I have the same i2s DAC (PCM5102) as the delletenebre, and Android Nougat V170612. During download, a digital noise of full volume appears on the output, which disappears only after the first sound of the system. After that everything is working fine, until the next off/on, or restart.
I tried Android Marshmallow V170603, but the situation has not changed. During download, a digital noise of full volume appears on the output, which disappears only after the first sound of the system.
@Gouwa@numbqq@Terry
You can test this Board with i2s in Linux (Ubuntu) ? With the current kernel in Ubuntu (DualOS v171028) already has support for i2s or need to perform additional operations (which are described in this topic) ?
can someone help me. I have a vim 2g/8g with libreelec 8.2.3.1 in mmc, but there is no chance to get the i2s signal. The connection is BCK <> GPIOH_7 (pin 29), DATA <> GPIOAO_9 (pin 31),LRCK <> GPIOH_8 (pin 32), gnd is pin 28. With the vim2 it works, but here no chance.
What can i do ? Thanks
To make this DAC work in ubuntu/linux, did you have to modify any config file or it just works by just connecting the board and it appears in sound output options?
Hello,
Just to point out that in my case I had to invert bck and sck (compared to @Gouwa message) to make it work in my pcm5102
so I connected
SCK → PIN30
BCK → PIN29
DIN → PIN31 / I2S_SDO
LCK → PIN32 / I2S_LCK
GND → PIN28 / GND
VIN → PIN27 / VCC3.3V
Putting SCK on a ground pin also works (it will use internal clock)