Vim does not work anymore

I turned on the vim and it does not start anymore I have the version 1610-4916 I tried all the possible solutions and they did not work I only miss Serial Mode (For developers) I tried all the versions of android and linux without success
I am attaching a video posted by me on youtube


thank you

Hi. I hope any expert will reponse to you. I writed to you on YT’s comments. Ciao

To verify iron you can try to start the system from external media (SD card). For example, you can record on the SD card any way Armbian , add on SD card u-boot. Connect the SD card to the VIM and check the run in two modes (without circuit m-register and the closure of the m-register).

I came out only once the logo of the vim but did not do anything, I did the procedure again but nothing goes out, the problem and anyway remained thank you for your interest, you can tell me if with linux you can delete the mmc without installing anything
thank you

[15:04:19 670][Global][Inf]–Get system Info :
[15:04:19 670][Global][Inf]–Windows Version: Microsoft Windows 10, Bit: 64
[15:04:19 670][Global][Inf]–Scan usb device
[15:04:19 670][Global][Inf]–Aml scan WorldCup Device
[15:04:19 672][Global][Inf]–Host: Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E26
[15:04:19 672][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e26&subsys_50061458&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:19 672][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&232151f9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 734][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&69dda25&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 734][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port4]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port5]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port6]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port7]NoDeviceConnected
[15:04:19 734][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:19 734][Global][Inf]–Host: Controller host USB conforme a xHCI
[15:04:19 734][Global][Inf]–DevPath:\?\pci#ven_1106&dev_3432&subsys_50071458&rev_03#4&1828e751&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:19 734][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&152c84c1&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 734][Global][Inf]-------->[Port0]USB#VID_2109&PID_0811#6&390b8dc0&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 734][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:19 734][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port2]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port3]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port4]NoDeviceConnected
[15:04:19 735][Global][Inf]–Host: Controller host USB conforme a xHCI
[15:04:19 735][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e31&subsys_50071458&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:19 735][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&24618a5b&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 735][Global][Inf]-------->[Port0]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port2]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port3]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port4]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port5]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port6]NoDeviceConnected
[15:04:19 735][Global][Inf]-------->[Port7]NoDeviceConnected
[15:04:19 735][Global][Inf]–Host: Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E2D
[15:04:19 735][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e2d&subsys_50061458&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:19 735][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&282dcf3f&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 735][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&12b45e09&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 735][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:19 736][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:19 736][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:19 736][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:19 736][Global][Inf]---------->[Port4]NoDeviceConnected
[15:04:19 736][Global][Inf]---------->[Port5]USB#VID_14CD&PID_8601#6&265d47d&0&6#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 736][Global][Inf]------------>[Port0]NoDeviceConnected
[15:04:19 736][Global][Inf]------------>[Port1]USB#VID_14CD&PID_8601#7&dc15ef5&0&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 736][Global][Inf]-------------->[Port0]NoDeviceConnected
[15:04:19 737][Global][Inf]-------------->[Port1]Other device
[15:04:19 737][Global][Inf]-------------->[Port2]NoDeviceConnected
[15:04:19 737][Global][Inf]-------------->[Port3]NoDeviceConnected
[15:04:19 737][Global][Inf]------------>[Port2]USB#VID_14CD&PID_8601#7&dc15ef5&0&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:19 737][Global][Inf]-------------->[Port0]NoDeviceConnected
[15:04:19 737][Global][Inf]-------------->[Port1]NoDeviceConnected
[15:04:19 737][Global][Inf]-------------->[Port2]NoDeviceConnected
[15:04:19 737][Global][Inf]-------------->[Port3]Other device
[15:04:19 737][Global][Inf]------------>[Port3]NoDeviceConnected
