I have the schema, I refer if it is without VIM connected to USB to PC works or not?
Thank…
Yes, we have two editions, and both editions work out!
More details at:
Is there a way to connect it / put it in
RaspTouch Chassis
I connected the card for VIM (the version of VIM with extra connector 40 pin) to VIM via USB-C cable. Everything works. I think it will work on the PC (if the PC has a kernel with the necessary drivers).
Use the USB-C Port connect to Pasp‘s USB interface and you can refer http://forum.khadas.com/t/tone-board-manual/2338/2
What i meen is
Put the vim2 +tone in RaspTouch Chassis
Or is khadas working on a touch case solution of its own ?
VIMs support USB touch screen.
Thanks, from the schematic, so the xmos converts from usb to DAC…
Khadas Tone Board Unboxing Video on Youtube
4 Likes
I’ve get a tone board to germany ( tax etc. over 20,- € ) but where ist the user manual ? Thanx for the great board
just received mine as, well, is the DIY version supposed to have unsoldered 40pin socket ?
Actually, it’s Gerneric Edition, but you can solder by yourself 
More info at:
Hi, hoffmann:
Sorry for the late response!
Please check following for the user manual:
Arrived this day…Excellent thank Guys and Gals
First we will have a play with Windows 10 and Headphones, no stereo gear here where I play (yet)
Should be easy, find a RCA to 3.5mm socket and plug Headphone direct to RCA.
That was not the case, could not find one…Looking everywhere high and low nothing,
Not even a 3.5mm socket I could Hack and connect to RCA, my pile of junk has let me down.
Can get one easy online or a run to the shop…takes time.
More Looking, Looking,
As always when pulling PC cases to pieces or anything keep the junk may come in handy,
Found while looking, a front USB Microphone and Headset thingy, this will do the job 
Music to my ears,
Marked plugs are what normally plug into the MotherBoard of PC.
Soldered 3 Pins to the end of the Black cable that leads to 2 x RCA.
Plugging Sennheisers into the Green socket,
What a beautiful noise
Easy to set up in windows, Install driver. < Click
Plug in device to usb C and USB on Windows PC Done done
Find all the specs and set up http://forum.khadas.com/t/khadas-tone-board-user-manual-tbd/2478
Lots Features to be found
Just to mention a few,
Now to Purchase a few 3.5mm Stereo Sockets
and a RCA to 3.5mm Stereo cable…
Oh I would have done an unboxing but it had no Fancy box
Postman knocks, now we have the neat cable for the headphones.
7 Likes
Enybody nows how to connect an oled/display to the tone board?
Hello,
if I look into the shematic of the tone board at J10 (RCA Black ) it’s by default a spdif signal into the dac, but I can’t hear anything at the J5/6. There is no signal. What can I do, to get a signal ?
Which Edition you purchase? And you use with a PC or VIMs?
Thanks!
Hello Gouwa,
i’ve the vim edition and use it with the vim/vim2
Thanks for help
hi all,
I want to stick to ubuntu server linux on my VIM1 pro (no mate, no kodi, no vlc, only alsa or pulseaudio),
and I also need to test if my toneboard works well enough,
so what is the simple way to get good quality audio out of the RCA socket of the toneboard, from the command line , provided that a .mp4 or .acc or .ogg or .flac file is present in the current directory ??
tks !