Can Anyone explaine the VIM GPIO Pinout can it use them as Arduino or Respberry Pi do some projects

[Terry]

You can refer to below picture and topics

How to access GPIO

Here is about how to access GPIO on Android and Ubuntu ###Preconditions The Rom must satisfy the following conditions Android M >= V170603 Android N >= V170421 Ubuntu Server >= V170515 Ubuntu Mate >= V170605 ###1. On Android GPIO List PIN GPIO Number PIN37 GPIOH5 176 PIN33 GPIOAO6 151 There are two ways to access GPIO: ADB Command Third-Party Applications ADB command Connect the vim with wifi adb: $ adb connect IP_ADDR Login the vim: $…

Use I2C on Khadas VIM

I’ve made the modifications to the mesongxl.dtsi file and loaded the kvim.dts file via tftp. /dev/i2c-2 shows up but the i2c lines doesn’t work. You can see the outputs bellow: khadas@Khadas:~/i2c-tools-1/tools$ ls /dev/i2c-* /dev/i2c-0 /dev/i2c-1 /dev/i2c-2 khadas@Khadas:~/i2c-tools-1/tools$ sudo chmod 0777 /dev/i2c-* khadas@Khadas:~/i2c-tools-1/tools$ ./i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- --…