[15:04:19 737][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:19 737][Global][Inf]–Scan USB host controller complete
[15:04:19 737][Global][Inf]–Update data center with HubMap
[15:04:27 123][Global][Inf]–Catch DBT_DEVICEARRIVAL
[15:04:27 124][Global][Inf]–Scan usb device
[15:04:27 124][Global][Inf]–Aml scan WorldCup Device
[15:04:27 124][Global][Inf]–Host: Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E26
[15:04:27 124][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e26&subsys_50061458&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:27 124][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&232151f9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 125][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&69dda25&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 125][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:27 125][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:27 125][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:27 125][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:27 125][Global][Inf]---------->[Port4]\?\usb#vid_1b8e&pid_c003#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[15:04:27 125][Global][Inf]---------->[Port5]NoDeviceConnected
[15:04:27 125][Global][Inf]---------->[Port6]NoDeviceConnected
[15:04:27 125][Global][Inf]---------->[Port7]NoDeviceConnected
[15:04:27 125][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:27 125][Global][Inf]–Host: Controller host USB conforme a xHCI
[15:04:27 125][Global][Inf]–DevPath:\?\pci#ven_1106&dev_3432&subsys_50071458&rev_03#4&1828e751&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:27 125][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&152c84c1&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 125][Global][Inf]-------->[Port0]USB#VID_2109&PID_0811#6&390b8dc0&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 126][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:27 126][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:27 126][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:27 126][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port2]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port3]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port4]NoDeviceConnected
[15:04:27 126][Global][Inf]–Host: Controller host USB conforme a xHCI
[15:04:27 126][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e31&subsys_50071458&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:27 126][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&24618a5b&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 126][Global][Inf]-------->[Port0]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port2]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port3]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port4]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port5]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port6]NoDeviceConnected
[15:04:27 126][Global][Inf]-------->[Port7]NoDeviceConnected
[15:04:27 127][Global][Inf]–Host: Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E2D
[15:04:27 127][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e2d&subsys_50061458&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:27 127][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&282dcf3f&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 127][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&12b45e09&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 127][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:27 127][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:27 127][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:27 127][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:27 127][Global][Inf]---------->[Port4]NoDeviceConnected
[15:04:27 127][Global][Inf]---------->[Port5]USB#VID_14CD&PID_8601#6&265d47d&0&6#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 127][Global][Inf]------------>[Port0]NoDeviceConnected
[15:04:27 127][Global][Inf]------------>[Port1]USB#VID_14CD&PID_8601#7&dc15ef5&0&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 127][Global][Inf]-------------->[Port0]NoDeviceConnected
[15:04:27 127][Global][Inf]-------------->[Port1]Other device
[15:04:27 127][Global][Inf]-------------->[Port2]NoDeviceConnected
[15:04:27 127][Global][Inf]-------------->[Port3]NoDeviceConnected
[15:04:27 127][Global][Inf]------------>[Port2]USB#VID_14CD&PID_8601#7&dc15ef5&0&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:27 128][Global][Inf]-------------->[Port0]NoDeviceConnected
[15:04:27 128][Global][Inf]-------------->[Port1]NoDeviceConnected
[15:04:27 128][Global][Inf]-------------->[Port2]NoDeviceConnected
[15:04:27 128][Global][Inf]-------------->[Port3]Other device
[15:04:27 128][Global][Inf]------------>[Port3]NoDeviceConnected
[15:04:27 128][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:27 128][Global][Inf]–Scan USB host controller complete
[15:04:27 128][Global][Inf]–Update data center with HubMap
[15:04:27 128][Global][Inf]–Insert new hub2
[15:04:27 128][Global][Inf]–Update hub2 device data
[15:04:27 128][Global][Inf]–Update HUB2-1
[15:04:27 128][HUB2-1][Inf]–Update device path
[15:04:27 128][Global][Inf]–Update HUB2-2
[15:04:27 128][HUB2-2][Inf]–Update device path
[15:04:27 128][Global][Inf]–Update HUB2-3
[15:04:27 128][HUB2-3][Inf]–Update device path
[15:04:27 128][Global][Inf]–Update HUB2-4
[15:04:27 128][HUB2-4][Inf]–Update device path
[15:04:27 128][Global][Inf]–Update HUB2-5 \?\usb#vid_1b8e&pid_c003#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[15:04:27 128][HUB2-5][Inf]–Update device path
[15:04:27 128][Global][Inf]–Begin thread for HUB2-5
[15:04:27 129][Global][Inf]–Burning thread HUB2-5 start
[15:04:27 129][Global][Inf]–Update HUB2-6
[15:04:27 129][Global][Inf]–Burning thread HUB2-5 begin run
[15:04:27 129][HUB2-6][Inf]–Update device path
[15:04:27 129][Global][Inf]–Update HUB2-7
[15:04:27 129][HUB2-7][Inf]–Update device path
[15:04:27 129][Global][Inf]–Update HUB2-8
[15:04:27 129][HUB2-8][Inf]–Update device path
[15:04:31 388][Global][Inf]–User click open button
[15:04:33 674][Global][Inf]–Image path C:\Users\Felice\Desktop\update.img
[15:04:38 180]Parse platform.conf
[15:04:38 181][Global][Inf]–Parsing burning package
[15:04:38 181][Global][Inf]–Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[15:04:38 181][Global][Inf]–Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[15:04:38 183][Global][Inf]–Get burning key
[15:04:40 541][Global][Inf]–User click start button
[15:04:40 541][Global][Inf]–SetErase
[15:04:40 541][Global][Inf]–Enable burning 1
[15:04:40 542][Global][Inf]–Scan usb device
[15:04:40 542][Global][Inf]–Aml scan WorldCup Device
[15:04:40 542][Global][Inf]–Host: Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E26
[15:04:40 542][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e26&subsys_50061458&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:40 542][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&232151f9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 542][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&69dda25&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 542][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:40 542][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:40 542][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port4]\?\usb#vid_1b8e&pid_c003#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[15:04:40 543][Global][Inf]---------->[Port5]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port6]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port7]NoDeviceConnected
[15:04:40 543][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:40 543][Global][Inf]–Host: Controller host USB conforme a xHCI
[15:04:40 543][Global][Inf]–DevPath:\?\pci#ven_1106&dev_3432&subsys_50071458&rev_03#4&1828e751&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:40 543][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&152c84c1&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 543][Global][Inf]-------->[Port0]USB#VID_2109&PID_0811#6&390b8dc0&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 543][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:40 543][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:40 543][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:40 543][Global][Inf]-------->[Port2]NoDeviceConnected
[15:04:40 543][Global][Inf]-------->[Port3]NoDeviceConnected
[15:04:40 543][Global][Inf]-------->[Port4]NoDeviceConnected
[15:04:40 544][Global][Inf]–Host: Controller host USB conforme a xHCI
[15:04:40 544][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e31&subsys_50071458&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:40 544][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&24618a5b&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 544][Global][Inf]-------->[Port0]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port2]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port3]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port4]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port5]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port6]NoDeviceConnected
[15:04:40 544][Global][Inf]-------->[Port7]NoDeviceConnected
[15:04:40 544][Global][Inf]–Host: Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E2D
[15:04:40 544][Global][Inf]–DevPath:\?\pci#ven_8086&dev_1e2d&subsys_50061458&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:04:40 544][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&282dcf3f&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 544][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&12b45e09&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 544][Global][Inf]---------->[Port0]NoDeviceConnected
[15:04:40 544][Global][Inf]---------->[Port1]NoDeviceConnected
[15:04:40 544][Global][Inf]---------->[Port2]NoDeviceConnected
[15:04:40 544][Global][Inf]---------->[Port3]NoDeviceConnected
[15:04:40 544][Global][Inf]---------->[Port4]NoDeviceConnected
[15:04:40 544][Global][Inf]---------->[Port5]USB#VID_14CD&PID_8601#6&265d47d&0&6#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 544][Global][Inf]------------>[Port0]NoDeviceConnected
[15:04:40 544][Global][Inf]------------>[Port1]USB#VID_14CD&PID_8601#7&dc15ef5&0&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 544][Global][Inf]-------------->[Port0]NoDeviceConnected
[15:04:40 545][Global][Inf]-------------->[Port1]Other device
[15:04:40 545][Global][Inf]-------------->[Port2]NoDeviceConnected
[15:04:40 545][Global][Inf]-------------->[Port3]NoDeviceConnected
