Cooling fan vim2 pin 0,80



I activated the cooling fan in android, but it does not work, with the pin in 0.8.

there is a fuse or other.

thank you


Hello, The fan I had had its leads reversed. So check carefully to make sure the fan’s actual plus and minus are actually going to the fan header’s + and -. The fan header’s polarity is marked on the PCB next to the header. Also check VIM2 schematic to make sure the right pins are being engaged.


of primer schema the threads are reversed, I will check


C’était bien ça, merci


Good to hear.
Have fun. :slight_smile: