new COREELEC kresq images
VIM2.VIM1.COREELEC.9.2.1.emmc.kresq - VIM1 VIM2
VIM3x.COREELEC.9.2.nightly.emmc.kresq - VIM3 VIM3L
FULL OS LIST
curl -sfL dl.khadas.com/.mega | sh -s - --list
VIM1.Android.Pie_V190823.emmc.kresq
VIM1.LAKKA.2.3.pre.emmc.kresq
VIM2.Android.Nougat_V190518.emmc.kresq
VIM2.COREELEC.9.2.0.emmc.kresq
VIM2.LAKKA.2.3.pre.emmc.kresq
VIM2.VIM1.COREELEC.9.2.1.emmc.kresq
VIM3.Android.Pie_V191130.emmc.kresq
VIM3L.Android.Pie_V191130.emmc.kresq
VIM3L.Android.Pie_V200103.emmc.kresq
VIM3L.Android.TV_FINAL-v1.0-20191023.SC.emmc.kresq
VIM3L.COREELEC.9.2.0.emmc.kresq
VIM3x.COREELEC.9.2.nightly.emmc.kresq
VIM3x.EmuElec.ng.3.2.pre.emmc.kresq
VIMx.Debian.9.stretch.server.kernel-5.5.X.mainline.emmc.kresq
VIMx.OpenWrt.19.07.0.servers.test.emmc.kresq
VIMx.OpenWrt.servers.test.emmc.kresq
VIMx.Ubuntu-xfce-bionic_Linux-4.9_arm64_V20190917.emmc.kresq
VIMx.Ubuntu-xfce-bionic_Linux-4.9_arm64_V20191231.emmc.kresq
VIMx.Volumio.last.emmc.kresq
VIMx.Volumio.test.emmc.kresq
10 Likes
Hello.
I have a vim2 with nougat and a tone board vim.
I would like to use volumio to make the most of the tone board.
possible to keep nougat on vim2?
I am neither a programmer nor the like, I have a computer in dualboot, wind 10 and ubuntu 18.04 lts.
krescrue is very new to me, the video is good, but with the translation, it’s not always good.
I’ve been watching the video ten times, but it’s not all clear.
thanks for the help
2 Likes
its very easy !!! one of simple ways is !
- write Krescue to SD (u can use windows or linux for write image to SD )
- boot krescue from SD
- check ethernet connection on VIM board
- write any OS images by online
PS: krescue install all OS into EMMC
5 Likes
beautiful utility,
but when i try to flash ubuntu to EMMC using krescue and then i remove SD and reboot, my khadas keeps blinking 3 time continuously white led light and screen all black
it doesn’t seem to work for me boot to ubuntu.
what seems the problem you think?
2 Likes
u have problem only with UBUNTU image?
plz write more detail ! about your steps !
device model ? logs ? screenshots ? video ?
2 Likes
I haven’t used Krescue with Ubuntu
I have been flashing Android and CoreELEC.
BUT
When Krescue finishes I Do Not Pull Out SD Card and Reboot.
I choose Power OFF.
Then i pull out SD Card after it has Powered Down.
Then i Power on the Device.
1 Like
oh sorry, hehe am new to everything and i love the experience.
ok here we go sir.
at first I use Khadas VIM3pro and have downloaded Krescue to my SD as instructed. worked flawlessly.
then i downloaded https://dl.khadas.com/Firmware/Krescue/images/VIMx.Ubuntu-xfce-bionic_Linux-4.9_arm64_V20191231.emmc.kresq
and i put it in my SD download folder in the SD dump storage.
I insert the the SD and boot to MaskROM mode
I boot in to Krescue and choose number 2 : image WRITE to > EMMC
takes about 1 min 30 seconds. awesome.
than I poweroff remove SD. boot the Khads VIM3 Pro. now all i see is blackscreen for so long and the device is flashing 3 white led light continuesly . just keeps doing like that and my monitor doesnt turn on.
I use my PC as source power and my pc is high end. and am sure its not usb-c power because i aslo tried powersource from wall adapter.
but when i try other images like Android or EmuElec or COREELEC. all work flawless.
but not ubuntu image. i didt try other version yet. i just tried V20191231 ubuntu,
I also tried flashing my EMMC using
USB_Burning_Tool v2.x.x but it stops at 46% and this error pop up
UBOOT/Partition rootfs/Download buffer/Data tranfer error
Thank you in Advance for your hard work its amazingly helpful! all I want now is ubuntu!! to rock my world on my KHADS SBM!
Help Appreciated
1 Like
OK!
- u must sure u used last krescue system image for VIM3 is https://dl.khadas.com/Firmware/Krescue/dump/VIM3.krescue.sd.img.gz
- try another SD card ! or reformat SD card && redownload images
2 Likes
Any update on an EDGE-V version of Krescue?
hello.
I managed to use krescue and installed volumio, to test.
i tried lakka too.
it’s really good, there is no risk to emmc by force.
as requested.
@microdude
for edge v, that would be fine.
3 Likes
yeah i agree, its so fun chaging OSes whenever u want !! so sexy!! i luv it
still gona try to fix ubuntu not working for me… hmmm might be curopted download i donu but will report
1 Like
Is there a chance that krescue will soon be able to deploy a debian buster w/ kernel5.5 into a VIM1 (emmc) ?