Hardware volume

UPDATE: I tried the TB (tone board) with my Windows 10 PC and I got perfect playback from flacs to native DSD256 through foobar 2000. So the board is ok.
Then I tried a new Volumio setup on my Odroid C1+ and TB through USB. Perfect playback of flacs and DSD256 both with “none” mixer" and “hardware” mixer. DSDs playback wonderfully and volume is perfectly controlled from Volumio interface when in hardware mode! I had to resample setting only the sample rate to 384kHz otherwise I get “clicks”. “pops” and stuttering on DSD above 64.
Then I plugged it back to my main x86 Volumio player: same problems, ie no volume and white noise on DSD. So I tried a new Volumio installation though a USB key and voila, everything worked well!

2 Likes

Hello,

You mean that would be just an Os installation bug ?

Fabien

Exactly! An upgrade bug basically because I had the previous version of x86 Volumio installed an then upgraded to 2.555. So something went wrong during the update. Or maybe because I had three different DACs under test on this machine the conf file got “confused”. Anyway, it’s working perfectly now and I’m preparing my diy Volumio player based on an Intel NUC and the Khadas TB installed inside.

1 Like

Ok, that’s interesting.
Thanks ! :wink:

What’s the status on this, I would love to be able to use a volume knob or be able to use various different options for volume control.

It’s Draft

9 Likes

“It’s Draft”
You can call it that if you like I call it excellent :wink:
Needs a 3.5mm Headphone socket

4 Likes

Nice, but please conder that some people will want to put an amp on top of that box…
Will be possible to buy / install it on “old” tone boards or this will be a finished product only?

Will work for existing Tone Board.

Can you specify more details on this?

Have fun!

… And some will want to integrate it into their own box, player or amplifier, and connect their own custum rotary controller.

Offering single components and detailed documentation is best for everyone.

Possible to have a cable of some description from tone board to VIM maybe future design to consider ?

Thinking out loud
Like and IDE cable, more groovy looking of course :wink:

I usually have my amp (Arcam rHead) on top of the dac. From the picture it seems that if I will do that I will not be able to operate the volume control, besides the fact that the top doesn’t seem “plane”. Maybe a conventional “box” would be more usefull, I don’t know…

Wow. That is gorgeous. Excellent design work here. You could easily sell these for $300.

1 Like

We tend to label with half price :wink:

I do some tests with moOde OS (similar with Volumio) and there is no hardware control.
It is possible to have an update of firmware, like it was done before for Volumio?

Hi,
PM me on the Volumio forum, I’m working on an intermediate solution with Volumio on X86 and kernel 4.19.y, supporting most known DSD-capable USB Audio devices. A test version is already available for selected testers.
This version should bridge the time between the old Volumio jessie kernel (3.18.25) and Volumio on buster release with the latest 4.19 LTS release (or later).

Hi gkkpch,
What I am looking for is to may choose usb DAC (KTB) in the interface of moOde and also to have hardware volume. All these works in Volumio, I did test them with last version.
I suspect is either a firmware or kernel problem, despite the card is shown by moOde.
More information here:
http://moodeaudio.org/forum/showthread.php?tid=649
I did notice on this topic that for Volumio is was done something in the firmware, that is why I put the question.
Any help or opinion is appreciated.
I can not send you PM on Volumio forum.

Thanks

Hi! I tried to PM on volumio forum but I get the following message “Some users couldn’t be added as they have disabled private message receipt.”.

send an email to volumio@bluewin.ch

AlloDigiOne with ropieee -&gt -> spdif KTB-RCA -> Marantz integrated -RCA,This is ok, you can use the Marantz hardware volume control.