[15:04:40 545][Global][Inf]------------>[Port2]USB#VID_14CD&PID_8601#7&dc15ef5&0&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:04:40 545][Global][Inf]-------------->[Port0]NoDeviceConnected
[15:04:40 545][Global][Inf]-------------->[Port1]NoDeviceConnected
[15:04:40 545][Global][Inf]-------------->[Port2]NoDeviceConnected
[15:04:40 545][Global][Inf]-------------->[Port3]Other device
[15:04:40 545][Global][Inf]------------>[Port3]NoDeviceConnected
[15:04:40 545][Global][Inf]-------->[Port1]NoDeviceConnected
[15:04:40 545][Global][Inf]–Scan USB host controller complete
[15:04:40 545][Global][Inf]–Update data center with HubMap
[15:04:40 545][Global][Inf]–Update hub2 device data
[15:04:40 545][Global][Inf]–Update HUB2-1
[15:04:40 545][HUB2-1][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-2
[15:04:40 545][HUB2-2][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-3
[15:04:40 545][HUB2-3][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-4
[15:04:40 545][HUB2-4][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-5 \?\usb#vid_1b8e&pid_c003#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[15:04:40 545][HUB2-5][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-6
[15:04:40 545][HUB2-6][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-7
[15:04:40 545][HUB2-7][Inf]–Update device path
[15:04:40 545][Global][Inf]–Update HUB2-8
[15:04:40 545][HUB2-8][Inf]–Update device path
[15:04:40 558][HUB2-5][Inf]–Open device handle \?\usb#vid_1b8e&pid_c003#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000390
[15:04:40 608][HUB2-5][Inf]–CloneImageProxy
[15:04:40 608][HUB2-5][Inf]–Connect path=Controller Enhanced Host USB per famiglia di chipset Intel® serie 7/C216 - 1E26/P0/P0/P4
[15:04:40 608][HUB2-5][Inf]–Start burning…
[15:04:40 659][HUB2-5][Inf]--------------ERASE BOOTLOADER------------
[15:04:41 159][HUB2-5][Inf]–2-2-0-0
[15:04:41 159][HUB2-5][Inf]-------------Download DDR.USB-----------
[15:04:41 159][HUB2-5][Inf]–2-2-0-0
[15:04:41 159][HUB2-5][Inf]–Control write pll reg1 0xd9000000:0x000000b1
[15:04:41 660][HUB2-5][Inf]–Control write pll reg1 0xd9000000:0x00005183
[15:04:42 160][HUB2-5][Inf]–Control write pll reg1 0xd9000000:0x000000b1
[15:04:42 661][HUB2-5][Inf]–Control write pll reg1 0xd9000000:0x00005183
[15:04:43 162][HUB2-5][Inf]–Write initial succeed
[15:04:43 162][HUB2-5][Inf]–Upload encrypt at 0xc8100228
[15:04:43 162][HUB2-5][Inf]–ulValue = 0xadfc318c
[15:04:43 162][HUB2-5][Inf]–Read encrypt value succeed
[15:04:43 171][HUB2-5][Inf]–Transfer complete
[15:04:43 171][HUB2-5][Inf]–Run at address 0xd9000000
[15:04:43 172][HUB2-5][Inf]–RunInRam succeed
[15:04:43 194][HUB2-5][Inf]–2-2-0-0
[15:04:43 194][HUB2-5][Inf]–CheckFileRunState succeed
[15:04:43 195][HUB2-5][Inf]–runResult:0x 0,paraMagic:0x7856efab
[15:04:43 195][HUB2-5][Inf]–ddrCapacity:0x 400
[15:04:43 195][HUB2-5][Inf]–2-2-0-0
[15:04:43 195][HUB2-5][Inf]–ulValue = 0xadfc318c
[15:04:43 195][HUB2-5][Inf]–Download UBOOT.USB buffer at 0x0200c000
[15:04:43 286][HUB2-5][Inf]–Transfer complete
[15:04:43 487][HUB2-5][Inf]–2-2-0-0
[15:04:43 487][HUB2-5][Inf]–Download DDR.USB buffer at 0xd9000000
[15:04:43 494][HUB2-5][Inf]–Transfer complete
[15:04:43 496][HUB2-5][Inf]–DownCheckPara succeed
[15:04:43 496][HUB2-5][Inf]–2-2-0-0
[15:04:43 496][HUB2-5][Inf]–Run at address 0xd9000000
[15:04:43 531][HUB2-5][Inf]–ReadCheckPara succeed
[15:04:43 531][HUB2-5][Inf]–2-2-0-0
[15:04:43 531][HUB2-5][Inf]–ulValue = 0xadfc318c
[15:04:43 531][HUB2-5][Inf]–Download DDR.USB buffer at 0xd9000000
[15:04:43 539][HUB2-5][Inf]–Transfer complete
[15:04:43 540][HUB2-5][Inf]–DownRunPara succeed
[15:04:43 540][HUB2-5][Inf]–2-2-0-0
[15:04:43 540][HUB2-5][Inf]–Run at address 0xd9000000
[15:04:53 615][HUB2-5][Inf]–Detect Device remove timeout
[15:04:53 615][HUB2-5][Inf]–Device is connected
[15:04:53 615][HUB2-5][Inf]–Close device handle 0x00000390
[15:04:53 665][HUB2-5][Inf]–Open device handle \?\usb#vid_1b8e&pid_c003#6&18d0524&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000a7c
[15:04:58 716][HUB2-5][Inf]–2-2-0-0
[15:04:58 716][HUB2-5][Err]–CheckFileRunState failed
[15:04:58 716][HUB2-5][Inf]–Failure : 1, FailureMax : 3
[15:04:59 217][HUB2-5][Err]–[15:04:59 217][HUB2-5][Inf]–Failure : 2, FailureMax : 3
[15:04:59 717][HUB2-5][Err]–[15:04:59 717][HUB2-5][Inf]–Failure : 3, FailureMax : 3
[15:04:59 747][HUB2-5][Err]–[0x10303004]Romcode/Switch status/Identify/Error result
[15:04:59 747][HUB2-5][Inf]–Close device handle 0x00000a7c

I purchased my KHADAS VIM2 MAX from GearBest on August 22nd for $166 Canadian.

Order # W1708220507493852

The device stopped working in 50 hours use. After several emails & requesting RMA form, I agreed to ship the device back to GearBest for $50.

Now they want $110. Canadian ($80USD) before they will repair and return to me.

This is not Warranty - when the device has a known problem with OVERHEATING.

VERY POOR CUSTOMER SERVICE.

Hi, Glen:
Sorry again for the troubles. At first I thought Gearbest have replied you a solution days ago.

I’ve just double confirmed with Gearbest again, and they told me that the VIM2 you shipped was deducted by the custom:

Gearbest will ship a new VIM2 device to you today, and you can also contact the custom service for the details.

If any problem, just let me know.

Thanks!