It’s the same to Android.
Please refer to
It’s the same to Android.
Please refer to
I use Win32DiskImager to create USB Drive with Armbian and try boot via Keys mode. But I see black screen only. I need to install Android and then update VIM bootloader for multiboot from it?
With the support of @narmstrong , it was possible to get a working version of u-boot-2018 for all models of VIM2 (S912). I checked on the VIM2 Basic and Max, u-boot-2018 works with SD card and eMMC. This will allow you to use Linux in normal disk mode with the latest version of u-boot on all VIM2. For those who want to try the new u-boot-2018, I uploaded two files to the site, for VIM and VIM2.
I managed to install Armbian in EMMC with MBR version 5.59 with two partitions, a BOOT of 122MiB and ROOT of 57,47GiB, the first one is unallocated by 668MiB I do not know why.
Has interruptions to the network and boots pretty fast.
Which hub do you connect to 100Mb or 1Gb ?
Primary 700Mb is the service part when using the regular u-boot-2015. If you use u-boot-2018, it will be possible to exploit the full capacity of eMMC for the system (minus the 4MB service in the beginning to u-boot-2018).
We stopped the network and created another connection with modified parameters, now it works.
How to install u-boot 2018, I saved u-boot 2018 for VIM2.
Install u-boot-2018 eMMC easy (to download and burn the dd command to eMMC). But the big question is, what are you going to use it for ?
I do not know but I’m trying to learn.
What format does the partition do not see with gparted either
Please note that u-boot-2018 does not support all the features that u-boot-2015 has. It is intended primarily for Linux\Libreelec-9 users with the “4.1 x” kernel. If you created an MBR using a script from Armbian for u-boot-2015, you will be able to work with eMMC via gparted. But do not delete existing partitions or modify the MBR table.
Ok not delete existing partitions. With u-boot 2015 can i install kernel 3.14?
Thanks for your great work.
On one of my VIM2 I run 3_in_1 and copied VIM2/u-boot.bin (md5sum 3eeffb0193daf958a1d78714062a25ad) with dd to /dev/bootloader (I was booted in LE).
But now the box does not finish boot (I can provide serial log):
=> version U-Boot 2018.07-rc2-armbian (Sep 11 2018 - 17:36:32 +0300) khadas-vim2 aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011 GNU ld (Linaro_Binutils-2017.11) 18.104.22.16870706
The sdc_update command seems not available to revert back to previous u-boot from SD card.
I tried tftp as well and it timed out
=> tftp 1080000 u-boot.bin Speed: 1000, full duplex Using ethernet@c9410000 device TFTP from server 192.168.168.241; our IP address is 192.168.168.191 Filename 'u-boot.bin'. Load address: 0x1080000 Loading: #T T #T T #T ##T T #T T #T # Retry count exceeded; starting again
note that 192.168.168.241 could ping 192.168.168.191 during attempt:
standby /tftpboot # ping 192.168.168.191 PING 192.168.168.191 (192.168.168.191) 56(84) bytes of data. 64 bytes from 192.168.168.191: icmp_seq=1 ttl=64 time=0.167 ms 64 bytes from 192.168.168.191: icmp_seq=2 ttl=64 time=0.189 ms 64 bytes from 192.168.168.191: icmp_seq=3 ttl=64 time=0.187 ms ^C --- 192.168.168.191 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 119ms rtt min/avg/max/mdev = 0.167/0.181/0.189/0.009 ms
and tftpserver is correctly working on 192.168.168.241
desktop ~ # tftp standby tftp> get u-boot.bin tftp> quit desktop ~ # ls u-boot.bin u-boot.bin
Question: how shall I revert back to previous u-boot and/or adjust 2018 u-boot to work for 3_in_1?
I can use loadb to send previous u-boot from server disk to memory with kermit, but there is no store command to write to rom mmc. Perhaps another command exists?
Have a nice day
I warned you, you can not use u-boot-2018 in systems with Android partitions, he does not see them. To run from SD card latest version Armbian (kernel 4.18) VIM2 where you saved the u-boot-2015. Make a copy of the first 4 MB of eMMC (dd). Run this system on VIM2 with MultiOS And restore the first 4 MB to eMMC.
Thanks for reaction.
I must have misunderstood the u-boot-2018 purpose. My bad.
Sometimes translated text is not very clear to me in forum.
I am also not sure I understand restore procedure you kindly provide.
Note that I can no longer boot from SD. I tried with image Armbian_5.59_Aml-s9xxx_Ubuntu_bionic_default_4.18.0_20180908 and LibreELEC-S912.arm-9.0-devel-20180910093444-bdb5a5b.
I will contact you personally for specific instructions. I will document restoration here once successful.
Thanks for your valuable time !
Use version 5.55.
It has a built-in u-boot. There is no built-in u-boot in the 5.59 images (it needs to be written manually to the SD card after the image is written).
Thanks @balbes150 for kindly helping restore previous u-boot (2015)
[which I had replaced with 2018 one].
Note: I had a backup file from /dev/bootloader named bootloader.dd
(copied with dd) taken right before replacement. The dd bootloader size is 4MB.
Here is how to restore:
dd if=bootloader.dd of=/dev/mmcblk1
Done. My 3_in_1 survived the adventure.
Have a nice day.
I thought we fixed it, there is a solution to randomly disconnect the network, I use the last Armbian 5.59.
What exact command is given for U-BOOT EMMC backup?
There were no corrections.
dd if=/dev/ of=uboot_backup.img bs=1M count=4
Have the last Armbian 5.59 I have on the SD card and so it happens
eth0 Link encap:Ethernet HWaddr 92:b4:f0:96:d6:xx
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe8… Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:66459 errors:0 dropped:0 overruns:0 frame:0
TX packets:27677 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:76452482 (76.4 MB) TX bytes:3052445 (3.0 MB)
After dev / name of EMMC unit?
Yes. How could it be otherwise ?